Canon PowerShot SX530 HS Instruction Manual

Sending images to a computer (Wi-Fi function) (PowerShot SX530
HS, SX610 HS, and SX710 HS)

Getting Started
The procedure for using the Wi-Fi function to send images from a camera to a computer is explained in
the following four steps. Proceed in order from Step 1.
IMPORTANT
The position and shape of the operation buttons, screens displayed, and setting items may differ
depending on the model you use.
Step 1: Preparing necessary items
Step 2: Setting up the computer
Step 3: Connecting the camera to the computer
Step 4: Sending images to the computer

Step 1: Preparing necessary items
1. Check the computer`s specifications.
The camera can connect via Wi-Fi to computers running the following operating systems:
•Windows: Windows 8 / 8.1, Windows 7 Service Pack 1
•Macintosh: Mac OS X 10.8.2 or later, 10.9
IMPORTANT
•Windows 7 Starter and Home Basic editions are not supported.
•Windows 7 N (European version) and KN (South Korean version) require a separate download
and installation of Windows Media Feature Pack.
2. Confirm that an access point base unit (Wi-Fi router, etc.) is connected to the computer.
3. Make sure that the included CameraWindow* software is installed.
*The software is available for download from the Canon website.
NOTE
•A router is a device that creates a network (LAN) structure for connecting multiple computers. A
router that contains an internal Wi-Fi function is called a "Wi-Fi router".
•This page will refer to all Wi-Fi routers and base stations as "access points".
•When unsure of your computer setup, refer to the user manual provided with the computer.

Step 2: Setting up the computer (Windows only)
Even if your computer is connected to an access point, sending images from the camera to the computer
requires changing the computer`s settings. The procedure is explained below.
Windows 7 users, proceed to 2A: Windows 7
Windows 8 users, proceed to 2B: Windows 8
Mac users, proceed to Step 3: Connecting the camera to a computer.

•2A: Windows 7
2A-1. In the Start menu, click [All Programs] > [Canon Utilities].

2A-2. Click [CameraWindow] > [Wi-Fi connection setup].
2A-3. A screen similar to the one below will be displayed. Click [Yes].

2A-4. The following screen appears.
This concludes the steps for connecting a computer to a wireless LAN.
Please proceed to Step 3: Connecting the camera to a computer.
•2B: Windows 8
2B-1. Move the pointer to the bottom right of the screen to display the Charms, and then select
[Start].

2B-2. Click [Wi-Fi Connection Set-up] on the Start menu.
2B-3. A screen similar to the one below will be displayed. Click [Yes].
2B-4. The following screen appears.

This completes the Wi-Fi setting procedure for the computer.
Please proceed to Step 3: Connecting the camera to a computer.
Step 3: Connecting the camera to the computer
1. Press the <Playback> ( ) button to turn the camera on.
2. Press the <Wi-Fi> ( ) button.
NOTE
When setting up Wi-Fi for the first time, the camera nickname registration screen will be displayed.
This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-
Fi.

Press the [ ] button to display the keyboard, and use it to enter a nickname for the camera.
*You can change the device nickname (display name) that is displayed on the camera. To change the
nickname, press the [ ] button and use the keyboard displayed to enter a new nickname.
3. Press the [ ], [ ], [ ], [ ] buttons to choose ( ), and then press the [ ] button.

4. Press the [ ], [ ] buttons to choose [Add a Device], and then press the [ ] button.
NOTE
Once a computer is added, the computer name will be displayed on the screen in 4. To connect to a
computer again, simply choose the computer name from the list.
5. A list of detected access points will be displayed in the [Access Point Connect] screen.
Use the following method to connect with an access point.
5AConnecting to WPS-Compatible Access Points
5BConnecting to Access Points in the List
5CConnecting to an access point manually
NOTE
•WPS makes it easy to complete settings when connecting devices over Wi-Fi. You can use either
Push Button Configuration Method or PIN Method for settings on a WPS supported device. The
push button configuration method is used in the following explanation.
•Refer to the user guide provided with your access point to check if it supports WPS.
5AConnecting to WPS-Compatible Access Points.

5A-1. Press the [ ], [ ] buttons to choose [WPS Connection], and then press the [ ] button.
5A-2. Press the [ ], [ ] buttons to choose [PBC Method], and then press the [ ] button.

5A-3. On the access point, hold down the WPS connection button for a few seconds. On the camera,
press the [ ] button.
•The camera will connect to the access point.
•A list of computers connected to the access point will appear in the [Select a Device] screen.
NOTE
A WPS connection button is affixed to your access point (Wireless LAN, router, etc.). For further details
on the location and how many seconds to press it, refer to the user guide included with your access
point.
5A-4. When a connectible device is found, a screen like the one below will appear.
Touch the name of the computer you want to connect with.

A screen like the one below will appear.
If you are using Mac or Windows with the drivers installed, the screen will turn off after the connection
is terminated. Please proceed to Step 4: Sending images to a computer.
For Windows users, when connecting your camera to your computer wirelessly for the first time, the
display will not change during connection.
Please proceed to 6. Driver Installation.
5BConnecting to Access Points in the List
5B-1. The access point's password (encryption key / network key) is necessary for connection. To
determine the access point password, check on the access point itself or refer to the user manual.

NOTE
•Password (encryption key / network key)
-The key used when encrypting data during wireless transmission. Also called the "encryption key" or
"network key".
5B-2. Press the [ ], [ ] buttons to choose a network (access point), and then press the [ ] button.
5B-3. Press the [ ] button to access the keyboard, and then enter the encryption key, Choose
[Next], and press the [ ] button.

5B-4. Press the [ ], [ ] buttons to choose [Auto] and press the [ ] button.
5B-5. A list of devices connected to the access point will appear on the screen.
Press the [ ], [ ] buttons to choose the name of the computer you want to connect to, and then
press the [ ] button.

A screen like the one below will appear.
If you are using Mac or Windows with the drivers installed, the screen will turn off after the
connection is terminated. Please proceed to Step 4: Sending images to a computer.
For Windows users, when connecting your camera to your computer wirelessly for the first time,
the display will not change during connection.
Please proceed to 6. Driver Installation.
5CConnecting to an access point manually.
5C-1. The access point`s SSID/ESSID, security method, and password (encryption key / network key) are
all necessary for connection. Refer to the user guide included with your access point to look up
information on SSID/ESSID, Security method/encryption method, and password (encryption key /
network key).
NOTE
•The network name (SSID/ESSID) is the SSID or ESSID for the access point you use. Also called the
"access point name" or "network name".
•Security method/encryption method is the method for encrypting data during wireless
transmission.
•The password (encryption key / network key) is the key used when encrypting data during
wireless transmission. Also called the "encryption key" or "network key".

5C-2. Press the [ ], [ ] buttons to choose [Manual Settings] and press the [ ] button.
5C-3. Press the [ ] button and enter the SSID/ESSID key on the displayed keyboard. Choose
[Next] and press the [ ] button.
5C-4. Choose the Security method/encryption method.

5C-5. Press the [ ] button to access the keyboard, and then enter the encryption key. Choose
[Next], and then press the [ ] button.
5C-6. Press the [ ], [ ] buttons to choose [Auto], and then press the [ ] button.

5C-7. When a device is found, a screen like the following will appear.
Choose the name of the computer you want to connect to, and then press the [ ] button.