Canon PIXMA MX372 User manual

Setting Up Your MX372 In
Default Mode (Tel Priority Mode)
Without An Answering Machine
Next

Fax Easy Setup
NextPrevious
Click Next to step through this image-friendly version of Fax Easy Setup.
If you started Fax Easy Setup, on the fax machine’s operation panel, and
prefer to go through this image-friendly version…
Step 1
Press the FAX button at any screen
to go to fax standby mode.
Step 2
Click Next to proceed
through the setup.

Connecting The Phone Lines
NextPrevious

(Existing Phone Cord)
Wall Jack Hand Set
(Phone)
Fax to Phone Line Connection
NextPrevious 4
Before
After
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 5
•Plug the provided phone cord into the wall jack
(Phone Cord included with Canon printer)
Wall Jack
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 6
•Plug the provided phone cord into the “LINE” jack located on the
rear of the multifunction
(Existing Phone Cord)
Hand Set
(Phone)
Wall Jack
(Phone Cord included with Canon printer)

Fax to Phone Line Connection
NextPrevious 7
•Remove the white plug from the upper jack labeled “EXT.”
Wall Jack
(Phone Cord included with Canon printer)
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 8
•Plug the second phone cord into the “EXT.” jack located on the rear
of the multifunction
Wall Jack
(Phone Cord included with Canon printer)
(Existing Phone Cord)
Hand Set
(Phone)

Fax to Phone Line Connection
NextPrevious 9
•Plug the second phone cord into the phone
Wall Jack
(Phone Cord included with Canon printer)
(Existing Phone Cord)
Hand Set
(Phone)

Setting Up The Receive Mode
NextPrevious

Step 1
Turn on the MX372 by pressing the
ON button if it is not powered on
already.
Step 2
Press the FAX button.
NextPrevious 11

Step 3
The fax standby screen will appear.
Step 4
Press the Menu button.
NextPrevious 12

Step 5
The FAX menu screen will appear.
Step 6
Use the LEFT or RIGHT button to
select “Receive mode set”.
NextPrevious 13

Step 7
Press the OK button.
Step 8
Use the LEFT or RIGHT button to
select “TEL priority mode”.
NextPrevious 14

Step 9
Press the OK button.
Step 10
Use the LEFT or RIGHT button to
select “Yes” at Make adv. settings
screen.
NextPrevious 15

Step 11
Press the OK button.
Step 12
Use the LEFT or RIGHT button to
select “User-friendly RX”.
NextPrevious 16

Step 13
Press the OK button.
Step 14
Use the LEFT or RIGHT button to
select “ON”.
NextPrevious 17

Step 15
Press the OK button.
Step 16
You will return to the “Fax standby
screen” and the receive mode will
appear on the screen.
NextPrevious 18

Receiving A Fax
To receive a fax:
•Pick up the handset on the phone connected to the MX372.
•Listen for fax tones.
•When the tones stop hang up the handset.
•The MX372 will receive the fax document.
IMPORTANT:In order to receive a fax, you must pick up the handset on a
phone that is connected to the multifunction.
Previous 19