CarNavi-Tech CarPlay NV17 User manual

Apple CarPlay & Android Auto Module
Manual
1

Main Spec.
2
1. Input Spec.
- 1 x USB Input
- 1 x Microphone Input
- 1 x Real Analog Touch Input
2. Output Spec.
- 1 x LVDS(HDMI Connector) Output
- 1 x Audio L/R (3.5ФStereo Jack) Output
- 1 x Mono Speaker
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max

82mm * 134.5mm * 23mm
Dimension
82mm
134.5mm
23mm
* This can change under manufacturer’s circumstance
3

External Appearance
4

Product Composition
Interface 1 EA
AUX Cable 1 EA
Power Cable 1 EA SPEAKER Cable 1ea (Optional)
HDMI Cable 1 EA
TOUCH Cable 1 Ea (optional)
5
Microphone 1 EA
SPEAKER 1 EA (Optional)

External Appearance
POWER/CAN
LVDS&UART
OUT
Touch
Smartphone Connection Made Switch to
Enter Setting Microphone Input
6
Speaker
AUX

*POWER Connect
①ACC
②GND
①②
*Touch Connect
①Y-
②X-
③Y+
④X+
①②③④
7
Connector Pin Assignment

Setting
8
Press the setting button for 3
seconds.
When the above menu appears, press the setting
button for 3 seconds.
Correct the touch when the screen
changes.
Vehicle must be powered on without OEM touch
display.
①
③
②
④

Install Manual
9
4P LVDS & UART
Interface
Iphone
Apple CarPlay Screen

Q & A
10
1. Check the LED status first when interface failure..
- If there is no abnormality after the power is applied, the green LED flashes in units of 1 second.
- If the red LED flashes for 1 second, there is no.
- If the red LED is on continuously, the interface itself is bad.
- If nothing turns on, check that the power and CAN signals are properly connected
2. Q : When the screen turns black
A : LVDS cable itself is bad or bad contact.
3. If you find any symptoms with these symptoms, please contact your distributor
.