CareCo Aqua BA05051 User manual

Product Code:
BA05051
USER MANUAL
CLEANING/MAINTENANCE TECHNICAL DATA
• Clean regularly by hand with a
damp cloth and usual household
cleaning agents!
• Use spraying disinfectants p.e.
Descosept AF or Bacillol AF
• Do not use any aggressive
detergents!
Dimensions
Overall width 62 / 58 cm
Overall length 55 / 50 cm
Width of seat 43 cm
Depth of seat 44 cm
Height of seat 52 – 64 cm
Height of backrest 36 cm
Weight
Total with footrests 8.5kg
Maximum User
Max. Loads 130kg
Material
Frame: Welded steel tube,
powder coated. Toilette seat,
Seat plate and backrest: Wood
with foam and re retardant
PVC cover, welded. Bucket with
lid: ABS
WARRANTY
We issue a warranty of 12 months
from date of purchase.
Subject to technical alterations.
Errors and omissions excepted
CareCo UK Limited
Hubert Road
Brentwood
Essex, CM14 4JE

FOREWORD
Dear users, these instructions
serves you and the care staff as an
action basis for sure, safe use of
the commode chair and a sensible
use of the product possibilities. The
instructions describes the preparation,
service, use, servicing and care of the
product. This instructions is to be
perused carefully and must be always
accessible to all users of the product.
INDICATION
Commode chairs are necessary
when using or achievement of the
toilet is not possible on account of
the impediment. Commode chairs
are also usable as room chairs. The
Commode chair can be put also over
the toilet, remove the seat plate and
the bucket before.
INCLUDED
• Commode pre-assembled
• Bucket with lid
• Operating instructions
PARTS
1. Backrest
2. Seat plate removable
3. Toilet seat
4. Armrest
5. Standard bucket with lid
6. Adjustable legs
7. Fixation clips
SAFETY INSTRUCTIONS
• Read these instructions carefully.
• Before using, all components are to
be checked for damages.
• The steadiness of the toilet chair is
relatively high, nevertheless avoid
lateral lean out – tilting danger !
• Protect from unauthorized use, e.g.,
by children.
REAPPLICATION
This product is suitable for the
Reapplication. With the processing
the standards of the manufacturer
must be considered. This standards
are made available on inquiry.
LEGS ASSEMBLY
The commode chair is pre-assembled.
Insert the legs as shown in the picture
in your preferred height (from
520 - 640 mm in steps with 20 mm),
then click in the xation clip as
illustrated.
REPLACING OF
TOILETTE SEAT
The Toilette seat is clipped in and
can be released with suitable
strength upwards
INFORMATION FOR USE
The toilet chair can be used as a normal
chair. For the use as a commode chair
remove the seat plate.