Capella BP 2620 COMPACT User manual

Adjusting the Armbar
BP 2620 - COMPACT
PLEASE KEEP INSTRUCTIONS FOR FUTURE REFERENCE
Safety guidelines and instructions must always be followed before making
use of this product,
please retain these instructions for future reference.
This product complies with product standard AS/NZS 2088:2000
WARNING: TO AVOID INJURY OR DEATH:
PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS STATIONARY.
DO NOT LEAVE CHILDREN UNATTENDED.
SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU ADJUST
THE STROLLER, OTHERWISE THEY MAY BE INJURED.
USE THE HARNESS AT ALL TIMES.
WHEN NOT IN USE DISCONNECT SHOULDER STRAPS FROM THE WAIST STRAP
AND/OR BUCKLE.
The harness can form loops which may be a strangulation hazard. Never leave
a harness connected when not tted to a child in the stroller
Care should be taken if the stroller is to be used on stairs or escalators.
FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
To avoid serious injury always use the harness provided to secure the child.
(Adjust the straps to suit the body size of your child)
Care should be taken whilst folding and unfolding stroller to prevent ngers
being trapped. Ensure your child’s ngers, hands and all other body parts are
clear from any moving
part when adjusting the seat or handle on your stroller.
This stroller should not be used near an open re or an exposed ame.
It is unsafe to use accessories other than those supplied or approved by
Capella.
THE MAXIMUM WEIGHT FOR THE SEAT UNIT IS 18KG
THE MAXIMUM WEIGHT FOR THE BASKET IS 5KG
THE MAXIMUM TOTAL WEIGHT FOR THE STROLLER IS 23KG
WARNING PARTS
How to Unfold
STEP 1. Release the latch (picture 1)
STEP 2. Apply pressure to each side of the handle
Bar outwards.
STEP 3. Set release on the Handle Bar (unlock)
(picture 2)
STEP 4. Push the handle upwards as well as pushing
backwards whilst pressing the handle button
(picture 3)
WARNING
*While in use, always set the
handle in the lock position.
*Make sure the stroller is fully
latched.
*Make sure that the guide holder
is placed under the holder.
1. To Assemble - Push the arm bar
into the armrest until it clicks in.
2. To disassemble - Detach the arm
bar from the armrest whilst pressing
the release buttons at the same time.
These are located on both sides of
the armrest.
STEP 1. Squeeze
the back adjusters
STEP 2. Adjust the
backrest to the
desired position.
Adjusting the Backrest
Adjusting the Wheels
* The front swivel lock should be used
on uneven surfaces such as grass,
stone or gravel.
* Push Button down be in swivel mode..
* Raise the button up to lock the swivels.
* Turn the swivel to ensure that it is
locked or released.
How to use the Brakes
*To Apply the Brakes - Push the brake
lever downwards.
* To release the brakes - Lift the brake
lever upwards.
WARNING
* PUT ON ALL THE BRAKES WHENEVER
YOU PARK THE STROLLER.
* ALWAYS APPLY THE BRAKES WHENEVER
THE STROLLER IS STATIONARY.
Adjusting the Footrest
* The length of the Footrest can
be Adjusted by moving the
adjuster under the footrest.

How to use the Canopy
BP 2620 - COMPACT
PLEASE KEEP INSTRUCTIONS FOR FUTURE REFERENCE
* To open the Canopy - Pull it forward (1) and lock the canopy
latch (2) As shown in pictures 1 and 2.
* To Close the Canopy - Raise the canopy latch upwards (3) and
push the canopy backwards As shown in Pictures 2 and 3.
* The Canopy is detachable you can remove it by lifting it out
of the canopy hanger.
How to use the Basket
* To remove the basket,
take off the front and rear
clips on both sides.
* To attach the basket,
reverse the procedure of
removing the basket
WARNING
Do not place more
than 10lbs in the
basket. It may
Collapse
To Fold the Stroller
STEP 1. Lock the Swivel Lock
STEP 2. Set the safety Lock on the handle to Release or
Unlock.
STEP 3. Press the button on the handlebar, Whilst lifting up
the safety guard (picture 1) fold the stroller in the
forward direction until the automatic hooks lock.
(Picture 2)
Adjusting the shoulder straps
STEP 1. To Assemble - Use the buckle, connect the
shoulder strap under the seat strap. Wind the two
upper straps around the handle and insert the straps
under the seat strap as shown.
STEP 2. To Disassemble - Reverse the assemby
instructions
Care and Maintenance
ALL CAPELLA PRODUCTS HAVE ONE YEAR WARRANTY FROM THE
DATE OF PURCHASE.
IT IS RECOMMENDED TO REGULARLY INSPECT AND MAINTAIN
MOVEMENT OF LOCKING DEVICES AND SECURE OF ESSENTIAL
COMPONENTS.REGULARLY CHECK ALL PARTS FOR WEAR AND TEAR.
DO NOT USE SPRAY LUBRICANTS, SIMPLY WIPE CLEAN AFTER USE.
THE SEAT LINER CAN BE CLEANED BY SPONGING WITH WARM SOAPY
WATER AND A MILD DETERGENDISINFECTANT MAY BE USED IF
DESIRED.STUBBORN MARKS MAY BE REMOVED WITH A
NON ABRASICE CREAM CLEANER.NEVER CLEAN WITH ABRASIVE,
AMMONIA BASED, BLEACH BASED OR SPIRIT TYPE CLEANERS.
IF THE WHEELS BECOME DAMAGED OR WORN DISCONTINUE
USE AND REPLACE.
FABRIC CARE -
-HAND WASH ONLY
-DO NOT BLEACH
-DO NOT TUMBLE DRY
- DO NOT IRON-
-DO NOT WRING
- DO NOT DRY CLEAN
5-point harness
USE THIS HARNESS AT ALL TIMES
WARNING
CAREFULLY PLACE YOUR CHILD INTO THE SEAT AND BRING THE SAFETY HARNESS
AROUND THE CHILDS WAIST AND OVER THE CHILDS SHOULDERS.PLACE THE CROTCH
STRAP BETWEEN YOUR CHILDS LEGS. TIGHTEN THE HARNESS TO BE SNUG AROUND
THE CHILDS WAIST AND OVER ITS SHOULDERS. (Picture 1)
ATTACH EACH OF THE SHOULDER STRAPS TO THE CROTCH STRAP BUCKLE WITH EACH
END.REPEAT THIS FOR BOTH SHOULDER STRAPS.ONCE EACH SHOULDER STRAP IS
ATTACHED ON THE WAIST BUCKLE INSERT THE WAIST STRAP END TO THE BUCKLE.
REPEAT FOR BOTH SIDES.THEY SHOULD SNAP IN. (PULL ON THEM TO TEST)
TO RELEASE THE HARNESS SQUEEZE THE CENTRE OF THE BUCKLES FOR BOTH WAIST
STRAP ENDS. (Button A in Picture 2)