Cardoria WIFI-D8ZM User manual
User Manual User Manual
1
2
Time setNework setingsRecordSys initializeAbout“#” Fngerpint needs to be entered "four times" Enter the password and press#”“ to confirmEnter fingerprint, password, cardNote:One：Two key：Two user： Requires a fingerprint,password or card requires 2 people's fingerprint, password or card 2 different user
Setting the time is a key step in using the App dyramic password.pleasebe sure to synchronize time your mobile phone.
Check the door opening record by"2" and "8" Can query latest 200 records.After the system initialized,it is disabled by defauilt.Please select Allow, then click Reset network to start networking.
use of “user 001”arbitrary "fingerprint", "password", "card" to open the door.Press" 2 ", then press " 8"
Any ’fingerprint', "password‘ and "card" unlock can relieve opening stadus
1
6.1 Touch button area1、Touch the key area, and the keyboard light is on;2、Press [0+#] and voice prompt: "System setting please authorize.
(Default management password“0123456789”)(User 001 is the administrator, the administrator information can be changed, but cannot be deleted.)
Press “#”to confirm ; Initialization Data Succeed.
Tip: the factory default "experience mode", any fingerprint/password/card can be opened, please add administrator information ASAP.
10:00
2019-01-01
WelcomeHow to set up Smart Locksystem initializationHow to enter management modeMenu indexMain menuUser manageUser listUser listManagementTime setVoice setOpening stadusNetwork settingsRecord 001AuthorityKidUser 002User 001[+]Add userPlease prepare password fingerprint or cardAdd userPassword managementEnter password management,Password or add fingerprintpassword.Press "#" to confirm :Permission savedPress "#’ to confirm : Set successfullypress "#" to confirm : set successfullyPress ’#‘ to confirm : set successfullyChange permissionsdelete usersUser 001 (administrator)KidOne key/Two key/Two usertouch toneRemote password：User:001 fingerprint 001successful set upDate: 2017-02-15Time: 13:55:02allow disallowRemote unlock：allow disallowUnlock notification：Reset networkallow disallowturn of fturn onBeepturn of f VolumeLow Medium Highturn onStarting time 2017-02-01End time 2017-03-01valid time period 1:00:00-00:00valid time period 2:00:00-00:00Cydle period: Monday, Tuesday.Wednesday, Thursday,friday,saturday,sundayGuestBabysitterHourly worker TempoaryUser 002 (host)User 003 (host)AuthoritySecurityVoice set
User Manual User Manual
3
4
Note01、Touch the button area, the keyboard light on.2、Press [0+#],voice prompt: System setting please authorize" to enter the Administrator fingerprint/password or card, press "#" to confirm.3、Select User Management and press "#", select "Add User" and press "#" to confirm; enter the new fingerprint/password or card to be added.Enter a password of at least 6 digits. Do not enter a consecutive password, such as: 123456.Add userAdd a user fingerprint/password or cardNote1、Touch the button area, the keyboard light on.2、Press [0+#], voice prompt "system setting please authorize" to enter the management fingerprint/password or card, press "#" to confirm.0
0
*3、Select " User Manage" and press"# ", press "8" to select "User01" (Admin) "" to "Key management "and press "# "，select "Add " and press "# "to enter the fingerprint/password or card.Must keep one administrator fingerprint/password or card.Add administrator4、All fingerprints/passwords or cards in the "User001(Admin)" menuare all administrators.3、Select User Manage and press "#", press "8" to select "User" and press "#" to confirm; select "Key Management" and press"#" . Then press "8" to select the "change key"/"delete key"and press "#" to confirm.Note01、Touch the button area and the keyboard light on.2、Press [0+#], voice prompt "System setting authorize" to enter theadministrator fingerprint/ password or card, press "#" to confirm.User 001 as the administrator, fingerprint/password or card must keep one, can not delete all.Modify/delete userModify/delete user fingerprint/password or cardNote1、Touch the button area and the keyboard light on.2、Press [0+#], voice prompt "system setting please authorized" Enter the administrator fingerprint/password or card, press"#" to confirm.03、Press "8" to select "Time Setting" and press "#"use "2. 4.6. 8" to set the time. After the setting is completed, press "#"to confirm.Please keep the same time with the mobile phone when setting the time. Please open the door with the administrator password after the setting is completed.设置时间
0
Time set(default password "0123456789")0
*
0
*
0
*
User Manual User Manual
Note1、Touch the button area and the keyboard will light on.2、Press [0+#], voice prompt "system setting please authorize" to enter the administrato fingerprint/password or card.press "#" to confirm.03、Press "8" to select "Security" and press "#".One key -any fingerprint/password or card can be openedTwo key -two fingerprints/passwords or cards are required to open the door.Two user- require two different users' fingerprints/passwords or cards to open the door.Administrators are not limited by this mode and can open the door directly.Unlock mode settingNote1、Touch the button area and the keyboard will light on.2、Press [0+#], voice prompt "System setting please".authorize", enter the administrator fingerprint/password or card, press“#” to confirm.03、Press "8" to select "Authority" and press "#".Administrators are not limited by this mode and can open the door directly.AuthorityKidGuestBaby sisterCan set the specified time period to Open the doorHourly worker temporaryNote1、Touch the button area and the keyboard will light on.2、Press[0+#], voice prompt "System setting please authorize", enterthe administrator fingerprint/password or card, press "#"to confirm.03、Press "8" to select "Record " and press "#".Doors open records only saves 200, automatically overwrite when the storage is full.Record Voice set1、Touch the button area and the keyboard will light on.2、Press [0+#], voice prompt "System setting please authorize", enter the management fingerprint password or card, press "#" to confirm.03、Press "8" to select "Voice set", press "#" , press "4" to decrease, press "6" to increase.1、remove all the batteries, wait 5 seconds, install the batteries.2、language selection will display on LED screen.3、Press "1" to select Chinese, press "2" to select English.language settings1.Chinese 2.English
5
6
0
*
0
*
0
*
0
*
User Manual User Manual
7
8
Set opening stadus:Opening stadus1.Chinese 2.EnglishUse any one of the administrator fingerprint/password or card to open the door. Press the "2" and "8" keys when the keyboardlighton.If the battery is out of power and the door lock does not work properly, you can connect the power bank by Micro-USB 5V .into charging line connect the into the emergenly powerinterface under the outer panel and unlock it in the nomalway.Relieve opening stadus:Use any one of the administrator fingerprint/password or card to open the door and relieve it.1. Remove the battery cover.2. Press and hold the· reset button , and the voice prompt “Initialization finished”indicating that the lock has been initialized successfully.If you accidentally forget the password, you can remove the back panel battery coverand initialize the system with power on.Steps as follows：Note
设 时间
NoteEmergency power supply methodResetReset buttonEmergency power interface(in the button)When the battery power is lower than 4.6V, after the system successfully unlocks the lock each time, the system will have a voice prompt: "low power, please replace the battery". At this time, please timely replace the battery.(please do not mix old and new batteries with different models.)After the reset, all previously setted fingerprints/passwordscards will be cleared.
User Manual User Manual
9 10
Wi-Fi Smart Network Lock APP InstructionsSoftware name:Tuya SmartTwo: Wi-Fi intelligent network door lock function introductionThree：Distribution network setting1.Smart lock system menu operation1+2、Mobile phone distribution network operationFull link communication encryptionOffline door opening recordTime synchronizationOpening event linkageBattery status displayOther event linkageApp remotely open the doordynamic passwordTemporary password managementOTADoorbell callOpening recordNotificationUser ManagementApp-server-wifi module, all communication links are encrypted, eliminating communication security risksUnlock mode + unlock code + time, the user can query the opening record of the past 12 months thouch the app, no data loss, support fingerprint + password combination to open the door.After re-networking, the module will pess the opening record that occumed during the offline phase to the cloud.The switch room is consistent with the server when the door is locked, supoorting global time zone + winter and summer time switch.The Tuya wifi module integrates a dynamic cryptographic algorithm. The manufacturer implements this function for 1 hour, and can dynamically copy dynamic passwords on the app.Supports up to 10 sets of temporary passwords, supports creation and deletion, automatic copy after temporary password creation, can be pasted on WeChat, SMS. Temporary password SMS supports overseas mobile phone number, you can choose different country codemically copy dynamic passwords on the app.Low bettery alarm, password error, fingerprint error. room card error, etc.Add users via manually associated with unlock id via app.Linkage through app automation configuration.Electricity value or state of charge.Customize linkage based on different unlock ids or types.Module and MCU can be OTA.The app receives a notification after the hardware makes a doorbell call request.After the door lock request,the app Notificated and can confirm to open the door or caneel to open the door.FeaturesExplanatonMenu indexMain menuUser ManageAuthorityTime setVoice setRecord Sys initializeAboutSecurity
Network settings
Network settingsNetwork settingsNetwork settingsNetwork settingsDeleting networkConnecting to the networkWaiting for the phone to add devicesClick Reset NetworkOpen APP Click to Add DeviceChoice: Security SensorSelect the door lock (Wi-Fi)Choice: NetworkEnter: network passwordWaiting for network configurationAdd device successfullyIf the device connection is not successful Reselect compatibility mode distribution networkEnter the APP operation interfaceClick the confirmation buttondoor
User Manual User Manual
11 12
3、APP mobile phone function introductionDynamic password1. The homepage includes remote opening, message, member management, door opening record, temporary password and other functions.2. Remote unlock should send the request from hardware of lock.Press doorbell then the "Click open remotely" will show on the App.You can choose "Cancel" or "Confirm"Click Get to get the dynamic password. After you get it, you can quickly copy the password text.
User Manual User Manual
13 14
3、APP Function InstructionNotice centerMember ManagementUnlock recordedNotice center include alarm notice、dialing notice and wrong unlock information recorded.You can add and delete member to manage your lock,but only the administrator have the authority.All unlocked record will be recorded in inverted.If the unlock user have connected will show it connected name,but if not connected will show it real name.
User Manual User Manual
15 16
3、APP Function IntroductionTemporary CodeRestore factory setting1、Through the App you can add and delete the temporary code and every times’ operation you must operate on the lock in the same time.2、You can choose if send text by mobile or not.(Now,APP support domestic and international text)1、Click upright corner of main interface into meau,downward find the “Restorefactory setting”button ,then click.2、You also can back to factory setting from the hardware,details please reference the operate instruction.Main door
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Table of contents
