Cantek KQ0824 Series User manual

Standalone Digital Video Recorder
Premium DVR
4, 8, 16 Channel Models
User`s Manual
MADE IN KOREA
M2923KQCR
This document contains preliminary information and is subject to change without notice.
KQ3

2
FCC Compliance Statement
Notice to Users:This equipment has been tested and found to comply with the limits for a Class A digital device. Pursuant to Part
15 of the FCC Rules, these limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at own expense.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
ATTENTION
Des changements ou des modifications non expressément approuvées par le responsable de la conformité pourraient annuler l'autorisation
de l'utilisateur à exploiter l'équipement.
The equipment complies with the requirement of FCC CFR 47 PART 15 SUBPART B, Class A.
Explanation of Graphical Symbols
Warnings
Installation and servicing should be performed only by qualified and experienced personnel.
Power off the DVR when connecting cameras, audio, or sensor cables.
The manufacturer is not responsible for any damage caused by improper use of the product or failure to follow instructions for
the product.
The manufacturer is not responsible for any problems caused by or resulting from the user physically opening the DVR for
examination or attempting to fix the unit.
The manufacturer may not be held liable for any issues with the unit if any labels are removed in the product.
This symbol indicates the presence of important operating and maintenance (servicing) instruction in the
literature accompanying the product.
This symbol indicates the presence of non-insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Ce symbole indique la présence d’instructions importantes et de maintenances dans le manuel
accompagnant le produit
Ce symbole indique la présence de « haute tension » non-isolé dans le produit qui peut avoir pour
conséquence un risque de la décharge électrique aux personnes.

3
Cautions
This product has free voltages (100V ~ 240V). See installation instructions before connecting to the power supply.
This product uses a Lithium battery.
To avoid any risk of explosion, do not replace the battery on the main board by anything other than a Lithium battery.
Dispose of used batteries according to the manufacturer’s instructions.
This equipment and all communication wirings are intended for indoor use only.
To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
WEEE(Waste Electrical and Electronic Equipment)
Important Safeguards
1. Read Instructions
To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for
cleaning.
4. Attachments
Never add any attachments and/or equipment without manufacturer approval as such additions may result in the risk of fire,
electric shock, or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Accessories
Do not place this equipment on an unstable cart, stand or table. The equipment may fall, causing serious injury to a child or
adult and serious damage to the equipment.
Wall or shelf mounting should follow the manufacturer’s instructions and should use a mounting kit approved by the
manufacturer.
Move this equipment and cart combination with care. Quick stops, excessive force and uneven surfaces may cause the
equipment and cart combination to overturn.
7. Power Sources
This equipment should be operated only from the type of power source indicated on the marking label. If not sure the type of
power, please consult to distributor or local power company.
8. Power Cords
Operator or installer must remove power, BNC, alarm and other connections before moving the equipment.
9. Lightning
For added protection for this equipment during a lightning storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment
due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets and extension cords to avoid the risk of fire or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the equipment.
Customers in European Union countries are advised to dispose this product, at the end of its
useful life, as per applicable local laws, regulations and procedures.

4
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing to qualified service personnel.
13. Damage Requiring Service
Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
①When the power-supply cord or the plug has been damaged.
②If liquid is spilled or objects have fallen into the equipment.
③If the equipment has been exposed to rain or water.
④If the equipment does not operate normally by following the operating instructions, adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will often
require extensive work by a qualified technician to restore the equipment to its normal operation.
⑤If the equipment has been dropped or damaged the cabinet.
⑥When the equipment exhibits a distinct change in performance—this indicates a need for service.
14. Replacement Parts
When replacement parts are required, ensure the service technician uses replacement parts specified by the manufacturer
or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or
other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the service technician to perform safety checks to
determine that the equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualified service person and should conform to all local codes.
17. Correct Batteries
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
ATTENTION
RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UN TYPE INCORRECT
DISPOSEZ DE BATTERIES EN ACCORS AVEC LES INSTRUCTIONS
18. Operating Temperature
An operating temperature range is specified so that the customer and installer may determine a suitable operating
environment for the equipment.
19. Elevated Operating Ambient Temperature
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be
greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment
compatible with the specified operating temperature range.
20. Reduced Air Flow
Installation of the equipment in the rack should be such that the amount of airflow required for safe operation of the
equipment is not compromised.
21. Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous condition is not caused by uneven mechanical
loading.
22. Circuit Overloading
Consideration should be given to connection of the equipment to supply circuit and the effect that overloading of circuits
might have on over-current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should
be used when addressing this concern.
23. Grounding (Earthing)
Connection of ground wire is highly recommended to protect the DVR from external electric shock, such as lightening,
electrical surge.
Warning
Warranty is void if seal or label is removed or damaged.

5
The List of Configuration
DVR Set
A Type : 4 CH
B Type : 4CH
C, D, E and F Type : 4 / 8 / 16CH
Manual / CMS CD
Remote Controller
Manual
Screws
HDD Brackets
Rack Bracket
(Except A and B Type Model)
Data Cable
Power Cable
Adapter
(Except C(8/16CH), D, E and F Type Model)

6
Operation Precautions
Power Off
Do not turn DVR off, or plug off the power adapter while DVR is in operation (record/playback). Otherwise, it may cause
permanent damage to the equipment. Please click () SETUP>SYSTEM>Shutdown sequentially and then remove the
power after DVR is shutdown completely. It is safe to wait for 5 seconds before turning the power on again.
Do not turn DVR off, or plug off the power adapter while External storage device (e.g., USB memory stick, removable
external hard disk and the like) in use. Otherwise, it may cause permanent damage to the equipment. Make sure that the
power switch is in the “ON” position until data storage is completed. Please be aware that removing the storage device
cause the same damage to the equipment.
Do not turn DVR off, or plug off the power adapter during the format of the hard disk. Otherwise, it may cause permanent
damage to the equipment. Make sure that the power switch is in the “ON” position until the formatting of the disk is
completed.
HDD Installation / Addition / Moving / Replacement / Removal
For installation/addition/replacement/Removal of HDD (DVD-RW), make sure that DVR is turned off. Otherwise, it may
cause permanent damage to the HDD (DVD-RW).
When wish to power DVR off, please click () SETUP>SYSTEM>Shutdown sequentially and then remove the power after
DVR is shut down completely.
Installation/Addition/Moving/Replacement: Start ‘HDD initialization’ including formatting. Otherwise, DVR would not
recognize the hard disk and may begin to function abnormally. Please follow the below procedure for ‘HDD initialization’.
①(Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time).
②(Initialization of system setup) All setup values are restored to original factory default settings.
(SETUP>SYSTEM>Information>Status>Setup>Default).
③(HDD format) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs,
each must be formatted, separately. When the format is completed, DVR will auto-reboot.
Removal: Follow the Remove procedure even when a pre-installed hard disk has been removed.
-SETUP>SYSTEM>Admin>Storage>Format, click () ‘Removed’ item under the discrete Format headings of a
corresponding HDD to discard ‘HDD’ item. When the Remove procedure is completed, DVR will auto-reboot.
Date / Time Change
Any change in Date/Time is immediately applied onto live video (LIVE), but the date/time when the recording was done are
not changed.
Make sure to reboot DVR after adjusting the Date/Time.
Also, do not forget to execute SETUP>SYSTEM>Shutdown in sequence before reboot.
Upgrade
Do not upgrade until install a hard disk drive. Make sure that upgrade when the hard disk drive is in proper operation.
Using a Mouse
Left mouse button: have the same function as Enter () on the Front panel of DVR.
Central button (wheel): have the same function as Search key on the Front panel of DVR(display search menu).
Right mouse button: display a number of ‘Function keys’ (please see ‘Input Device and Screen Icons>Using a mouse’ in
this manual).
PLAY / PAUSE Key
Press the PLAY/PAUSE key to one-touch playback on the viewing screen (playback the recorded video from the last one
minute).
Every time pressing the PLAY/PAUSE key during playback mode, it is changed to ‘1X PLAY’ and ‘PAUSE’. The displayed
sign on the screen also changes from to II.
If wish to change mode (1X PLAY, REW, FF, BACKWARD, FORWARD) during playback, always press the PLAY/PAUSE
key first (please see if the sign II is shown on the screen).
Press the PLAY/PAUSE key to back up. Make sure that the backup is done in ‘PAUSE’ mode.
Camera Title
Camera Title displayed in Record and Playback modes of DVR is set to CAM1 ~CAM16. Registering camera title in setup
menu (DEVICES>Camera/PTZ>Title) is to make every setup process easier.

7
Table of Contents
Server
1. PRODUCT FEATURES............................................... 12
1.1 Unpacking................................................................ 12
1.2 Service..................................................................... 12
1.3 System Connection Diagram ................................... 12
2. INSTALLATION .......................................................... 18
2.1 Hard disk and DVD-RW Installation......................... 18
2.1.1 SATA Port.............................................................. 18
2.1.3 HDD Installation ..................................................... 19
2.1.4 Maximum HDD Capacity........................................ 20
2.1.5 DVD-RW installation............................................... 20
2.2 Connector Wiring ..................................................... 20
2.2.1 Video-In/Loop Out Connections............................. 20
2.2.2 HD-SDI Camera Input Format................................ 20
2.2.3 HD-SDI Input Signal detection ............................... 21
2.2.4 Monitor Connections (Video Out, VGA and Spot) .. 21
2.2.5 HDMI connections.................................................. 21
2.2.6 Audio Connections................................................. 21
2.2.7 TCP/IP(Ethernet) Connections............................... 21
2.2.8 Alarm Connections................................................. 22
2.2.9 RS-485/422 Connections....................................... 22
2.2.10 USB Connections................................................. 22
2.2.11 RS-232 Connections............................................ 22
2.2.12 Factory Reset Switch ........................................... 22
2.2.13 Power Supply connections................................... 22
2.2.14 Connections Guideline......................................... 22
3. INPUT DEVICE AND SCREEN ICONS....................... 23
3.1 Key and LEDs.......................................................... 23
3.2 Camera Select Keys for 16 Channel DVR ............... 25
3.3 Front Panel .............................................................. 25
3.4 Using a Remote Controller....................................... 26
3.5 Using a Mouse......................................................... 26
3.6 Screen Icon.............................................................. 27
4. SETUP......................................................................... 28
4.1 Login / Logout .......................................................... 28
4.2 SYSTEM.................................................................. 29
4.2.1 Information............................................................. 29
4.2.2 Admin......................................................................32
4.2.3 Account...................................................................35
4.2.4 System Log.............................................................37
4.2.5 Exit..........................................................................38
4.2.6 Shutdown................................................................38
4.3 DISPLAY ..................................................................38
4.3.1 OSD........................................................................38
4.3.2 Main Monitor...........................................................39
4.3.3 Spot Monitor ...........................................................40
4.3.4 Spot Monitor Control on Display Mode ...................40
4.3.5 VGA........................................................................41
4.4 DEVICES..................................................................42
4.4.1 Network...................................................................42
4.4.2 Camera / PTZ.........................................................46
4.4.3 Audio.......................................................................47
4.4.4 Alarm In ..................................................................47
4.4.5 Alarm Out................................................................48
4.4.6 Serial In...................................................................48
4.5 RECORD..................................................................48
4.5.1 Setting.....................................................................49
4.5.2 Schedule.................................................................53
4.5.3 Pre Alarm................................................................54
4.5.4 Motion Detection.....................................................56
4.5.5 Holiday....................................................................56
4.6 LINK..........................................................................57
4.6.1 Alarm In ..................................................................57
4.6.2 Motion Event...........................................................58
4.6.3 Video Loss..............................................................58
4.6.4 System Event..........................................................59
4.6.5 Popup Link..............................................................59
5. OPERATION INSTRUCTION ......................................60
5.1 Viewing.....................................................................60
5.1.1 First Images............................................................60
5.1.2 View Format............................................................61
5.1.3 Digital Zoom............................................................61
5.1.4 Freeze Live Image..................................................61
5.1.5 Pan / Tilt Control.....................................................61
5.1.6 System Log.............................................................62
5.1.7 Key Lock.................................................................63
5.1.8 Emergency Recording ............................................63
5.2 Search......................................................................63
5.2.1 Date / Time Search.................................................63
5.2.2 Calendar Search.....................................................64
5.2.3 Event Search..........................................................65
5.3 Playback...................................................................65

8
5.4 One-touch Playback................................................. 66
5.5 Digital Zoom in Playback.......................................... 66
5.6 Archive..................................................................... 67
5.7 Menu Bar ................................................................. 68
5.8 Color Control and Position....................................... 69
5.9 Alarm Out Control .................................................... 69
6. CMS............................................................................. 71
6.1 PROGRAM INSTALLATIONS ..................................... 71
6.1.1 System Recommendations........................................ 71
6.1.2 Program Installation Method...................................... 71
6.1.3 Login.......................................................................... 72
6.2 FUNCTION AND INSTRUCTIONS.............................. 73
6.3 WATCH MODE............................................................ 74
6.3.1 LOGIN Screen ........................................................... 74
6.3.2 Local Setting.............................................................. 74
6.3.2.1 System Setup...................................................... 74
6.3.2.2 Remote Site ........................................................ 75
6.3.3 Live Video.................................................................. 77
6.3.3.1 Network Connection............................................ 77
6.3.3.2 Watch Mode........................................................ 78
6.3.3.3 Multi Screen ........................................................ 79
6.3.3.4 Screen Color Adjustment .................................... 79
6.3.4 Audio...................................................................... 80
6.3.4.1 System Log......................................................... 80
6.3.4.2 Alarm Out............................................................ 80
6.3.4.3 One touch Recording .......................................... 80
6.3.5 PTZ Control ............................................................... 80
6.3.6 Health Check............................................................. 82
6.3.6.1 Camera connections and Operating Status......... 82
6.3.6.2 HDD connections and Operating Status.............. 82
6.3.6.3 Recording Status................................................. 82
6.3.6.4 Motion Recording Status..................................... 83
6.3.6.5 Alarm In Connection and Operating Status......... 83
6.3.6.6 Alarm Out Connection and Operating Status ...... 83
6.3.7 Remote Setting.......................................................... 83
6.4 SEARCH MODE.......................................................... 84
6.4.1 Search Screen........................................................... 84
6.4.2 Remote Search ..........................................................85
6.4.3 Local Search ..............................................................85
6.4.4 Event Search..............................................................86
6.4.5 Playback.....................................................................86
6.4.5.1 Playback Control Button ......................................86
6.4.5.2 Print .....................................................................87
6.4.5.3 Save.....................................................................87
6.4.5.4 Archive.................................................................88
6.5 OTHERS......................................................................89
6.5.1 Viewer ........................................................................89
6.5.2 E-MAP........................................................................90
6.5.3 Watermark Check System..........................................91
6.5.4 Estimator....................................................................91
6.5.5 EXE to AVI Converter.................................................92
7. CMS PRO ....................................................................94
7.1 CMS PRO FEATURES ................................................95
7.1.1 Introduction.................................................................95
7.1.2 Features.....................................................................95
7.1.3 System Requirements................................................95
7.2 INSTALLATION............................................................96
7.2.1 Software Installation...................................................96
7.2.2 Login...........................................................................98
7.2.2.1 Login Process......................................................98
7.3 MENU...........................................................................99
7.4 SETUP.......................................................................100
7.4.1 Local Setup - Device ................................................100
7.4.1.1 Remote Site Connection Setup..........................100
7.4.1.1.1. New Device Register................................100
7.1.1.1.2. Edit Registered Site..................................101
7.4.1.1.3. Remove Registered Site ..........................102
7.4.1.2 Device Group Setup...........................................102
7.4.1.2.1. New Grouping Setting ..............................102
7.4.1.2.2. Edit Group Setting....................................102
7.4.1.2.3. Remove Group Setting.............................102
7.4.2 Local Setup - Environment.......................................103
7.4.2.1 System...............................................................103

9
7.4.2.2 Viewer............................................................... 103
7.4.2.2.1. Audio ....................................................... 103
7.4.2.2.2. Video Display........................................... 103
7.4.2.3 Record............................................................... 104
7.4.2.4 Setup................................................................. 104
7.4.2.5 Instant Playback................................................ 105
7.4.3 Local Setup - Account.......................................... 105
7.4.3.1 Add User Account ............................................. 106
7.4.3.2 Edit User Account.............................................. 106
7.4.3.3 Remove User Account ...................................... 106
7.4.3.4 Login Setting..................................................... 106
7.4.4 Local Setup –E-map............................................ 107
7.4.4.1 Registering a New E-map ................................. 107
7.4.4.2 Remote Device Setup ....................................... 109
7.4.4.3 Change Password............................................. 109
7.4.5 Help...................................................................... 110
7.4.5.1 About................................................................. 110
7.5 VIEW ......................................................................... 111
7.5.2 Server List................................................................ 111
7.5.3 Remote Device System Log .................................... 111
7.5.4 Remote Device Event Log....................................... 112
7.5.5 CMS System Log..................................................... 113
7.5.6 Health Check........................................................... 114
7.5.7 Show All Windows ................................................... 115
7.6 APPLICATION........................................................... 116
7.6.1 Search ..................................................................... 116
7.6.2 Exit........................................................................... 116
7.7 LIVE (LIVE VIDEO MONITORING SYSTEM)............ 117
7.7.1 Overview.................................................................. 117
7.7.2 Live Monitor Menu ................................................... 117
7.7.2.1 Full Screen On .................................................. 118
7.7.2.2 Auto Sequence.................................................. 118
7.7.2.3 Instant Playback................................................ 118
7.7.2.4 Digital Zoom...................................................... 119
7.7.2.5 PTZ Control....................................................... 120
7.7.2.6 Screen Capture & Print ..................................... 121
7.7.2.7 Audio On/Off ..................................................... 123
7.7.2.8 Mike On/Off....................................................... 123
7.7.2.9 Instant Recording.............................................. 124
7.7.2.10 Display Option................................................. 125
7.7.3 Screen Layout Control............................................. 125
7.7.4 Change Division Display.......................................... 126
7.7.5 Sequencing ..............................................................126
7.7.6 Audio Volume Control...............................................127
7.8 SEARCH....................................................................128
7.8.1 Overview ..................................................................128
7.8.2 Time Bar Search ......................................................128
7.8.3 Event Search............................................................129
7.8.4 POS/ATM Search.....................................................130
7.8.5 Thumbnail Search ....................................................131
7.8.6 Smart Search ...........................................................131
7.9 E-MAP........................................................................132
7.9.1 Overview ..................................................................132
7.9.2 Controls....................................................................132
7.9.2.1 E-map Camera –Instant Playback ....................132
7.9.2.2 Alarm In/Out Control..........................................133
7.9.2.3 Audio..................................................................133
7.10UNINSTALLING CMS PRO .......................................134
8. ICMS VIEWER...........................................................136
8.6 System Recommendations.....................................136
8.6.1 Program installation Method .................................136
8.7 Login.......................................................................137
8.8 Watch Mode ...........................................................137
8.8.1 Log-in Screen .......................................................137
8.8.2 Local Setting.........................................................138
8.8.3 Live.......................................................................141
8.9 Search Mode..........................................................145
8.9.1 Date/Time Search.................................................145
8.9.2 Event Search........................................................146
8.9.3 POS/ATM..............................................................147
8.10 Disconnection .....................................................148
8.11 Uninstallation ......................................................149
9. XCMS VIEWER..........................................................151
9.6 System Recommendations.....................................151
9.6.1 Program Installation Method.................................151
9.7 Login.......................................................................153
9.8 Watch Mode ...........................................................153

10
9.8.1 Login Screen........................................................ 153
9.8.2 Local Setting ........................................................ 153
9.8.3 Live....................................................................... 157
9.9 Search Mode.......................................................... 160
9.9.1 Date/Time Search ................................................ 160
9.9.2 Event Search........................................................ 161
9.9.3 POS/ATM............................................................. 162
9.10 Disconnection..................................................... 163
9.11 Uninstallation...................................................... 164
10. CMS WEB CLIENT ................................................... 166
10.6 Setup and Login ................................................. 166
10.7 Live Display........................................................ 167
10.8 Playback Screen................................................. 168
11. CMS MOBILE VIEWER............................................. 170
11.6 iPhone Mobile..................................................... 170
11.6.1 System Requirements........................................ 170
11.6.2 Installation.......................................................... 170
11.6.3 Site Registration................................................. 172
11.6.4 Connection......................................................... 173
11.6.5 Search................................................................ 174
11.6.6 PTZ Control........................................................ 176
11.6.7 Information......................................................... 177
11.6.8 Disconnection..................................................... 177
11.6.9 Uninstallation...................................................... 177
11.7 Android Phone.................................................... 179
11.7.1 System Requirements........................................ 179
11.7.2 Installation.......................................................... 179
11.7.3 Site Registration................................................. 180
11.7.4 Connection......................................................... 181
11.7.5 Search................................................................ 182
11.7.6 Audio.................................................................. 182
11.7.7 PTZ control......................................................... 183
11.7.8 Information ......................................................... 183
11.7.9 Disconnection..................................................... 184
11.7.10 Uninstallation.................................................... 184
11.8 Blackberry Mobile............................................... 185
11.8.1 System Requirements........................................ 185
11.8.2 Installation.......................................................... 185
11.8.3 Site Registration................................................. 185
11.8.4 Connection......................................................... 186
11.8.5 PTZ Control........................................................ 187
11.8.6 Disconnection..................................................... 187
11.8.7 Uninstallation...................................................... 188
12. KEYBOARD CONTROLLER .................................... 190
12.6 Connection..........................................................190
12.6.1 Configuration Diagram I......................................190
12.6.2 Configuration Diagram II.....................................190
12.6.3 Configuration Diagram III....................................191
12.7 Keyboard Setup in DVR......................................191
12.8 Keyboard Configuration ......................................192
12.9 Operation............................................................192
12.9.1 DVR/PTZ Mode conversion................................192
12.9.2 DVR Control Mode..............................................192
12.9.3 PTZ Control Mode...............................................193
13. SERIAL IN (POS/ATM)..............................................195
13.6 Usage of Serial-In Function.................................195
13.7 Connection Method.............................................195
13.8 Connection Diagram ...........................................195
13.9 Link .....................................................................196
13.9.1 Link Setup...........................................................196
13.9.2 Schedule Setup ..................................................197
13.10 Setup...................................................................197
13.10.1 Title...................................................................197
13.10.2 Port Setting.......................................................197
13.10.3 OSD Display.....................................................198
13.10.4 Pattern Setting..................................................198
13.11 Search.................................................................200
14. HD-SDI VIDEO SIGNAL ACCESSORIES .................203
14.6 HSC1100 ............................................................203
14.6.1 Introduction.........................................................203
14.6.2 Features..............................................................203
14.6.3 Technical Specification.......................................203
14.6.4 Unpacking...........................................................203
14.6.5 Service................................................................203
14.6.6 System Dimension Diagram ...............................204
14.6.7 System Connection Diagram ..............................204
14.6.8 Cable ..................................................................204
14.6.9 Display................................................................205
14.7 HSC1200 ............................................................205
14.7.1 Introduction.........................................................205
14.7.2 Features..............................................................205
14.7.3 Technical Specification.......................................205
14.7.4 Unpacking...........................................................205
14.7.5 Service................................................................206
14.7.6 System Dimension Diagram ...............................206
14.7.7 Connector Wiring................................................206
14.7.8 Cable ..................................................................206
14.7.9 Operation Key and Screen Display Information..207

11
14.8 HSR1110............................................................ 207
14.8.1 Introduction ........................................................ 207
14.8.2 Features............................................................. 207
14.8.3 Technical Specification....................................... 208
14.8.4 Unpacking .......................................................... 208
14.8.5 Service............................................................... 208
14.8.6 System Dimension Diagram............................... 208
14.8.7 Connector Wiring................................................ 208
14.8.8 Cable.................................................................. 209
14.8.9 Display ............................................................... 209
14.9 HSR1440............................................................ 209
14.9.1 Introduction ........................................................ 209
14.9.2 Features............................................................. 209
14.9.3 Technical Specification....................................... 209
14.9.4 Unpacking .......................................................... 210
14.9.5 Service............................................................... 210
14.9.6 System Dimension Diagram............................... 210
14.9.7 Connector Wiring................................................ 210
14.9.8 Cable.................................................................. 210
14.9.9 Display ............................................................... 211
14.10 HQS1004............................................................ 211
14.10.1 Introduction ...................................................... 211
14.10.2 Features........................................................... 211
14.10.3 Technical Specification..................................... 211
14.10.4 Unpacking........................................................ 211
14.10.5 Service............................................................. 212
14.10.6 System Dimension Diagram............................. 212
14.10.7 Connector Wiring.............................................. 212
14.10.8 Cable................................................................ 212
14.10.9 Display ............................................................. 213
14.11 HFO1100 & HFO1200........................................ 213
14.11.1 Introduction ...................................................... 213
14.11.2 Features........................................................... 213
14.11.3 Technical Specification..................................... 213
14.11.4 Unpacking........................................................ 214
14.11.5 Service............................................................. 214
14.11.6 System Dimension Diagram............................. 214
14.11.7 Connector Wiring.............................................. 214
14.11.8 Cable................................................................ 215
14.11.9 Display ............................................................. 215

12
1. Product Features
1.1 Unpacking
This equipment is an electronic appliance, so it should be handled with special care.
After unpacking, please check if all the following items are included.
-DVR Main body
-A Type : Power Supply Adapter (DC 12V, 5A) and Power Supply Cable
-B, C(4CH) Type : Power Supply Adapter (DC 12V, 6.67A) and Power Supply Cable
-C(8,16CH), D, E and F Type : Power Supply Cable
-Remote Control With 2 AAA batteries
-Installation CD (CMS Software & User’s Manual)
1.2 Service
If there is any problem in the product, please refer servicing to a supplier or a distributor with qualified service personnel.
1.3 System Connection Diagram
A Type –4 channel Series HD-SDI DVR

13
B Type –4 channel Series HD-SDI DVR

14
C Type –4 / 8 / 16 channel Series HD-SDI DVR

15
D Type –4 / 8 channel Series HD-SDI DVR

16
E Type –4 channel Series HD-SDI DVR

17
F Type–16 channel Series Hybrid DVR

18
2. Installation
2.1 Hard disk and DVD-RW Installation
2.1.1 SATA Port
A Type
-Main substrate of this DVR has one SATA port: it is indicated as SATA 1.
-Only one SATA device (hard disk) is possible to connect in Serial to the SATA port.
B Type
-Main substrate of this DVR has three SATA ports: they are indicated as SATA 1, 2 and SATA 3.
-Please mount DVD-RW at the SATA 3 port.
C (4CH) Type
-Main substrate of this DVR has four SATA ports: they are indicated as SATA 1, 2, 3 and SATA 4.
-Please mount DVD-RW at the SATA 4 port.
C (8/16CH) Type
-Main substrate of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5.
-Please mount DVD-RW at the SATA 5 port.
D, E and F Type
-Main substrate of this DVR has five SATA ports: they are indicated as SATA 1, 2, 3, 4 and SATA 5.
-Please mount DVD-RW at the SATA 4 port.
Up to five SATA devices (hard disk and DVD-RW) are able to be connected to the SATA ports in serial, however the devices
must be connected onto correct SATA port.
Refer to the table below to mount hard disks and DVD-RW.
A Type
4 / 8 / 16 CH DVR
Storage
SATA 1, 2 Port
HDD
1
1
HDD
B Type
4 / 8 / 16 CH DVR
Storage
SATA 1, 2 Port
SATA 3 Port
HDD
DVD-RW
1
2
3
1
1
HDD
---
DVD-RW
2
1
HDD
HDD
DVD-RW
2
0
HDD
HDD
---
C (4CH) Type
4 / 8 / 16 CH DVR
Storage
SATA 1, 2 Port
SATA 3, 4 Port
HDD
DVD-RW
1
2
3
4
1
1
HDD
---
---
DVD-RW
2
1
HDD
HDD
---
DVD-RW
3
1
HDD
HDD
HDD
DVD-RW
4
0
HDD
HDD
HDD
HDD
C (8/16CH) Type
4 / 8 / 16 CH DVR
Storage
SATA 1, 2 Port
SATA 3, 4 Port
SATA 5
Port
HDD
DVD-RW
1
2
3
4
5
1
1
HDD
---
---
---
DVD-RW
2
1
HDD
HDD
---
---
DVD-RW
3
1
HDD
HDD
HDD
---
DVD-RW
4
1
HDD
HDD
HDD
HDD
DVD-RW
4
0
HDD
HDD
HDD
HDD
---

19
D, E and F Type
4 / 8 / 16 CH DVR
Storage
SATA 1, 2 Port
SATA 3, 4 Port
SATA 5
Port
HDD
DVD-RW
1
2
3
4
5
1
1
HDD
---
---
DVD-RW
---
2
1
HDD
HDD
---
DVD-RW
---
3
1
HDD
HDD
HDD
DVD-RW
---
4
1
HDD
HDD
HDD
DVD-RW
HDD
4
0
HDD
HDD
HDD
HDD
---
2.1.2 Internal SATA Storage (C / D / E and F Type)
C (8/16) type DVR has 5 internal SATA Ports.
1-4 SATA Port: It is designed to mount HDD.
5 SATA Port: Please mount DVD-RW.
D / E and F type DVRs have 5 Internal SATA Ports: The picture below shows internal ports 1-5 SATA Port.
1-3 SATA Port: It is designed to mount HDD.
4 SATA Port: Please mount DVD-RW.
5 SATA Port: It is specifically designed to mount HDD ONLY.
Only one DVD-RW can be installed among the SATA Ports.
CAUTION
Do not mount DVD-RW at SATA 5 Port (D, E and F type).
2.1.3 HDD Installation
Securely fix a hard disk by using bracket and screws provided herewith.
Please do not use any different hard disk cables (data cable and power supply cable) other than ones we provide.
Otherwise, it may cause damage to the hard disk.
CAUTION
Install hard disk after DVR power is off. Otherwise, it may cause permanent damage to the hard disk. To turn off DVR, please click ()
SETUP>SYSTEM>Shutdown. Also, wait for 5 seconds before plugging in power supply again.

20
CAUTION
For installation/addition/replacement/Removal of HDD (DVD-RW), make sure that DVR is turned off. Otherwise, it may cause permanent
damage to the HDD (DVD-RW).
Installation/Addition/Moving/Replacement: User should start ‘HDD initialization’ including formatting. Otherwise, DVR won’t recognize
the hard disk and may begin to function abnormally. Please follow the below procedure for ‘HDD initialization’.
①(Date/Time setup) Set up the current date and time (SETUP>SYSTEM>Admin>Date/Time)
②(Initialization of system setup) All values in setup are restored to factory default settings
-(SETUP>SYSTEM>Information>Status>Setup>Default)
③(HDD format) HDD format is done by SETUP>SYSTEM>Admin>Storage>Format. If there are more than two HDDs, each must be
formatted, separately. When the format is completed, DVR will auto-reboot.
Removal: Follow the Remove procedure even when a pre-installed hard disk has been removed. In
-SETUP>SYSTEM>Admin>Storage>Format, click () ‘Removed’ item under the discrete Format headings of a corresponding HDD to
discard ‘HDD’ item. When the Remove procedure is completed, DVR will auto-reboot.
2.1.4 Maximum HDD Capacity
Each model has a different HDD capacity recognition.
Below table shows the recommended maximum HDD capacity for each model.
Model
A type
B type
C type
D type
E type
F type
Capacity
3TB
16TB
16TB
16TB
16TB
16TB
2.1.5 DVD-RW installation
Securely fix DVD-RW by using bracket and screws provided herewith.
Please do not use any different DVD-RW cables (data cable and power supply cable) other than the ones we provide.
Otherwise, it may cause damage to the DVD-RW.
Only one DVD-RW can be used. Mount it at the SATA 3 port (B Type) or SATA 4 port (C (4CH), D, E and F type). For C
(8/16CH) type, users should mount it at the SATA 5 port.
CAUTION
Install DVD-RW hard disk after DVR power off. Otherwise, it may cause permanent damage to the hard disk. To turn off DVR, please click ()
SETUP>SYSTEM>Shutdown. Also, wait for 5 seconds before plugging in power supply again.
2.2 Connector Wiring
2.2.1 Video-In/Loop Out Connections
A, B and C Type
Connect cameras to ‘HD-SDI IN’to channel 1 to 16.
F Type
Connect cameras to ‘HD-SDI IN’to channel 1 and 2.
Connect cameras to ‘VIDEO IN’to channel 3 to 16.
If user wishes to link camera input to another device, please connect the camera to ‘LOOP OUT’
Assure the ‘VIDEO IN’ and ‘LOOP OUT’ connections are connected properly, not oppositely.
NOTE
Only F Type model supports LOOP OUT connection.
2.2.2 HD-SDI Camera Input Format
HD-SDI recorder shall recognize following HD-SDI signals
-720P 24, 720P 25, 720P 30, 720P 50, 720P 60, 1080I 50, 1080I 60, 1080P 24, 1080P 25, 1080P 30, 1080P 50 and 1080P 60.