Car-Interface.com CI-VL7-SY3 User manual

www.car-interface.com
Installation Manual
Model No.: CI-VL7-SY3
Camera Interface
Version: 2.1

www.car-interface.com
2 / 8
Precautions
 The 'Power/CAN Cable' should always be connected last and be disconnected first.
 The vehicle should be powered off before installing this camera interface.
 You should check the names and colors of each wire exactly before you connect the wires.

3 / 8
www.car-interface.com
1. Specification
Function
IPAS + 2 Video in
1. Support rear view camera in, auto triggered by reverse gear
2. Support front view camera in, auto switch after exit from reverse gear,
display for 10s
3. Press ‘OK’ button to switchto DVR
Compatible System
FORD SYNC 3 version 2.0, 2.3, 3.0
Compatible Car Model
Fiesta, Ecosport, Edge, Focus, Mondeo, KUGA MAX (Hybrid),
KUGA(GAS), Taurus, Mustang, F150, etc.
Compatible Screen Size
6.5", 7", 8"
Compatible Year
2016-2018

4 / 8
www.car-interface.com
2. Components

5 / 8
www.car-interface.com
3. DIP Switch Setting
No.1
No.2
No.3
No.4
Selection of Car Model
OFF (▲)
OFF (▲)
OFF (▲)
OFF (▲)
EDGE, MONDEO
ON (▼)
OFF (▲)
OFF (▲)
OFF (▲)
KUGA, FOCUS
ON (▼)
OFF (▲)
ON (▼)
OFF (▲)
ECOSPORT, FIESTA
No.5
No.6
No.7
No.8
Selection of Function
OFF (▲)
OFF (▲)
OFF (▲)
OFF (▲)
Add-on rear camera, Guide line
OFF (▲)
OFF (▲)
ON (▼)
OFF (▲)
Add-on rear/front camera, Guide line

6 / 8
www.car-interface.com
4. Installation Diagram

7 / 8
www.car-interface.com
5. Remark
For some new models of FIESTA, TRANSIT AND ECOSPORT, the SYNC box is behind the
dashboard instead of the radio monitor.

8 / 8
www.car-interface.com
Copyright ©Car-Interface.com. All Rights Reserved.