Carmelli NG2325B User manual

BOUNCEBACK 9' TABLE TENNIS
ASSEMBLY INSTRUCTIONS
NG2325B

THANK YOU!
Thank you for purchasing this product.
We work around the clock and around the globe to ensure that our products
maintain the highest possible quality. However, in the rare instance that your
product is defective or missing parts, contact your retailer, or call 800-759-0977,
to submit parts requests or warranty claims. Please read the warranty
information at the back of these assembly instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS IN
ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
2

ADDITIONAL EQUIPMENT REQUIRED:
3
Please see Parts List at end of manual for part number when ordering parts. For replacement parts please call 800-759-0977.
PARTS IDENTIFIER (NOT TO SCALE)

ASSEMBLY TIPS
4
1. Find a clean, level surface to begin the assembly of your game table. The table will be
partially assembled upside down and then turned over onto its legs. This is a heavy game
and turning it over will require at least two strong adults.
2. Remove all of the contents from box and verify that you have all of the parts shown on
Note: Some parts may be pre-installed
or pre-assembled.
understand the text before beginning each assembly step.
4. When installing parts that have more than one screw or bolt, hand tighten all
5. Electric screwdrivers may be helpful during assembly; however, please set a low torque
and use extreme caution because screws may be stripped or overtightened, resulting in
damaged parts, if the electric screwdriver’s torque is set too high.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETYINSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS TABLE CONTAINS SMALL BALLS AND PARTS
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.

ASSEMBLY INSTRUCTIONS
5
1. Unfold the outer (player end) pre-assembled leg to a straight upright position.
2. Attach the INNER (center end) LEG, #19, to the backside of the TABLE SURFACE, #1 and #2, with METAL
BRACKETS, #8, using SCREWS, #5, in pre-drilled holes. Note: The Metal Bracket’s slot opening needs to point in the
same direction as the other leg assembly (toward center end) with both Leg Pins in slots.
3. Attach the LINKAGE TUBE, #6, and TUBE WITH STOP BRACKET, #14, to the legs with BOLTS, #10, WASHERS, #7,
BUSHINGS, #9, and NUTS, #12, as shown below. Note: The ends of the Linkage Tube and Tube with Stop Bracket that
attach to the outer (player end) pre-assembled leg are assembled on the inside of the legs. The other ends, that attach to
the inner (center end) leg are assembled on the outside of the legs.Also note, the position of the Stop Bracket is on the
outer (player end) pre-assembled leg, pointing toward side.
Note: Position of
Stop Bracket
Tip: The extra hole on the Inner Leg, #19, is used for
installing the safety locks in a later step. Position one to
the left and one to the right on #1 and #2, so locks will
be on the same side when Table Surfaces are flipped.
Note: Slot position

4. Thread LOCKING CASTERS, #11 onto the INNER LEG, #19, as shown. Attach the PLASTIC PLATE WITH STEEL
FRAME, #3, to the INNER LEG, #19, with BOLTS, #13, and WASHERS, #7.
5. Carefully turn the two table surfaces over and attach the PLASTIC PLATE WITH STEEL FRAME, #3, to the opposite
table leg, as shown, with BOLTS, #13, and WASHERS, #7.
#7
#7
#19
ASSEMBLY INSTRUCTIONS (CONT.)
6

6. Attach the SAFETY LOCKS, #4 to the INNER LEGS, #19, with BOLTS, #10, WASHERS, #7, BUSHINGS, #9, and
NUTS, #12, as shown below. Note: The Bushing will be positioned between the Safety Lock and the Leg.
Leg
#10 #7 #9 #7 #12
#4
Safety Lock Assembly
7. Attach the NET POSTS, #17, to the center of the table and slip the NET, #18, onto the posts.
Clip the strap buckles together when folding
the two table tops for storage. Note: Remove
Net Posts and Net, and store in bag, before
folding table for storage.
Move up the safety lock, so it catches the bottom
of the table, when folding up for storage.
Move down, to disengage table, before opening
the tables for play.
THANK YOU!ASSEMBLY INSTRUCTIONS (CONT.)
7
Inside
Outside

CONGRATULATIONS!
8
CARE AND USE
1. This product is intended for INDOORuse only.
2. Do NOT sit, climb or lean on the table.
3. Do NOT drag the table when moving it as this will damage the legs.
You have now assembled your Game Table.
Please note the Care and Use instructions below to
ensure years of trouble free use of your game table.

1-YEAR LIMITED WARRANTY
This product is warranted to the original purchaser to be free from defects in material or workmanship
for a period of one year from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from misuse,
abuse or negligence will void this warranty. This warranty does not cover scratching or damage that
may result from normal usage.
This product is not intended for institutional or commercial use; the manufacturer does not assume
any liability for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the defective
product. During the warranty period, the manufacturer shall repair or replace defective parts at no
cost tothe purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
The manufacturer reserves the right to make substitutions to warranty claims if parts are unavailable
or obsolete.
The manufacturer shall not be liable for loss of use of the product or other consequential or incidental
costs, expenses or damages incurred by the consumer of any other use. The user assumes all risk of
injury resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
. Neither the manufac-
turer nor any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to process
all warranty claims. The model number and part numbers found within the assembly
instructions will be required when submitting any parts requests or warranty claims.
For further warranty information or inquiries, please call 800-759-0977

9’ BOUNCEBACK TABLE TENNIS - NG2325B
Parts List
PARTS
HARD
WARE PACK - NGP5942
#5 #7 #9#10
6 MM WASHER
9/13
4X12 MM SCREW 8 MM BUSHING
#12
6 MM
LOCKING NUT
#1NGP5931 #2NGP5932 #3NGP5933 #4NGP5934 #6NGP5935
LEG PANEL
#8NGP5936
TABLE SURFACE SAFETY LOCK METAL BRACKET
LINKAGE TUBE
#11 NGP5937
LOCKING
CASTER
#14 NGP5938 #17 NGP5939 #18 NGP5940 #19 NGP5941 #20 NGP2515 #21 NGP5029
LINKAGE TUBE
W/ STOP BRCKT. NET POST NET CRVD. INNER LEG
TABLE TENNIS
BALL
TABLE TENNIS
PADDLE
#13
#15
ALLEN WRENCH
#16
HEX WRENCH
TABLE SURFACE
6X70 MM BOLT 6X57 MM BOLT
1
2
3
#8
11
17
18
19
4
#5
13