Canon EOS-1D Mark II Digial Technical manual

- English -
EOS-1D X Mark II
Firmware Update Procedures
Precaution
A power failure during the firmware writing operation may disable the camera.
Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional) for the firmware update.
Do not shut off the power during the firmware writing operation.
Do not press any camera buttons during the firmware writing operation.
Do not open the card slot cover during the firmware writing operation.
Before the firmware update, please remove the lens, external Speedlite, and all other accessories from the
camera.

Firmware Update Procedures
In the following instructions, x.x.x. indicates either the current firmware version or the firmware version for the
update.
(1) Prepare the items required to update the firmware.
1. Camera body
2. Dedicated Battery Pack (The battery pack must be fully charged) or dedicated AC Adapter Kit
(Optional)
3. CF card (64MB or more, 256GB or less) or CFast card (64GB or more, 256GB or less)
4. Firmware update file (you can download it from Canon's Website.)
(2) Create the firmware update file.
1. Download the zipped self-extracting file from Canon's Website.
2. Extract the downloaded file, and create the firmware update file.
How to Extract the Firmware Update File
Windows
Right-click the zipped file, and then select [Extract All]. Select a destination folder to expand the file into,
and then select [Extract].
Macintosh
The downloaded file will automatically self-extract, creating the firmware update file.
In case the downloaded file does not automatically self-extract, double-click
the downloaded file.
3. Check the size of the firmware update file.
If the file size does not match, then download the firmware update file again.
How to Confirm the File Size
Windows
Right-click the icon of the firmware update file and select the [Properties] command from
the pop-up menu that appears.
Macintosh
Select the icon of the firmware update file, and then select the [Get Info] command from the
[File] menu.
4. The name and size of the firmware update file can be checked on the Web site.

In case of using the card reader, follow the procedure from Step (3) onward. In case of not using the card
reader, follow the procedure from Step (4-1) onward.
(3) Copy the firmware update file to the CF card (or CFast card).
1. Insert a CF card (or CFast card) that has been formatted in the Camera into the card reader.
2. Copy the firmware update file to the first window that appears when the CF card (or CFast card) is opened (the
root directory).
*If the firmware update file is placed in subfolder of the CF card (or CFast card), the camera will not see it.
3. Remove the CF card (or CFast card) from the card reader.
*When removing the CF card(or CFast card), be sure to do so as described in the documentation for the computer or the card
reader.
4. Insert the CF card (or CFast card) with the firmware into the camera.
5. Turn the Power Switch <ON>, and then press the <MENU> button to display the menu.
6. Rotate the Main Dial and the Quick Control Dial to select the "Firmware Ver.x.x.x" item at the bottom of the
“Set-up 4(Yellow)”, and then press the <SET> button.
7. The firmware update screen will appear.
Turn the Quick Control Dial, select [OK], and then press the <SET> button.
Follow the procedure from Step (5) onward.
*If the firmware update screen does not appear on LCD monitor, the firmware update file may not have been
properly copied to the CF card, so please try again starting from step (1).

Section (4-1) and later sections explain how to update the firmware using EOS Utility.
* EOS Utility Ver. 3 is used as an example for the explanation.
(4-1) Connect the camera and the computer.
1. Insert a CF card (or CFast card) that has been formatted in the camera into the camera.
2. Connect the camera and the computer with the USB cable, and then set the camera's power switch to <ON>.
(4-2) Start the firmware update.
1. Start EOS Utility.
2. Click the [Camera settings] button.
3. Click the [Firmware update] button.

4. The firmware version has been confirmed, so click [Next].
5. Please download the firmware update file, and after downloading, click [Next].
6. The selection window of the downloaded file will appear, so click [Browse] to select the file, and then click [Next].
7. A confirmation window appears so click [Next].

8. A window with cautionary messages about the update appears, so click [OK].
9. Follow the procedure from Step (5) onward on the camera.

(5) Update the firmware.
1. The screen will appear on the camera's LCD monitor.
2. If you press the <SET> button, a confirmation screen will appear, so check the firmware update shown, rotate the
Quick Control Dial to select [OK], and press the <SET> button again to start the firmware update.
3. The message will appear during the update.
* The firmware update takes approximately six minutes.
4. When the update is completed, the message will appear on the camera's LCD monitor.
5. Complete the firmware update by pressing the <SET> button.
The firmware update is now completed.
When the firmware update operations are finished, turn the camera <OFF> and remove battery from the camera for
at least two seconds. This will cause the new firmware to take effect after the battery has been reloaded and the
camera is turned on.
Format the CF card (or CFast card) before using it again.

Verifying the firmware Version
1. Turn the Power Switch <ON>, and press the <MENU> button.
2. Rotate the Main Dial and the Quick Control Dial, and you will see the "Firmware Ver.X.X.X" at the end of the
settings shown in “Set-up 4(Yellow)”.
3. This is the currently installed firmware version number.
If an ERROR message appears during the firmware update
If this screen appears, remove the battery and check to make sure that there are no problems with the battery
capacity or with the firmware update file on the CF card.
If there are no problems, repeat the update operations again.
If the problem persists, please contact the Canon Customer Support Center in your region.