8
CALIBRATING THE TO CHSCREEN - FOR IOS DEVICES
1. Ensure the touchscreen you are planning to setup has passed the "TO CHSCREEN TEST MODE",
and make sure you have the latest firmware installed. See section XX
2. Mirror your iOS device to the external display via cable/WIFI. You will need a cable, dongle or
video interface box to do this.
3. Search and install the "MimicsX2 Driver" in Cydia on your Jail broken iOS device.
4. Reboot your iOS device by pressing and holding the power button.
5. Depending on the Jailbreak you might need to re-activate it after a reboot.
6. Open up the Bluetooth settings screen and make sure any previous connections the Mimics are
removed!
7. Make sure the Bluetooth dongle and touchscreen are plugged into the MimicsG4.
8. Power on the Mimics.
9. Press the CAP button repeatedly (the RED light will turn on at each press) until you see the BL E
light start flashing. The Mimics will now reboot.
10. The RED/BL E lights will now be flashing left to right once per second. (Bluetooth Discovery
mode)
11. After a few moments you should see 'MimicsG4' appear in the Bluetooth list, so proceed to click
on it. Mimics will now start to connect.
12. Once connected, the iOS device will return to the HOME screen.
13. Open the Mimics app previously downloaded from Cydia.
14. You will be presented with the following screen.
continued...
If you see this icon
press it to 'un-pair'
the MimicsX2 Press here to
'forget' or 'un-pair'
MimicsX2 is
now 'un-paired'
