Capterra Casual CX10 User manual

CX10 - FLAT BACK ADIRONDACK
ASSEMBLY INSTRUCTIONS
IMPORTANT: Please read this manual carefully
before beginning assembly of this product.
Keep this manual for future reference. Visit
our website for an assembly instruction video.
*Made from 95% post-consumer recycled plastic bottle caps
www.capterracasual.com
[e-mail]
Toll-free: 1-866-439-9521

PART LIST
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
A
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
B
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
C
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
D
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
E
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
F
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
G
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
H
1-1/2” (38 mm) screw x 14
Shown at actual size
#12-24 2” (50.8 mm)
flat head bolt x 6
Shown at actual size
I#12-24 7/16” (11.1 mm)
serrated nut x 6
Shown at actual size
Needed for assembly:
ASSEMBLY PREPARATION
IMPORTANT: Please read and understand the manual before any assembly. Before
beginning assembly of product, make sure all parts are present. Compare parts with
packaging contents list. If any part is missing, or if you have any questions, contact our
service center. Remove all parts from the box in the cleared area and position them on the
floor in front of you. Do not dispose of the packing materials until assembly is complete.
2

A S S E M B LY
Step 1
Requires B - SEAT, C - LEFT LEG, D - RIGHT LEG, H, I.
Attach piece Dto seat Bwith bolt Hand nut I. Tighten bolt 95%, then fully tighten at
step 7. Make sure the edge of Dis flush with B. Repeat for other side with piece C.
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
Shown at actual size
H I
(x2) (x2)
REPEAT FOR OTHER SIDE WITH PIECE C.
3
FLUSH
FACES OUT
H
I
B
B
D
D
I
H

Step 2
Requires A - BACK, G.
Place assembled seat of chair on box for ease of assembly. Attach piece Ato piece B
using Gscrews, lining up with front pre-drilled holes.
Shown at actual size
G
(x4)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
Step 3
Requires G.
Attach piece Ato piece C and D using Gscrews.
Shown at actual size
G
(x4)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
4
G
G
A
D
GG
A
C
A S S E M B LY

Step 4
Requires E - LEFT ARM, F - RIGHT ARM, H, I.
Attach piece Eto piece B with bolts Hand nuts I. Repeat for other side with piece F.
Step 5
Requires G.
Attach pieces Eand F to piece A using Gscrews.
Shown at actual size
G
(x4)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
Shown at actual size
H I
(x4) (x4)
REPEAT FOR OTHER SIDE WITH PIECE F.
5
B
H
I
E
OUTSIDE VIEW
INSIDE VIEW
A
F
FLUSH
G
G
A
EF
A S S E M B LY

Step 7
Make sure that the nuts and bolts are all properly tightened on both sides.
Shown at actual size
G
(x2)
1 1/2" (38mm) SCREW
G
B
A
C
H
I
E
D
F
6x
6x
14x
PARTS
REPEAT FOR OTHER SIDE WITH PIECE C.
B
G
DC
Step 6
Requires G.
Secure piece D to piece B using Gscrew. Make sure edge of D is flush with B.
Repeat for other side with piece C, making sure edge of C is flush with B.
6
A S S E M B LY

WARRANTY
This Capterra Casual product carries a ten (10) year warranty against defects in
workmanship. See Capterra Casual Full Warranty Guide for more details. This product
is not guaranteed against wear or breakage due to misuse and/or abuse.
7
WARRANTY
MAINTENANCE
Clean with soapy water and sponge. Do not pressure wash.
MAINTENANCETECHNICAL DATA
Dimensions (L x W x H) 89 x 79 x 102
Product weight 22 kg
35” x 31” x 40”
48 lb
TECHNICAL DATA
Made in Canada with domestic and imported materials.
CAUTION: DO NOT EXCEED MAXIMUM WEIGHT CAPACITY OF 300 LB (126 KG).
FEB-10-2020