Carmanah MX Series Parts list manual

MX Series
MX 100 SOLAR PANEL REPLACEMENT GUIDE
LEVEL 4
1
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
1. Disconnect solar connector and then battery connector(s).
90831REVA

2
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
MX 100 SOLAR PANEL REPLACEMENT GUIDE
LEVEL 4
2. Drill out four rivets securing solar panel assembly to MX 100 chassis, using a 0.161" drill bit.
3. Ensure all rivets have been cleared from mounting holes and all metal debris has been removed from MX
100 chassis.
4. Fit replacement MX 100 solar panel assembly in the same manner using included rivets.
5. Ensure rivets protrude completely through MX 100 chassis before riveting.
6. Ensure housing flange is between lid flange and hinge.
Check MX Field App to ensure solar panel is producing suitable voltage.
7. Reconnect battery connector(s).
8. Ensure you have enough slack with solar harness and reconnect to circuit board.
9. Close, latch and lock MX 100.
Ensure housing flange is between hinge leaf and lid flange before riveting.