Carlon SSMR Series User manual

NSF / ANSI 372
When you need a No-Lead Water Meter with a Digital Remote, the SSMR®
series is just the one. The result is an accurate, compact, and reliable remote
system. The remote display matches the amount shown on the meter register.
This Multi-Jet Meter has long life and good tolerance to contaminants.
The SSMR®meter is available in sizes from ⅝” x ½" to 2”with maximum flow
rates up to 160 GPM and pressures up to 150 psi. Registrations are available
in gallons, cubic feet, or liters/cubic meters.
The SSMR®meter is tested and certified to NSF/ANSI 372 for lead free
compliance and meets or exceeds AWWA specifications.
SSMR®SERIES METERS
1710 EATON DRIVE • GRAND HAVEN, MICHIGAN 49417
PHONE [phone] • FAX [phone]
E-MAIL [e-mail] •WEBSITE WWW.CARLONMETER.COM

METER / PIPE
SIZE
MODEL
*CONTINUOUS
FLOW
FLOW
RANGE
WEIGHT
LENGTH
HEIGHT
WIDTH
CONNECTION
LENGTH (X2)
⅝” X ½"
625SSMR
8 GPM
¼- 20 GPM
3.3 lbs.
7 ½”
4 ¼”
3 ⅝”
2”
⅝” X ¾"
6251SSMR
10 GPM
¼- 20 GPM
3.3 lbs.
7 ½”
4 ¼”
3 ⅝”
2”
¾" X ¾"
750SSMR
15 GPM
½ - 30 GPM
3.4 lbs.
7 ½”
4 ⅝”
3 ⅞”
2”
1"
1000SSMR
25 GPM
¾- 50 GPM
5.7 lbs.
10 ¼”
4 ⅝”
3 ⅞”
2 ¼”
1½"
150SSMR
50 GPM
2 - 100 GPM
10.6 lbs.
11 ⅞”
5 ½”
4 ⅞”
2 ½”
2"
200SSMR
80 GPM
2 - 160 GPM
13 lbs.
11 ⅞”
5 ½”
4 ⅞”
2 ¾”
Pressure Rating: Maximum 150 psi.
Temperature Range: 35° - 122°F. Protect the meter from freezing.
PH Level Range: 6.5 –8.0
Accuracy: +/- 1.5% of maximum flow when operating between minimum and
maximum flow range.
Register Options: U.S. Gallons, Cubic Feet and Liters.
Remote Counter Housing: NEMA-4 (UV protected stabilized ABS plastic)
Remote Counter Dimensions: Height 4¾”, Width 3”, Depth 1”
Remote Counter Display: UV Protected Liquid Crystal, 8 digit, .315” high
Remote Input: Reed Switch or Capacity Discharge Generated Pulses.
SSMR®METER SPECIFICATIONS
METER SELECTION CHART
A31UR UNIVERSAL
REMOTE COUNTER
Installation Instructions:
1. Flush the line thoroughly after all plumbing changes to prevent contaminates from entering the meter.
2. Install horizontally with the register facing up and inlet port facing the water supply line.
3. For outdoor installation, protect meter and the remote from direct exposure to the elements.
4. Protect meter from backflow of water opposite of indicted flow direction.
Helpful Hints:
1. All values used in a water line need to be operated slowly, and all electrically actuated valves should be slow
closing. This will help eliminate possible meter damage from water hammer in your system. Carlon offers an
excellent slow closing valve (SCV).
2. Install a strainer upstream of your water meter to protect the meter and any other in-line process equipment
from becoming jammed by particulate matter.
Warranty: Carlon Meter, Inc. warrants its products to be free of defect in material or workmanship for a period of twelve months
from the date of purchase. Contact us to obtain a copy of our complete statement of warranty.
Visit us online at www.carlonmeter.com for additional information
ORDERING INFORMATION: Select the meter model number from the Meter Selection Chart above.
Add a Gfor Gallon reading or a Cfor Cubic Feet reading or an Lfor Liters reading.
Example: 1½" Meter with Cubic Feet register = 150SSMR-C.
*Continuous Flow: The size of meter selected should be based upon continuous flow, GPM, as opposed to pipe size.
For example, if it is determined that continuous flow is 25 GPM, a 1“ meter should be selected rather than a ¾“meter.
09/17