WELCOME TO THE CAPRESSO H2O CORDLESS KETTLE
The Capresso water kettle boils water faster, safer and more energy efficiently than
your stovetop. Water heats instantly. When it comes to a boil, it shuts itself off. The
Capresso water kettle is easy to operate. The extra large lid opening and the
concealed heating element make it very easy to fill and clean. The universal power
base is ideal for left or right hand use. The unique neon-red illuminated water level
indicator adds style and practicality. Whenever the kettle shuts off, the red light turns
off. The 18/10 high polished stainless steel design with the elegant chrome-plated
safety switch fits well in every kitchen environment.
CUSTOMER SERVICE
Should you require further information or if particular problems occur that are not
covered in this manual, please call our toll free HELP LINE: 1-800-767-3554 from
9AM to 9PM Monday through Friday and from 9AM to 5PM Saturday Eastern
Standard Time. If you call at any other time, please leave a message with your
telephone number and when we can call you back. You can also send us a fax at:
PLEASE DON'T!
• Never boil water while the lid is open. The kettle will not shut off and boiling
water may splash out of the kettle. This can cause severe injuries.
• Never fill kettle with anything but water.
• Do not add instant soups or any other soluble to the kettle. Particles can enter
the water level indicator and make it inoperable.
• Do not use the kettle to thaw food of any kind.
• Do not use the kettle to make sauces or to melt cheese, butter or any other items.
BEFORE USING FOR THE FIRST TIME
Read all Important Safeguards and Operating Instructions before using the H2O.
Discard the first filling of boiling water to remove any dust and residues from the
manufacturing process.
BOILING WATER
1. Remove kettle from base.
2. Open the lid by pushing the lid button.
3. Fill with the desired amount of fresh cold water. The kettle has outside markings
in cups and ounces.
4. Close lid.
CAUTION / DANGEROUS: never fill above the MAX line of the outside water
level indicator. There is also a MAX line and the word MAX engraved on the
inside of the kettle. If you fill above the MAX line, boiling water will push out of the
pouring spout. This can cause severe injuries and burns.
5. Place kettle on Power Base.
6. Plug cord into wall outlet.
7. Gently push the On switch down. The Water Level Indicator will be illuminated
and the kettle begins to heat the water.
8. When the water has boiled, the kettle will turn off automatically, the switch will
jump up and the light will shut off.
9. Lift kettle from base and pour water out slowly.
10. Replace kettle.
11. To bring the remaining water to a boil again, gently push the On switch down.