Canon EF LENS TS-E24MM F/3.5L User manual

TS-E24mm f/3.5LTS-E24mm f/3.5L
TS-E45mm f/2.8TS-E45mm f/2.8
TS-E90mm f/2.8TS-E90mm f/2.8
Instructions
ENG

ENG-1
Canon’s TS-E lenses are tilt-shift lenses
designed for EOS cameras. The tilt-shift
mechanism enables photographers to control
the depth of field and the area photographed
and to correct image distortion, making it
possible to take sophisticated pictures that
cannot be shot using a conventional lens.
●To ensure that you make the most of the TS-E lens
functionality, it is recommended that you use it with
an EOS camera with 100% viewfinder visibility
(EOS-1, EOS-1D or EOS-1Ds series) and use the
laser matte with grid focusing screen Ec-D and a
tripod.
●On EOS cameras with a built-in flash, some partial
restrictions may apply to the shift and rotation
functions.
●On EOS cameras equipped with a grip for vertical
shooting, some partial restrictions may apply to the
shift and rotation functions.
Features
1. The lens can be tilted up to ±8° and shifted up
to ±11mm.
2. The tilt and shift functions can be used singly
or in combination.
3. The lens can be rotated to change the tilt or
shift direction.
Conventions used in this instruction
Warning to prevent lens or camera malfunction
or damage.
Supplementary notes on using the lens and
taking pictures.
Thank you for purchasing a Canon product.

ENG-2
aSafety Precautions
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Do not make any changes or modifications to the equipment
unless otherwise specified in the instructions. If such changes or
modifications should be made, you could be required to stop
operation of the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
aSafety Precautions
● Do not look at the sun or a bright light source
through the lens or camera. Doing so could result in
loss of vision. Looking at the sun directly through the
lens is especially hazardous.
● Whether it is attached to the camera or not, do not
leave the lens under the sun without the lens cap
attached. This is to prevent the lens from concentrating
the sun’s rays, which could cause a fire.
Handling Cautions
●If the lens is taken from a cold environment into a
warm one, condensation may develop on the lens
surface and internal parts. To prevent condensation
in this case, first put the lens into an airtight plastic bag
before taking it from a cold to warm environment. Then
take out the lens after it has warmed gradually. Do the
same when taking the lens from a warm environment
into a cold one.
●Do not leave the lens in excessive heat such as in a
car in direct sunlight. High temperatures can cause
the lens to malfunction.

ENG-3
Nomenclature
For detailed information, reference page numbers are provided in parentheses (→**).
Tilt knob (→7)
Lens mount index (→5)
Contacts
Shift index
Shift scale (→9)
Shift knob (→9)
Depth-of-Field scale (→11)
Distance scale (→5, 11)
Distance index
Infrared index (→11)
Tilt scale (→7)
Tilt index

ENG-4
Nomenclature
For detailed information, reference page numbers are provided in parentheses (→**).
Tilt lock knob (→7)
Rotation lock release button
(→10)
Shift lock knob (→9)
Filter mounting thread
(→14)
Lens
Hood mount (→13)
Focusing ring (→5)
Tilt index
Tilt scale (→7)
Shift index
Shift scale (→9)

ENG-5
1. Mounting and Detaching the Lens
Focus a TS-E lens by turning the focusing ring.
(Shots cannot be taken using the auto focus.)
See your camera’s instructions for details on
mounting and detaching the lens.
2. Focusing
●When mounting or detaching the lens, always
ensure that the tilt and shift scales are set to the
“0” position.
●After detaching the lens, place the lens with the
rear end up to prevent the lens surface and
contacts from getting scratched.
●If the contacts get soiled, scratched, or have
fingerprints on them, corrosion or faulty
connections can result. The camera and lens
may not operate properly.
●If the contacts get soiled or have fingerprints on
them, clean them with a soft cloth.
●If you remove the lens, cover it with the dust
cap. To attach it properly, align the lens mount
index and the index of the dust cap, and turn
clockwise. To remove it, reverse the order.
●After using tilt or shift, readjust the focus.
●The distance scale is only valid when the tilt
scale is set to the “0” position.

ENG-6
3. Tilt Function
Tilting inclines the lens relative to the image plane. When the tilt scale is set to the “0” position, the
focusing and imaging planes are parallel. However, tilting puts the focusing plane at an angle to the
imaging plane.
●Example 1 ●Example 2
To shoot so that all of an extensive subject is in focus, you must normally use a small aperture to
obtain a large depth of field. But tilting allows you to keep all of the subject in focus even when there
is insufficient depth of field (Example 1). Or, by tilting in the opposite direction, you can focus on a
specific part of the subject (Example 2).

ENG-7
Turn the tilt lock knob in the
direction of the arrow to lock
the amount of tilt for the
shot.
Loosen the tilt lock knob by
turning it in the direction of
the arrow.
Turn the tilt knob to adjust
the amount of tilt. Focus the
shot by turning the focusing
ring.
Using Tilt
●When you tilt the lens, sharp portions of the tilt mechanism are exposed and care should be taken to avoid
touching these portions.
●If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use them within the
area of the light-gray tilt scale settings. Tilting the lens to other settings may cause vignetting.
However, if the tilt function is used alone, none of the tilt scale settings cause vignetting.

ENG-8
4. Shift Function
Shifting moves the optical axis of the lens in parallel off the center of the imaging plane.
Shift can be used to good effect in the situations shown below.
●If you photograph a subject such as a
building with a normal lens, the top of
the building tapers away. But by placing
the camera parallel to the building and
shifting the lens, you can correct this
tapering effect.
●When you are shooting a reflective
subject, you can move the camera to a
position where the camera does not
appear in the shot and then use shift to
take the picture. This lets you keep the
camera out of the shot without having
to change the shot composition.

ENG-9
Using Shift
Turn the shift lock knob in
the direction of the arrow to
lock the amount of shift for
the shot.
Loosen the shift lock knob
by turning it in the direction
of the arrow.
Turn the shift knob to adjust
the amount of shift. Focus
the shot by turning the
focusing ring.
●When you shift the lens, sharp portions of the shift mechanism are exposed and care should be taken to
avoid touching these portions.
●If you use the tilt and shift functions on the TS-E24mm f/3.5L at the same time, only use them within the
area of the light-gray shift scale settings. Shifting the lens to other settings may cause vignetting.
With large amounts of shift, the amounts of peripheral light at the top and bottom or left and right sides of the
screen may differ, so shooting with a small aperture is recommended.

ENG-10
5. Rotation
The rotation function enables you to change the direction of tilt or
shift by rotating the tilt-shift mechanism.
With the lens mounted on the camera, push the rotation lock release
button towards the mount and then turn the tilt-shift mechanism.
●The mechanism can be rotated through ±90°. The lens clicks every 30° and
locks in place in the 90° position.
●When rotating the lens, set the tilt and shift scales to the “0” position.
●Note that rotating the tilt-shift mechanism quickly while pressing on the
rotation lock release button may cause the shift lock knob to strike your
fingers.

ENG-11
The depth of field is the distance in front of and
behind the plane of focus on the subject that
appears sharp. The depth of field is indicated by
the area between the depth-of-field scale lines
below the distance scale. The numbers on the
scale are F values, and for example, if the
shooting distance is 1.5 m and the aperture is
f/8, the area in focus will extend from about 1 m
to 3 m.
The infrared index corrects the focus setting
when using monochrome infrared film. Focus on
the subject in MF, then adjust the distance
setting by moving the focusing ring to the
corresponding infrared index mark.
6. Depth-of-Field Scale
(TS-E24mm f/3.5L)
7. Infrared Index
(TS-E24mm f/3.5L)
●The depth-of-field scale is only valid when the
tilt scale is set to the “0” position.
●The depth-of-field scale is an approximate
indicator.
●The infrared index position is based on a
wavelength of 800 nm.
●Be sure to observe the manufacturer’s
instructions when using infrared film.
●Use a red filter also when you take the picture.
Some EOS cameras cannot use infrared film. See
the instructions for your EOS camera.

ENG-12
8. TS-E Tripod Adapter (Sold Separately) 9. Exposure
With some camera models, the tilt, shift and
rotation functions can no longer be used when
the camera is mounted directly on a tripod.
When this happens, fit the optional TS-E tripod
adapter into the tripod mount socket on the
camera before mounting the camera on the
tripod.
Shots can be taken using AE (automatic
exposure) as long as the tilt and shift scales are
set to the “0” position.
The use of AE is not recommended when the
lens is tilted or shifted as exposure errors may
result. It is recommended that you use the
exposure values when the tilt and shift scales
are set to the “0” position as a guide and then
take the shot with as many exposure settings as
possible.

ENG-13
10. Hoods
The EW-75B II, EW-79B II and ES-65 III lens hoods can keep unwanted light out of the lens, and
also protects the lens from rain, snow, and dust.
Attach the hood using the following procedure.
1
2
1
TS-E24mm f/3.5L
Turn the hood in the direction of the arrow to attach it
securely.
TS-E45mm f/2.8 • TS-E90mm f/2.8
1) Pressing the buttons on the base of the hood inwards,
push the hood onto the hood mount on the lens.
2) Release the buttons so that the catches on the hood fit
into the grooves on the mount.

ENG-14
You can attach filters to the filter mounting
thread on the front of the lens.
11. Filters (Sold Separately)
Hoods
●Part of the picture may be blocked if the hood is
not attached properly.
●When attaching or detaching the hood, grasp
the base of the hood to turn it. To prevent
deformation, do not grasp the rim of the hood to
turn it.
The hood can be reverse-mounted on the lens for
storage.
●Only one filter may be attached.
●Use a polarizing Canon filter.
●To adjust the polarizing filter, first remove the
lens hood.

ENG-15
12. Extension Tubes
(Sold Separately)
You can attach extension tube EF12 II or EF25
II for magnified shots. The shooting distance
and magnification are shown below.
Attaching a 250D or 500D close-up lens enables
close-up photography. Compatibility with close-
up lenses is as follows.
TS-E24mm f/3.5L
• 250D: Cannot be used
• 500D (72mm): 0.19 to 0.05×
TS-E45mm f/2.8
• 250D: Cannot be used
• 500D (72mm): 0.25 to 0.09×
TS-E90mm f/2.8
• 250D (58mm): 0.69 to 0.36×
• 500D (58mm): 0.49 to 0.18×
13. Close-up Lenses
(Sold Separately)
EF12 II 171 179 0.62 0.49
EF25 II 166 167 1.21 1.10
Focusing Distance
Range (mm) Magnification (×)
Close
distance
Long
distance
Close
distance
Long
distance
TS-E24mm f/3.5L
EF12 II 239 299 0.44 0.27
EF25 II Cannot be used
Focusing Distance
Range (mm) Magnification (×)
Close
distance
Long
distance
Close
distance
Long
distance
TS-E45mm f/2.8
EF12 II 415 817 0.43 0.14
EF25 II 373 486 0.60 0.31
Focusing Distance
Range (mm) Magnification (×)
Close
distance
Long
distance
Close
distance
Long
distance
TS-E90mm f/2.8

ENG-16
Specifications
Each degree from 0 to
±6° (light gray),
±7° and ±8° (red)
Each mm from 0 to
±7mm (light gray),
±8 to ±11mm (red)
TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.8
Focal Length/Aperture 24mm f/3.5 45mm f/2.8 90mm f/2.8
Lens Construction 9 groups, 11 elements 9 groups, 10 elements 5 groups, 6 elements
Minimum Aperture f/22 f/22 f/32
Angle of View Diagonal
84° 51° 27°
(Normal)
Vertical 53° 30° 15° 11’
Horizontal 74° 44° 22° 37’
Min. Focusing Distance 0.3m (1.0ft.) 0.4m (1.3ft.) 0.5m (1.6ft.)
Max. Magnification 0.14×0.16×0.29×
Field of View 173 ×263mm 150 ×226mm 82 ×123mm
(6.8 ×10.4inch) (5.9 ×8.9inch) (3.2 ×4.8inch)
Tilt amount ±8°
Shift amount ±11mm
Tilt scale display Each degree from 0 to ±8° (light gray)
Shift scale display Each mm from 0 to ±11mm (light gray)
Rotation mechanism Locks at –90°, 0° and +90°, clicks every 30°

ENG-17
Specifications
●The lens length is measured from the mount surface to the front end of the lens. Add 21.5 mm
when including the lens cap and dust cap.
●The size and weight listed are for the lens only, except as indicated.
●The EF1.4×II/EF2×II extenders cannot be used with the lenses listed above.
●Aperture settings are specified on the camera.
●All data listed is measured according to Canon standards.
●Product specifications and appearance are subject to change without notice.
TS-E24mm f/3.5L TS-E45mm f/2.8 TS-E90mm f/2.8
Filter Diameter 72mm 58mm
Max. Diameter and Length 78 ×86.7mm (3.1 ×3.4inch) 81 ×90.1mm (3.2 ×3.5inch) 73.6 ×88mm (2.9 ×3.5inch)
Weight 570g (18.4oz) 645g (20.8oz) 565g (18.2oz)
Hood EW-75B II EW-79B II ES-65 III
Lens Cap E-72 E-58
Case LP1216 LP1016

CT1-7544-006 © CANON INC. 1991 2009.7

cauou
CT17600000
ENG EF LENS Quick Guide
Nomenclature
CD Contacts
® Lens mount index
® Focus mode switch
@ Focusing ring**
®Zoom ring**
®Zoom position index
(]) Image stabilizer switch
* The figures show you how to use the product. The
actual product may differfrom the figures.
** In some products, the positions of the focusing ring and
zoom
ring are in a reverse sequence to the figures.
Thank you for purchasing a Canon product.
• This guide shows the basic tips on how to use the Canon EF
lens.
Make sure you read this guide
in order to operate the lens
correctly and safely.
• For further details on how to use the product you purchased, see
the instruction (PDF format) stored
in the CD-ROM provided.
Using the "EF Lens Instructions" CD-ROM
1. Insert the EF Lens Instructions CD-ROM into your personal
computer.
Lt Never insert the CD-ROM into any drive incompatible with
CD-ROMs. If you insert the CD-ROM into a CD player and
try to play
it, it may damage your speakers. The loud noise
can also damage your ears if you are using headphones,
earphones, etc.
2. Select the drive containing the CD-ROM.
3. Select and open the "START.pdf" file.
0 Adobe Reader 6.0 or higher must be installed in the your
computer.
4. On the language menu, click on the desired language.
5. On the lens selection menu, click on the name of your lens to
open the lens instruction manual.
~ Safety Precautions
• Do not look at the sun or a bright light source through
the lens or camera. Doing so could result
in loss of vision.
Looking at the sun directly through the lens
is especially
hazardous.
• Whether it is attached to the camera or not, do not leave
the lens under the sun without the lens cap attached. This
is to prevent the lens from concentrating the sun's rays, which
could cause a fire.
Handling Cautions
• If the lens is taken from a cold environment into a warm
one, condensation may develop
on the lens surface and
internal parts.
To prevent condensation in this case, first
put the lens into
an airtight plastic bag before taking it from a
cold to warm environment. Then take out the lens after it has
warmed gradually. Do the same when taking the lens from a
warm environment into a cold one.
•
Do not leave the lens in excessive heat such as in a car in
direct sunlight. High temperatures can cause the lens to
malfunction.
FRN OBJECTIF EF Guide de demarrage rapide
Contacts
© Repere de monlage d'<Jbjectif
® cteur de mode de mise au point
@ Bague de mise au point**
® Bague de zoom**
® Index de position de zoom
(J) lnterrupteur de stabilisateur d'image
*
Les figures vous expliquent comment utiliser le produit. II est
possible que le veritable produit soil des figures.
** Dans certains produits, les positions de I mise au point et de Ia
bague de zoom son! dans une sequence ·e par rapport aux figures.
Nous vous remercions d'avoir achete un produit
Canon.
• Ce guide vous indique les conseils de base relatifs a!'utilisation
des objectifs Canon
EF.
Veillez alire ce guide afin d'utiliser l'objectif correctement et en
toute securite.
• Pour de plus
am pies details sur Ia fac;:on d'utiliser le produit que
vous avez achete, consultez les instructions (au format PDF)
enregistrees sur
le CD-ROM fourni.
Notice d'emploi du CD-ROM "EF Lens Mode d'emploi"
1. lnserez le CD-ROM EF Lens Mode d'emploi dans votre
ordinateur.
Lt N'inserezjamais le CD-ROM dans un lecteur non
compatible avec des CD-ROM. Si vous essayez de lire le
CD-ROM insere dans
un lecteur de disques compacts, il
pourrait endommager vos haut-parleurs. L'intensite du bruit
pourrait egalement abfmer vos tympans
si vous utilisez un
casque, des oreillettes, etc.
2. Selectionnez le lecteur contenant le CD-ROM.
3. Selectionnez le fichier "START.pdf" et ouvrez-le.
0 La version d'Adobe Reader 6.0 ou superieure doit etre
installee sur votre ordinateur.
4. Cliquez sur Ia langue souhaitee dans le menu des langues.
5. Cliquez sur le nom de votre objectif dans le menu de selection
des objectifs pour ouvrir le mode d'emploi de l'objectif.
~ Consignes de securite
• Ne regardez jamais le soleil ou une source de lumiere vive
atravers l'objectif ou l'appareil. Vous pourriez endommager
votre vue. Viser directement le solei! dans l'objectif est
particulierement dangereux.
• Que l'objectif soit monte ou non sur l'appareil, ne
le laissez pas expose au soleil sans le munir de son
bouchon. C'est pour eviler l'effet de Ioupe qui pourrait
declencher
un incendie.
Precautions d'utilisation
• Si l'objectif est amene d'un environnement froid aun
environnement chaud, de
Ia condensation risque de
se deposer sur
Ia surface de l'objectif et sur les pieces
internes. Pour eviler toute formation de condensation,
commencez par mettre l'objectif dans une poche
en plastique
etanche avant de le sortir dans
un environnement chaud. Puis
sortez l'objectif quand
if s'est peu apeu rechauffe. Faites de