Carro CES563FL User manual

Hanging ceiling fan & Installing power adapter & Wire the Fan:
5
WARNING: To reduce the risk of re, electric shock or other personal injury, mount the fan only
to an outlet box or supporting system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
WARNING: Check to see that all connections are tight, including ground, and that no bare wire
is visible at the wire nuts (except for the ground wire).
WARNING: To reduce the risk of re or electric shock, do not use this fan with any solid-state
speed control device.
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before wiring.
Hang the installed ceiling fan on the hanger mounted to the ceiling as shown in the schematic Fig 5.1,
pay attention to the Fig 5.1
partial enlargement schematic arrow. The ball groove needs to match the hanger boss.
Connect the wire of the power adapter through the hanger as below Fig 5.2 :
Connect the AC input to the house electricity, then hide AC wire into ceiling. The yellow wire from
hanger connect with the ground wire from the house with plastic wire nut to protect and then hide
inside the ceiling. Put the power adapter inside the hanger and connect the DC output wire with the
wire from motor through the down rod. (Make sure all the wires connect with right color as below
Fig 5.2 ) Make sure all wires are tucked in the canopy.
Fig 5.1 Fig 5.2
Raise Canopy
6
Make sure all wires are tucked in the canopy. Raise the canopy to the mounting bracket, aligning the
two screws on the canopy with the holes on the bracket, Secure the canopy to the mounting bracket
with the painted screws, as Fig 6.1.
Installation is now complete. Turn on the power. Test your fan using the remote control. Observe
whether there is red light ashing in the center of the ceiling fan glass lampshade.
Fig 6.1 Fig 6.2
REMOTE CONTROL FUNCTIONS AND SETTINGS:
Precondition：As turn on the fan then long press button “Y” for 3-5 second, when hear the buzzer "DI"
it means that the remote and the product code are successfully operated with normal functions.
Do not expose the remote control to rain or water.
In addition to the included remote control, you can control the fan through the “Carro Smart Fan” app.
First download the app for free from the App Store or Google Play or scan the barcode below.①
Open the app to create your account. ②
The account with “Carro Smart Fan” can be through E-mail or Mobile phone to sign up, if you already
have the account number just log in with your user name and password.
Set up a WiFi connection. ③
Step#1, press “Add new device”
Step#2, make sure fan power up.
Step#3, press “smart ceiling fan” button and “NEXT” button..
Step#4, select your home WIF and enter password
Step#5, open “settings” to WIFI.
Step#6, connect to Carro “Smart Fan-xxxx” WIFI signal.
Step#7, reopen the APP
Wait for the connection completed, will enter the main control UI.
The app will walk you through the main screen and show you how to create schedules, change fan ④
speeds, dim the light, switch between Summer/Winter mode, invite users, create groups and much
more. Refer to app instructions for more details.
After pressing the yellow button for ve seconds, the buzzer rings, the WiFi module is reset, and the ⑤
mode is re entered.
After power-on, the mobile phone can directly search for the device to connect. If you need to reset, ⑥
please press the fth point.
If you need to reconnect the device to connect according to the above operation, you can.
NOTE: Maximum of 1 fan can operate on a circuit through the remote control.
Name
DC ceiling fan with light
Voltage
120V
Model
CES563FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.2kg(20.3lbs.)
Rpm
50-205rpm
Net weight
6.4kg(14.1lbs.)
Noise
≤60dB(A)
Size
1420X1420X490mm
(60X60X19.3inch）
Airow
7800CMF
Please read and save the instructions carefully before using this product
1. Check the support connections, brackets, and blade attachments twice a year. Make sure they are
secure. Because of the fan’s natural movement, some connections may become loose over time. It is
not necessary to remove the fan from the ceiling.
2. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the nish.
The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3. (Optional) Apply a light coat of furniture polish to the wood blades.
4. (Optional) Cover small scratches with a light application of shoe polish.
Do not:
1. Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an
electrical shock.
2. Apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings.
Warm Reminding:
Disconnect power to the fan location before clean the fan.
Your fan may occasionally jerk forward and backward upon start up. This is normal and does not affect
fan operation.
Try these troubleshooting steps before contacting Customer Service.
Issue
Solution
The fan will not
start.
1. Make sure the fan is receiving power.
2. Check your circuit breaker or fuse panel and wall switch for functionality
check the red light whether on ashing.
3. Make sure the fan is properly wired and grounded.
4. Make sure the plastic lm in the remote's battery tray has been
removed.
The fan wobbles
Remove the airfoils and make sure the colored dot sticker on each airfoil
matches the corresponding sticker on the motor hub. If the stickers do not
match, move the airfoils to the matching attachment points.
LED OFF
1.Make sure LED wire connect with controller.
2.Make sure the whole machine is energized.
3.Make sure the remote control code is matched.
The fan is noisy
during operation
Bring the fan to a complete stop.
• Gently turn the airfoils by hand, making sure there are no fan parts
rubbing on the
motor hub when the fan rotates.
• Check all mounting and fan hardware. If loose, tighten.
Try these troubleshooting steps before contacting Customer Service. For additional
operation, maintenance, and troubleshooting information, please contact us directly.
Turns the fan on or off.
Forward/Reverse fan direction.
Increases fan speed.
Varies fan speed to simulate a natural breeze Adjusts your fan speed overnight to keep you
comfortable while you sleep.
Turns yellow light on or off and RF pairing.
Turns white light on or off and WIFI pairing.
(Press "W" button for 5 seconds and paired device will disconnect with the connected fan)
Dim the lights
Decreases fan speed.
Name
DC ceiling fan with light
Voltage
120V
Model
CES603FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.3kg(20.5lbs.)
Rpm
50-190rpm
Net weight
6.5kg(14.3lbs.)
Noise
≤60dB(A)
Size
1500X1500X490mm
(60X60X19.3inch)
Airow
7800CMF
ITEM: CES563FL / CES603FL
SMART CEILING FAN INSTALLATION GUIDE
Black_
White_
_Yellow
Technical Parameter: AC 120V 60HZ
APP CONTROL CONNECTION:
BASIC PRODUCT PARAMETERS:
CARE AND CLEANING:
TROUBLESHOOTING:
SCAN AND DOWNLOAD
6 7 8 9

IMPORTANT: PLEASE READ BEFORE INSTALLATION:
① Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.
CAUTION: Read all instructions and safety information before installing your new fan. Review ②
accompanying assembly diagrams.
Make sure that all electrical connections are in accordance with National Electrical Code, ③
ANSI/NFPA 70 and local codes. Hire a qualied electrician if you are unfamiliar with installing
electrical wiring.
Make sure the installation site you choose allows the fan blades to rotate without any obstructions. ④
Allow a minimum clearance of 2.1m(7 feet) from the oor and 18 inches from the tip of the blades to
the wall.
WARNING - To reduce the risk of re, electric shock, or personal injury, mount to outlet box marked ⑤
"Acceptable for Fan Support of 15.9 kg (35 lbs) or less" and use mounting screws provided with the
outlet box.
CAUTION: To reduce the risk of injury use only the screws provided with the outlet box in ⑥
conjunction with the lock washers provided with the fan.
The outlet box and support structure must be securely mounted and capable of reliably supporting ⑦
a minimum of 35 pounds. Use only U.L. Listed outlet boxes marked "Acceptable for Fan Support of
15.9 kg (35 lbs) or less".
After you install the fan, make sure that all mounting components are secured to prevent the fan ⑧
from falling.
Do not insert anything into the fan blades while the fan is operating.⑨
To change the direction of the rotation of the blades the fan must be in operation mode.⑩
All set screws must be checked and retightened where necessary before installation.
WARNING - To reduce the risk of personal injury, do not bend the blade bracket when installing
the brackets, balancing the blades, or cleaning the fan. do not insert foreign objects in between
rotating fan blades.
CAUTION -To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan
before installing light kit.
After making the wire connections, the wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
The splices after being made should be turned upward and pushed carefully up into the outlet
box. Conductor of a fan identied as grounded conductor is to be connected to a grounded conductor
of power supply, conductor of fan identied as ungrounded conductor to be connected to an
ungrounded conductor of power supply, conductor of fan identied for equipment grounding to be
connected to an equipment-grounding conductor.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING - To reduce the risk of electric shock, this fan must be installed with a general use,
isolating wall control/switch.
WARNING - To reduce the risk of r or electric shock, do not use this fan with any solid-state speed
control device.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover
all possible conditions and situations that may occur. It must be understood that common sense,
caution and care are factors which cannot be built into this product. These factors must be supplied
by the person (s) installing, caring for and operating the unit.
CAUTION: The light source is designed for this specic application and can overheat if serviced by
untrained personnel. If any servicing is required, the product should be returned to an authorized
service facility for examination or repair.
PRODUCT INSTRUCTION:
Fig 1.1
Contact a licensed electrician
if you are uncomfortable
performing electrical work. A
licensed electrician must install
the fan if required by local code.
Do not use the fan with a dimmer
switch.Turn off power at breaker.
BEFORE YOU START TOOLS AND MATERIALS REQUIRED
ST5×24 Setscrew
Input AC 120V
M4×10 Screws
Mounting Bracket
Extension Tube
Canopy
Wiring Cover
Motor Hub
Airfoils
M6×36 Rod Screw
M6×12 Airfoils’ Screw
M4×8 Screw
Lampshade
Lower Cover
AC Adapter
IInstall Airfoils:
1
1.1 Put out the motor hub from the package box and place it upside down on the motor paper holder.
Make sure each airfoil matches the corresponding place with the tri-color label on the hub and tighten
the screws. (Fig 1.1)
1.2 Three airfoils installed. (Fig 1.2)
Fig 1.2
Tri-color label
Install Lampshade
2
2.1 Make sure the motor hub shaft xed with a screwdriver. Make sure the motor hub not rotate. Make
sure the lampshade xed part hold matches into the snap joint. Push down the lampshade and rotate
to right side. (Fig 2.1)
Fig 2.1
Bolt X4
Wood Ceiling Concrete ceiling
Bolt X4
2.2 Insert the 2P terminal and the 3P terminal into the corresponding terminal interfaces on the circuit
board, and then tighten the upper limit screws to tighten them.(Fig 2.2)
2.3 Snap the small cover into the hole of the lampshade and rm it in the direction indicated by the
arrow. (Fig 2.3)
Fig 2.2 Fig 2.3
3.2 Connect the wiring harness from the extension tube to the receptacle from motor wire as left
picture. After nished, hide the wire into extension tube.(Fig 3.2)
Take out a part of the power cord to avoid the screw holes as right picture, make sure the screw rmly.
Attach Extension Tube:
3
3.1 Put extension tube as Fig.3.1 install as right picture.(Pls select the suitable length of rod for your
ceiling.)
Fig 3.1
Extension tube
Canopy
Wiring cover trim
Fig 3.2
Assembly — Hanging the Fan:
4
Install the hanger to the ceiling box, as shown in Fig 4.1 below. Rotate the hanger in different
directions so that the hanger mounting holes match the screw holes of the ceiling box. Note: This
hanger is a general-purpose cable box.
If the hanger is installed at the outlet box, the hanger should be installed on the outlet box with two
screws matching the outlet box itself, as shown in the schematic Fig 4.1.
The hanger can also be mounted to the wooden ceiling beam, and then the four self-tapping screws
can be used to lock the symmetrical holes on the left and right sides of the hanger. Note: The wooden
ceiling beam must meet the tensile test of 30KG for installation, such as Fig 4.2. Shown.
It is also possible to install the hanger directly to the concrete ceiling, and install four expansion
screws to the left and right symmetrical holes of the hanger to lock the ceiling, as shown in the
schematic Fig 4.3.
If you have an angled or vaulted ceiling: (Fig 4.4)
1.When installing the hanger, the hanger groove is upward;
2. You will need a longer downrod;
3.If your ceiling angle is greater than 30°,you will also need an Angled Mounting Kit.
Fig 4.1 Fig 4.2 Fig 4.3
11
12
13
14
15
16
Step ladder
Phillips
screwdriver
External
hexagonal wrench
Wire
stripper
SAFETY PRECAUTION：INSTALLATION:
ST5×24
Setscrew
M6×36
Rod Screw
M6×12
Airfoils’ Screw
AC Adapter
1 2 3 4 5
Fig 4.4
M4×8
Screw
Wiring cap
1 pc 4 pcs 6 pcs 2 pcs 2 pcs 1 pc
SCREWS BAG
<30°

IMPORTANT: PLEASE READ BEFORE INSTALLATION:
① Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.
CAUTION: Read all instructions and safety information before installing your new fan. Review ②
accompanying assembly diagrams.
Make sure that all electrical connections are in accordance with National Electrical Code, ③
ANSI/NFPA 70 and local codes. Hire a qualied electrician if you are unfamiliar with installing
electrical wiring.
Make sure the installation site you choose allows the fan blades to rotate without any obstructions. ④
Allow a minimum clearance of 2.1m(7 feet) from the oor and 18 inches from the tip of the blades to
the wall.
WARNING - To reduce the risk of re, electric shock, or personal injury, mount to outlet box marked ⑤
"Acceptable for Fan Support of 15.9 kg (35 lbs) or less" and use mounting screws provided with the
outlet box.
CAUTION: To reduce the risk of injury use only the screws provided with the outlet box in ⑥
conjunction with the lock washers provided with the fan.
The outlet box and support structure must be securely mounted and capable of reliably supporting ⑦
a minimum of 35 pounds. Use only U.L. Listed outlet boxes marked "Acceptable for Fan Support of
15.9 kg (35 lbs) or less".
After you install the fan, make sure that all mounting components are secured to prevent the fan ⑧
from falling.
Do not insert anything into the fan blades while the fan is operating.⑨
To change the direction of the rotation of the blades the fan must be in operation mode.⑩
All set screws must be checked and retightened where necessary before installation.
WARNING - To reduce the risk of personal injury, do not bend the blade bracket when installing
the brackets, balancing the blades, or cleaning the fan. do not insert foreign objects in between
rotating fan blades.
CAUTION -To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan
before installing light kit.
After making the wire connections, the wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
The splices after being made should be turned upward and pushed carefully up into the outlet
box. Conductor of a fan identied as grounded conductor is to be connected to a grounded conductor
of power supply, conductor of fan identied as ungrounded conductor to be connected to an
ungrounded conductor of power supply, conductor of fan identied for equipment grounding to be
connected to an equipment-grounding conductor.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING - To reduce the risk of electric shock, this fan must be installed with a general use,
isolating wall control/switch.
WARNING - To reduce the risk of r or electric shock, do not use this fan with any solid-state speed
control device.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover
all possible conditions and situations that may occur. It must be understood that common sense,
caution and care are factors which cannot be built into this product. These factors must be supplied
by the person (s) installing, caring for and operating the unit.
CAUTION: The light source is designed for this specic application and can overheat if serviced by
untrained personnel. If any servicing is required, the product should be returned to an authorized
service facility for examination or repair.
PRODUCT INSTRUCTION:
Fig 1.1
Contact a licensed electrician
if you are uncomfortable
performing electrical work. A
licensed electrician must install
the fan if required by local code.
Do not use the fan with a dimmer
switch.Turn off power at breaker.
BEFORE YOU START TOOLS AND MATERIALS REQUIRED
ST5×24 Setscrew
Input AC 120V
M4×10 Screws
Mounting Bracket
Extension Tube
Canopy
Wiring Cover
Motor Hub
Airfoils
M6×36 Rod Screw
M6×12 Airfoils’ Screw
M4×8 Screw
Lampshade
Lower Cover
AC Adapter
IInstall Airfoils:
1
1.1 Put out the motor hub from the package box and place it upside down on the motor paper holder.
Make sure each airfoil matches the corresponding place with the tri-color label on the hub and tighten
the screws. (Fig 1.1)
1.2 Three airfoils installed. (Fig 1.2)
Fig 1.2
Tri-color label
Install Lampshade
2
2.1 Make sure the motor hub shaft xed with a screwdriver. Make sure the motor hub not rotate. Make
sure the lampshade xed part hold matches into the snap joint. Push down the lampshade and rotate
to right side. (Fig 2.1)
Fig 2.1
Bolt X4
Wood Ceiling Concrete ceiling
Bolt X4
2.2 Insert the 2P terminal and the 3P terminal into the corresponding terminal interfaces on the circuit
board, and then tighten the upper limit screws to tighten them.(Fig 2.2)
2.3 Snap the small cover into the hole of the lampshade and rm it in the direction indicated by the
arrow. (Fig 2.3)
Fig 2.2 Fig 2.3
3.2 Connect the wiring harness from the extension tube to the receptacle from motor wire as left
picture. After nished, hide the wire into extension tube.(Fig 3.2)
Take out a part of the power cord to avoid the screw holes as right picture, make sure the screw rmly.
Attach Extension Tube:
3
3.1 Put extension tube as Fig.3.1 install as right picture.(Pls select the suitable length of rod for your
ceiling.)
Fig 3.1
Extension tube
Canopy
Wiring cover trim
Fig 3.2
Assembly — Hanging the Fan:
4
Install the hanger to the ceiling box, as shown in Fig 4.1 below. Rotate the hanger in different
directions so that the hanger mounting holes match the screw holes of the ceiling box. Note: This
hanger is a general-purpose cable box.
If the hanger is installed at the outlet box, the hanger should be installed on the outlet box with two
screws matching the outlet box itself, as shown in the schematic Fig 4.1.
The hanger can also be mounted to the wooden ceiling beam, and then the four self-tapping screws
can be used to lock the symmetrical holes on the left and right sides of the hanger. Note: The wooden
ceiling beam must meet the tensile test of 30KG for installation, such as Fig 4.2. Shown.
It is also possible to install the hanger directly to the concrete ceiling, and install four expansion
screws to the left and right symmetrical holes of the hanger to lock the ceiling, as shown in the
schematic Fig 4.3.
If you have an angled or vaulted ceiling: (Fig 4.4)
1.When installing the hanger, the hanger groove is upward;
2. You will need a longer downrod;
3.If your ceiling angle is greater than 30°,you will also need an Angled Mounting Kit.
Fig 4.1 Fig 4.2 Fig 4.3
11
12
13
14
15
16
Step ladder
Phillips
screwdriver
External
hexagonal wrench
Wire
stripper
SAFETY PRECAUTION：INSTALLATION:
ST5×24
Setscrew
M6×36
Rod Screw
M6×12
Airfoils’ Screw
AC Adapter
1 2 3 4 5
Fig 4.4
M4×8
Screw
Wiring cap
1 pc 4 pcs 6 pcs 2 pcs 2 pcs 1 pc
SCREWS BAG
<30°

IMPORTANT: PLEASE READ BEFORE INSTALLATION:
① Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.
CAUTION: Read all instructions and safety information before installing your new fan. Review ②
accompanying assembly diagrams.
Make sure that all electrical connections are in accordance with National Electrical Code, ③
ANSI/NFPA 70 and local codes. Hire a qualied electrician if you are unfamiliar with installing
electrical wiring.
Make sure the installation site you choose allows the fan blades to rotate without any obstructions. ④
Allow a minimum clearance of 2.1m(7 feet) from the oor and 18 inches from the tip of the blades to
the wall.
WARNING - To reduce the risk of re, electric shock, or personal injury, mount to outlet box marked ⑤
"Acceptable for Fan Support of 15.9 kg (35 lbs) or less" and use mounting screws provided with the
outlet box.
CAUTION: To reduce the risk of injury use only the screws provided with the outlet box in ⑥
conjunction with the lock washers provided with the fan.
The outlet box and support structure must be securely mounted and capable of reliably supporting ⑦
a minimum of 35 pounds. Use only U.L. Listed outlet boxes marked "Acceptable for Fan Support of
15.9 kg (35 lbs) or less".
After you install the fan, make sure that all mounting components are secured to prevent the fan ⑧
from falling.
Do not insert anything into the fan blades while the fan is operating.⑨
To change the direction of the rotation of the blades the fan must be in operation mode.⑩
All set screws must be checked and retightened where necessary before installation.
WARNING - To reduce the risk of personal injury, do not bend the blade bracket when installing
the brackets, balancing the blades, or cleaning the fan. do not insert foreign objects in between
rotating fan blades.
CAUTION -To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan
before installing light kit.
After making the wire connections, the wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
The splices after being made should be turned upward and pushed carefully up into the outlet
box. Conductor of a fan identied as grounded conductor is to be connected to a grounded conductor
of power supply, conductor of fan identied as ungrounded conductor to be connected to an
ungrounded conductor of power supply, conductor of fan identied for equipment grounding to be
connected to an equipment-grounding conductor.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING - To reduce the risk of electric shock, this fan must be installed with a general use,
isolating wall control/switch.
WARNING - To reduce the risk of r or electric shock, do not use this fan with any solid-state speed
control device.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover
all possible conditions and situations that may occur. It must be understood that common sense,
caution and care are factors which cannot be built into this product. These factors must be supplied
by the person (s) installing, caring for and operating the unit.
CAUTION: The light source is designed for this specic application and can overheat if serviced by
untrained personnel. If any servicing is required, the product should be returned to an authorized
service facility for examination or repair.
PRODUCT INSTRUCTION:
Fig 1.1
Contact a licensed electrician
if you are uncomfortable
performing electrical work. A
licensed electrician must install
the fan if required by local code.
Do not use the fan with a dimmer
switch.Turn off power at breaker.
BEFORE YOU START TOOLS AND MATERIALS REQUIRED
ST5×24 Setscrew
Input AC 120V
M4×10 Screws
Mounting Bracket
Extension Tube
Canopy
Wiring Cover
Motor Hub
Airfoils
M6×36 Rod Screw
M6×12 Airfoils’ Screw
M4×8 Screw
Lampshade
Lower Cover
AC Adapter
IInstall Airfoils:
1
1.1 Put out the motor hub from the package box and place it upside down on the motor paper holder.
Make sure each airfoil matches the corresponding place with the tri-color label on the hub and tighten
the screws. (Fig 1.1)
1.2 Three airfoils installed. (Fig 1.2)
Fig 1.2
Tri-color label
Install Lampshade
2
2.1 Make sure the motor hub shaft xed with a screwdriver. Make sure the motor hub not rotate. Make
sure the lampshade xed part hold matches into the snap joint. Push down the lampshade and rotate
to right side. (Fig 2.1)
Fig 2.1
Bolt X4
Wood Ceiling Concrete ceiling
Bolt X4
2.2 Insert the 2P terminal and the 3P terminal into the corresponding terminal interfaces on the circuit
board, and then tighten the upper limit screws to tighten them.(Fig 2.2)
2.3 Snap the small cover into the hole of the lampshade and rm it in the direction indicated by the
arrow. (Fig 2.3)
Fig 2.2 Fig 2.3
3.2 Connect the wiring harness from the extension tube to the receptacle from motor wire as left
picture. After nished, hide the wire into extension tube.(Fig 3.2)
Take out a part of the power cord to avoid the screw holes as right picture, make sure the screw rmly.
Attach Extension Tube:
3
3.1 Put extension tube as Fig.3.1 install as right picture.(Pls select the suitable length of rod for your
ceiling.)
Fig 3.1
Extension tube
Canopy
Wiring cover trim
Fig 3.2
Assembly — Hanging the Fan:
4
Install the hanger to the ceiling box, as shown in Fig 4.1 below. Rotate the hanger in different
directions so that the hanger mounting holes match the screw holes of the ceiling box. Note: This
hanger is a general-purpose cable box.
If the hanger is installed at the outlet box, the hanger should be installed on the outlet box with two
screws matching the outlet box itself, as shown in the schematic Fig 4.1.
The hanger can also be mounted to the wooden ceiling beam, and then the four self-tapping screws
can be used to lock the symmetrical holes on the left and right sides of the hanger. Note: The wooden
ceiling beam must meet the tensile test of 30KG for installation, such as Fig 4.2. Shown.
It is also possible to install the hanger directly to the concrete ceiling, and install four expansion
screws to the left and right symmetrical holes of the hanger to lock the ceiling, as shown in the
schematic Fig 4.3.
If you have an angled or vaulted ceiling: (Fig 4.4)
1.When installing the hanger, the hanger groove is upward;
2. You will need a longer downrod;
3.If your ceiling angle is greater than 30°,you will also need an Angled Mounting Kit.
Fig 4.1 Fig 4.2 Fig 4.3
11
12
13
14
15
16
Step ladder
Phillips
screwdriver
External
hexagonal wrench
Wire
stripper
SAFETY PRECAUTION：INSTALLATION:
ST5×24
Setscrew
M6×36
Rod Screw
M6×12
Airfoils’ Screw
AC Adapter
1 2 3 4 5
Fig 4.4
M4×8
Screw
Wiring cap
1 pc 4 pcs 6 pcs 2 pcs 2 pcs 1 pc
SCREWS BAG
<30°

IMPORTANT: PLEASE READ BEFORE INSTALLATION:
① Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.
CAUTION: Read all instructions and safety information before installing your new fan. Review ②
accompanying assembly diagrams.
Make sure that all electrical connections are in accordance with National Electrical Code, ③
ANSI/NFPA 70 and local codes. Hire a qualied electrician if you are unfamiliar with installing
electrical wiring.
Make sure the installation site you choose allows the fan blades to rotate without any obstructions. ④
Allow a minimum clearance of 2.1m(7 feet) from the oor and 18 inches from the tip of the blades to
the wall.
WARNING - To reduce the risk of re, electric shock, or personal injury, mount to outlet box marked ⑤
"Acceptable for Fan Support of 15.9 kg (35 lbs) or less" and use mounting screws provided with the
outlet box.
CAUTION: To reduce the risk of injury use only the screws provided with the outlet box in ⑥
conjunction with the lock washers provided with the fan.
The outlet box and support structure must be securely mounted and capable of reliably supporting ⑦
a minimum of 35 pounds. Use only U.L. Listed outlet boxes marked "Acceptable for Fan Support of
15.9 kg (35 lbs) or less".
After you install the fan, make sure that all mounting components are secured to prevent the fan ⑧
from falling.
Do not insert anything into the fan blades while the fan is operating.⑨
To change the direction of the rotation of the blades the fan must be in operation mode.⑩
All set screws must be checked and retightened where necessary before installation.
WARNING - To reduce the risk of personal injury, do not bend the blade bracket when installing
the brackets, balancing the blades, or cleaning the fan. do not insert foreign objects in between
rotating fan blades.
CAUTION -To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan
before installing light kit.
After making the wire connections, the wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
The splices after being made should be turned upward and pushed carefully up into the outlet
box. Conductor of a fan identied as grounded conductor is to be connected to a grounded conductor
of power supply, conductor of fan identied as ungrounded conductor to be connected to an
ungrounded conductor of power supply, conductor of fan identied for equipment grounding to be
connected to an equipment-grounding conductor.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING - To reduce the risk of electric shock, this fan must be installed with a general use,
isolating wall control/switch.
WARNING - To reduce the risk of r or electric shock, do not use this fan with any solid-state speed
control device.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover
all possible conditions and situations that may occur. It must be understood that common sense,
caution and care are factors which cannot be built into this product. These factors must be supplied
by the person (s) installing, caring for and operating the unit.
CAUTION: The light source is designed for this specic application and can overheat if serviced by
untrained personnel. If any servicing is required, the product should be returned to an authorized
service facility for examination or repair.
PRODUCT INSTRUCTION:
Fig 1.1
Contact a licensed electrician
if you are uncomfortable
performing electrical work. A
licensed electrician must install
the fan if required by local code.
Do not use the fan with a dimmer
switch.Turn off power at breaker.
BEFORE YOU START TOOLS AND MATERIALS REQUIRED
ST5×24 Setscrew
Input AC 120V
M4×10 Screws
Mounting Bracket
Extension Tube
Canopy
Wiring Cover
Motor Hub
Airfoils
M6×36 Rod Screw
M6×12 Airfoils’ Screw
M4×8 Screw
Lampshade
Lower Cover
AC Adapter
IInstall Airfoils:
1
1.1 Put out the motor hub from the package box and place it upside down on the motor paper holder.
Make sure each airfoil matches the corresponding place with the tri-color label on the hub and tighten
the screws. (Fig 1.1)
1.2 Three airfoils installed. (Fig 1.2)
Fig 1.2
Tri-color label
Install Lampshade
2
2.1 Make sure the motor hub shaft xed with a screwdriver. Make sure the motor hub not rotate. Make
sure the lampshade xed part hold matches into the snap joint. Push down the lampshade and rotate
to right side. (Fig 2.1)
Fig 2.1
Bolt X4
Wood Ceiling Concrete ceiling
Bolt X4
2.2 Insert the 2P terminal and the 3P terminal into the corresponding terminal interfaces on the circuit
board, and then tighten the upper limit screws to tighten them.(Fig 2.2)
2.3 Snap the small cover into the hole of the lampshade and rm it in the direction indicated by the
arrow. (Fig 2.3)
Fig 2.2 Fig 2.3
3.2 Connect the wiring harness from the extension tube to the receptacle from motor wire as left
picture. After nished, hide the wire into extension tube.(Fig 3.2)
Take out a part of the power cord to avoid the screw holes as right picture, make sure the screw rmly.
Attach Extension Tube:
3
3.1 Put extension tube as Fig.3.1 install as right picture.(Pls select the suitable length of rod for your
ceiling.)
Fig 3.1
Extension tube
Canopy
Wiring cover trim
Fig 3.2
Assembly — Hanging the Fan:
4
Install the hanger to the ceiling box, as shown in Fig 4.1 below. Rotate the hanger in different
directions so that the hanger mounting holes match the screw holes of the ceiling box. Note: This
hanger is a general-purpose cable box.
If the hanger is installed at the outlet box, the hanger should be installed on the outlet box with two
screws matching the outlet box itself, as shown in the schematic Fig 4.1.
The hanger can also be mounted to the wooden ceiling beam, and then the four self-tapping screws
can be used to lock the symmetrical holes on the left and right sides of the hanger. Note: The wooden
ceiling beam must meet the tensile test of 30KG for installation, such as Fig 4.2. Shown.
It is also possible to install the hanger directly to the concrete ceiling, and install four expansion
screws to the left and right symmetrical holes of the hanger to lock the ceiling, as shown in the
schematic Fig 4.3.
If you have an angled or vaulted ceiling: (Fig 4.4)
1.When installing the hanger, the hanger groove is upward;
2. You will need a longer downrod;
3.If your ceiling angle is greater than 30°,you will also need an Angled Mounting Kit.
Fig 4.1 Fig 4.2 Fig 4.3
11
12
13
14
15
16
Step ladder
Phillips
screwdriver
External
hexagonal wrench
Wire
stripper
SAFETY PRECAUTION：INSTALLATION:
ST5×24
Setscrew
M6×36
Rod Screw
M6×12
Airfoils’ Screw
AC Adapter
1 2 3 4 5
Fig 4.4
M4×8
Screw
Wiring cap
1 pc 4 pcs 6 pcs 2 pcs 2 pcs 1 pc
SCREWS BAG
<30°

IMPORTANT: PLEASE READ BEFORE INSTALLATION:
① Before you begin installing the fan, shut power off at the circuit breaker of the fuse box.
CAUTION: Read all instructions and safety information before installing your new fan. Review ②
accompanying assembly diagrams.
Make sure that all electrical connections are in accordance with National Electrical Code, ③
ANSI/NFPA 70 and local codes. Hire a qualied electrician if you are unfamiliar with installing
electrical wiring.
Make sure the installation site you choose allows the fan blades to rotate without any obstructions. ④
Allow a minimum clearance of 2.1m(7 feet) from the oor and 18 inches from the tip of the blades to
the wall.
WARNING - To reduce the risk of re, electric shock, or personal injury, mount to outlet box marked ⑤
"Acceptable for Fan Support of 15.9 kg (35 lbs) or less" and use mounting screws provided with the
outlet box.
CAUTION: To reduce the risk of injury use only the screws provided with the outlet box in ⑥
conjunction with the lock washers provided with the fan.
The outlet box and support structure must be securely mounted and capable of reliably supporting ⑦
a minimum of 35 pounds. Use only U.L. Listed outlet boxes marked "Acceptable for Fan Support of
15.9 kg (35 lbs) or less".
After you install the fan, make sure that all mounting components are secured to prevent the fan ⑧
from falling.
Do not insert anything into the fan blades while the fan is operating.⑨
To change the direction of the rotation of the blades the fan must be in operation mode.⑩
All set screws must be checked and retightened where necessary before installation.
WARNING - To reduce the risk of personal injury, do not bend the blade bracket when installing
the brackets, balancing the blades, or cleaning the fan. do not insert foreign objects in between
rotating fan blades.
CAUTION -To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan
before installing light kit.
After making the wire connections, the wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on one side of the outlet box and the ungrounded conductor
on the other side of the outlet box.
The splices after being made should be turned upward and pushed carefully up into the outlet
box. Conductor of a fan identied as grounded conductor is to be connected to a grounded conductor
of power supply, conductor of fan identied as ungrounded conductor to be connected to an
ungrounded conductor of power supply, conductor of fan identied for equipment grounding to be
connected to an equipment-grounding conductor.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING - To reduce the risk of electric shock, this fan must be installed with a general use,
isolating wall control/switch.
WARNING - To reduce the risk of r or electric shock, do not use this fan with any solid-state speed
control device.
NOTE: The important safeguards and instructions appearing in this manual are not meant to cover
all possible conditions and situations that may occur. It must be understood that common sense,
caution and care are factors which cannot be built into this product. These factors must be supplied
by the person (s) installing, caring for and operating the unit.
CAUTION: The light source is designed for this specic application and can overheat if serviced by
untrained personnel. If any servicing is required, the product should be returned to an authorized
service facility for examination or repair.
PRODUCT INSTRUCTION:
Fig 1.1
Contact a licensed electrician
if you are uncomfortable
performing electrical work. A
licensed electrician must install
the fan if required by local code.
Do not use the fan with a dimmer
switch.Turn off power at breaker.
BEFORE YOU START TOOLS AND MATERIALS REQUIRED
ST5×24 Setscrew
Input AC 120V
M4×10 Screws
Mounting Bracket
Extension Tube
Canopy
Wiring Cover
Motor Hub
Airfoils
M6×36 Rod Screw
M6×12 Airfoils’ Screw
M4×8 Screw
Lampshade
Lower Cover
AC Adapter
IInstall Airfoils:
1
1.1 Put out the motor hub from the package box and place it upside down on the motor paper holder.
Make sure each airfoil matches the corresponding place with the tri-color label on the hub and tighten
the screws. (Fig 1.1)
1.2 Three airfoils installed. (Fig 1.2)
Fig 1.2
Tri-color label
Install Lampshade
2
2.1 Make sure the motor hub shaft xed with a screwdriver. Make sure the motor hub not rotate. Make
sure the lampshade xed part hold matches into the snap joint. Push down the lampshade and rotate
to right side. (Fig 2.1)
Fig 2.1
Bolt X4
Wood Ceiling Concrete ceiling
Bolt X4
2.2 Insert the 2P terminal and the 3P terminal into the corresponding terminal interfaces on the circuit
board, and then tighten the upper limit screws to tighten them.(Fig 2.2)
2.3 Snap the small cover into the hole of the lampshade and rm it in the direction indicated by the
arrow. (Fig 2.3)
Fig 2.2 Fig 2.3
3.2 Connect the wiring harness from the extension tube to the receptacle from motor wire as left
picture. After nished, hide the wire into extension tube.(Fig 3.2)
Take out a part of the power cord to avoid the screw holes as right picture, make sure the screw rmly.
Attach Extension Tube:
3
3.1 Put extension tube as Fig.3.1 install as right picture.(Pls select the suitable length of rod for your
ceiling.)
Fig 3.1
Extension tube
Canopy
Wiring cover trim
Fig 3.2
Assembly — Hanging the Fan:
4
Install the hanger to the ceiling box, as shown in Fig 4.1 below. Rotate the hanger in different
directions so that the hanger mounting holes match the screw holes of the ceiling box. Note: This
hanger is a general-purpose cable box.
If the hanger is installed at the outlet box, the hanger should be installed on the outlet box with two
screws matching the outlet box itself, as shown in the schematic Fig 4.1.
The hanger can also be mounted to the wooden ceiling beam, and then the four self-tapping screws
can be used to lock the symmetrical holes on the left and right sides of the hanger. Note: The wooden
ceiling beam must meet the tensile test of 30KG for installation, such as Fig 4.2. Shown.
It is also possible to install the hanger directly to the concrete ceiling, and install four expansion
screws to the left and right symmetrical holes of the hanger to lock the ceiling, as shown in the
schematic Fig 4.3.
If you have an angled or vaulted ceiling: (Fig 4.4)
1.When installing the hanger, the hanger groove is upward;
2. You will need a longer downrod;
3.If your ceiling angle is greater than 30°,you will also need an Angled Mounting Kit.
Fig 4.1 Fig 4.2 Fig 4.3
11
12
13
14
15
16
Step ladder
Phillips
screwdriver
External
hexagonal wrench
Wire
stripper
SAFETY PRECAUTION：INSTALLATION:
ST5×24
Setscrew
M6×36
Rod Screw
M6×12
Airfoils’ Screw
AC Adapter
1 2 3 4 5
Fig 4.4
M4×8
Screw
Wiring cap
1 pc 4 pcs 6 pcs 2 pcs 2 pcs 1 pc
SCREWS BAG
<30°

Hanging ceiling fan & Installing power adapter & Wire the Fan:
5
WARNING: To reduce the risk of re, electric shock or other personal injury, mount the fan only
to an outlet box or supporting system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
WARNING: Check to see that all connections are tight, including ground, and that no bare wire
is visible at the wire nuts (except for the ground wire).
WARNING: To reduce the risk of re or electric shock, do not use this fan with any solid-state
speed control device.
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before wiring.
Hang the installed ceiling fan on the hanger mounted to the ceiling as shown in the schematic Fig 5.1,
pay attention to the Fig 5.1
partial enlargement schematic arrow. The ball groove needs to match the hanger boss.
Connect the wire of the power adapter through the hanger as below Fig 5.2 :
Connect the AC input to the house electricity, then hide AC wire into ceiling. The yellow wire from
hanger connect with the ground wire from the house with plastic wire nut to protect and then hide
inside the ceiling. Put the power adapter inside the hanger and connect the DC output wire with the
wire from motor through the down rod. (Make sure all the wires connect with right color as below
Fig 5.2 ) Make sure all wires are tucked in the canopy.
Fig 5.1 Fig 5.2
Raise Canopy
6
Make sure all wires are tucked in the canopy. Raise the canopy to the mounting bracket, aligning the
two screws on the canopy with the holes on the bracket, Secure the canopy to the mounting bracket
with the painted screws, as Fig 6.1.
Installation is now complete. Turn on the power. Test your fan using the remote control. Observe
whether there is red light ashing in the center of the ceiling fan glass lampshade.
Fig 6.1 Fig 6.2
REMOTE CONTROL FUNCTIONS AND SETTINGS:
Precondition：As turn on the fan then long press button “Y” for 3-5 second, when hear the buzzer "DI"
it means that the remote and the product code are successfully operated with normal functions.
Do not expose the remote control to rain or water.
In addition to the included remote control, you can control the fan through the “Carro Smart Fan” app.
First download the app for free from the App Store or Google Play or scan the barcode below.①
Open the app to create your account. ②
The account with “Carro Smart Fan” can be through E-mail or Mobile phone to sign up, if you already
have the account number just log in with your user name and password.
Set up a WiFi connection. ③
Step#1, press “Add new device”
Step#2, make sure fan power up.
Step#3, press “smart ceiling fan” button and “NEXT” button..
Step#4, select your home WIF and enter password
Step#5, open “settings” to WIFI.
Step#6, connect to Carro “Smart Fan-xxxx” WIFI signal.
Step#7, reopen the APP
Wait for the connection completed, will enter the main control UI.
The app will walk you through the main screen and show you how to create schedules, change fan ④
speeds, dim the light, switch between Summer/Winter mode, invite users, create groups and much
more. Refer to app instructions for more details.
After pressing the yellow button for ve seconds, the buzzer rings, the WiFi module is reset, and the ⑤
mode is re entered.
After power-on, the mobile phone can directly search for the device to connect. If you need to reset, ⑥
please press the fth point.
If you need to reconnect the device to connect according to the above operation, you can.
NOTE: Maximum of 1 fan can operate on a circuit through the remote control.
Name
DC ceiling fan with light
Voltage
120V
Model
CES563FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.2kg(20.3lbs.)
Rpm
50-205rpm
Net weight
6.4kg(14.1lbs.)
Noise
≤60dB(A)
Size
1420X1420X490mm
(60X60X19.3inch）
Airow
7800CMF
Please read and save the instructions carefully before using this product
1. Check the support connections, brackets, and blade attachments twice a year. Make sure they are
secure. Because of the fan’s natural movement, some connections may become loose over time. It is
not necessary to remove the fan from the ceiling.
2. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the nish.
The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3. (Optional) Apply a light coat of furniture polish to the wood blades.
4. (Optional) Cover small scratches with a light application of shoe polish.
Do not:
1. Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an
electrical shock.
2. Apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings.
Warm Reminding:
Disconnect power to the fan location before clean the fan.
Your fan may occasionally jerk forward and backward upon start up. This is normal and does not affect
fan operation.
Try these troubleshooting steps before contacting Customer Service.
Issue
Solution
The fan will not
start.
1. Make sure the fan is receiving power.
2. Check your circuit breaker or fuse panel and wall switch for functionality
check the red light whether on ashing.
3. Make sure the fan is properly wired and grounded.
4. Make sure the plastic lm in the remote's battery tray has been
removed.
The fan wobbles
Remove the airfoils and make sure the colored dot sticker on each airfoil
matches the corresponding sticker on the motor hub. If the stickers do not
match, move the airfoils to the matching attachment points.
LED OFF
1.Make sure LED wire connect with controller.
2.Make sure the whole machine is energized.
3.Make sure the remote control code is matched.
The fan is noisy
during operation
Bring the fan to a complete stop.
• Gently turn the airfoils by hand, making sure there are no fan parts
rubbing on the
motor hub when the fan rotates.
• Check all mounting and fan hardware. If loose, tighten.
Try these troubleshooting steps before contacting Customer Service. For additional
operation, maintenance, and troubleshooting information, please contact us directly.
Turns the fan on or off.
Forward/Reverse fan direction.
Increases fan speed.
Varies fan speed to simulate a natural breeze Adjusts your fan speed overnight to keep you
comfortable while you sleep.
Turns yellow light on or off and RF pairing.
Turns white light on or off and WIFI pairing.
(Press "W" button for 5 seconds and paired device will disconnect with the connected fan)
Dim the lights
Decreases fan speed.
Name
DC ceiling fan with light
Voltage
120V
Model
CES603FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.3kg(20.5lbs.)
Rpm
50-190rpm
Net weight
6.5kg(14.3lbs.)
Noise
≤60dB(A)
Size
1500X1500X490mm
(60X60X19.3inch)
Airow
7800CMF
ITEM: CES563FL / CES603FL
SMART CEILING FAN INSTALLATION GUIDE
Black_
White_
_Yellow
Technical Parameter: AC 120V 60HZ
APP CONTROL CONNECTION:
BASIC PRODUCT PARAMETERS:
CARE AND CLEANING:
TROUBLESHOOTING:
SCAN AND DOWNLOAD
6 7 8 9

Hanging ceiling fan & Installing power adapter & Wire the Fan:
5
WARNING: To reduce the risk of re, electric shock or other personal injury, mount the fan only
to an outlet box or supporting system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
WARNING: Check to see that all connections are tight, including ground, and that no bare wire
is visible at the wire nuts (except for the ground wire).
WARNING: To reduce the risk of re or electric shock, do not use this fan with any solid-state
speed control device.
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before wiring.
Hang the installed ceiling fan on the hanger mounted to the ceiling as shown in the schematic Fig 5.1,
pay attention to the Fig 5.1
partial enlargement schematic arrow. The ball groove needs to match the hanger boss.
Connect the wire of the power adapter through the hanger as below Fig 5.2 :
Connect the AC input to the house electricity, then hide AC wire into ceiling. The yellow wire from
hanger connect with the ground wire from the house with plastic wire nut to protect and then hide
inside the ceiling. Put the power adapter inside the hanger and connect the DC output wire with the
wire from motor through the down rod. (Make sure all the wires connect with right color as below
Fig 5.2 ) Make sure all wires are tucked in the canopy.
Fig 5.1 Fig 5.2
Raise Canopy
6
Make sure all wires are tucked in the canopy. Raise the canopy to the mounting bracket, aligning the
two screws on the canopy with the holes on the bracket, Secure the canopy to the mounting bracket
with the painted screws, as Fig 6.1.
Installation is now complete. Turn on the power. Test your fan using the remote control. Observe
whether there is red light ashing in the center of the ceiling fan glass lampshade.
Fig 6.1 Fig 6.2
REMOTE CONTROL FUNCTIONS AND SETTINGS:
Precondition：As turn on the fan then long press button “Y” for 3-5 second, when hear the buzzer "DI"
it means that the remote and the product code are successfully operated with normal functions.
Do not expose the remote control to rain or water.
In addition to the included remote control, you can control the fan through the “Carro Smart Fan” app.
First download the app for free from the App Store or Google Play or scan the barcode below.①
Open the app to create your account. ②
The account with “Carro Smart Fan” can be through E-mail or Mobile phone to sign up, if you already
have the account number just log in with your user name and password.
Set up a WiFi connection. ③
Step#1, press “Add new device”
Step#2, make sure fan power up.
Step#3, press “smart ceiling fan” button and “NEXT” button..
Step#4, select your home WIF and enter password
Step#5, open “settings” to WIFI.
Step#6, connect to Carro “Smart Fan-xxxx” WIFI signal.
Step#7, reopen the APP
Wait for the connection completed, will enter the main control UI.
The app will walk you through the main screen and show you how to create schedules, change fan ④
speeds, dim the light, switch between Summer/Winter mode, invite users, create groups and much
more. Refer to app instructions for more details.
After pressing the yellow button for ve seconds, the buzzer rings, the WiFi module is reset, and the ⑤
mode is re entered.
After power-on, the mobile phone can directly search for the device to connect. If you need to reset, ⑥
please press the fth point.
If you need to reconnect the device to connect according to the above operation, you can.
NOTE: Maximum of 1 fan can operate on a circuit through the remote control.
Name
DC ceiling fan with light
Voltage
120V
Model
CES563FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.2kg(20.3lbs.)
Rpm
50-205rpm
Net weight
6.4kg(14.1lbs.)
Noise
≤60dB(A)
Size
1420X1420X490mm
(60X60X19.3inch）
Airow
7800CMF
Please read and save the instructions carefully before using this product
1. Check the support connections, brackets, and blade attachments twice a year. Make sure they are
secure. Because of the fan’s natural movement, some connections may become loose over time. It is
not necessary to remove the fan from the ceiling.
2. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the nish.
The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3. (Optional) Apply a light coat of furniture polish to the wood blades.
4. (Optional) Cover small scratches with a light application of shoe polish.
Do not:
1. Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an
electrical shock.
2. Apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings.
Warm Reminding:
Disconnect power to the fan location before clean the fan.
Your fan may occasionally jerk forward and backward upon start up. This is normal and does not affect
fan operation.
Try these troubleshooting steps before contacting Customer Service.
Issue
Solution
The fan will not
start.
1. Make sure the fan is receiving power.
2. Check your circuit breaker or fuse panel and wall switch for functionality
check the red light whether on ashing.
3. Make sure the fan is properly wired and grounded.
4. Make sure the plastic lm in the remote's battery tray has been
removed.
The fan wobbles
Remove the airfoils and make sure the colored dot sticker on each airfoil
matches the corresponding sticker on the motor hub. If the stickers do not
match, move the airfoils to the matching attachment points.
LED OFF
1.Make sure LED wire connect with controller.
2.Make sure the whole machine is energized.
3.Make sure the remote control code is matched.
The fan is noisy
during operation
Bring the fan to a complete stop.
• Gently turn the airfoils by hand, making sure there are no fan parts
rubbing on the
motor hub when the fan rotates.
• Check all mounting and fan hardware. If loose, tighten.
Try these troubleshooting steps before contacting Customer Service. For additional
operation, maintenance, and troubleshooting information, please contact us directly.
Turns the fan on or off.
Forward/Reverse fan direction.
Increases fan speed.
Varies fan speed to simulate a natural breeze Adjusts your fan speed overnight to keep you
comfortable while you sleep.
Turns yellow light on or off and RF pairing.
Turns white light on or off and WIFI pairing.
(Press "W" button for 5 seconds and paired device will disconnect with the connected fan)
Dim the lights
Decreases fan speed.
Name
DC ceiling fan with light
Voltage
120V
Model
CES603FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.3kg(20.5lbs.)
Rpm
50-190rpm
Net weight
6.5kg(14.3lbs.)
Noise
≤60dB(A)
Size
1500X1500X490mm
(60X60X19.3inch)
Airow
7800CMF
ITEM: CES563FL / CES603FL
SMART CEILING FAN INSTALLATION GUIDE
Black_
White_
_Yellow
Technical Parameter: AC 120V 60HZ
APP CONTROL CONNECTION:
BASIC PRODUCT PARAMETERS:
CARE AND CLEANING:
TROUBLESHOOTING:
SCAN AND DOWNLOAD
6 7 8 9

Hanging ceiling fan & Installing power adapter & Wire the Fan:
5
WARNING: To reduce the risk of re, electric shock or other personal injury, mount the fan only
to an outlet box or supporting system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
WARNING: Check to see that all connections are tight, including ground, and that no bare wire
is visible at the wire nuts (except for the ground wire).
WARNING: To reduce the risk of re or electric shock, do not use this fan with any solid-state
speed control device.
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before wiring.
Hang the installed ceiling fan on the hanger mounted to the ceiling as shown in the schematic Fig 5.1,
pay attention to the Fig 5.1
partial enlargement schematic arrow. The ball groove needs to match the hanger boss.
Connect the wire of the power adapter through the hanger as below Fig 5.2 :
Connect the AC input to the house electricity, then hide AC wire into ceiling. The yellow wire from
hanger connect with the ground wire from the house with plastic wire nut to protect and then hide
inside the ceiling. Put the power adapter inside the hanger and connect the DC output wire with the
wire from motor through the down rod. (Make sure all the wires connect with right color as below
Fig 5.2 ) Make sure all wires are tucked in the canopy.
Fig 5.1 Fig 5.2
Raise Canopy
6
Make sure all wires are tucked in the canopy. Raise the canopy to the mounting bracket, aligning the
two screws on the canopy with the holes on the bracket, Secure the canopy to the mounting bracket
with the painted screws, as Fig 6.1.
Installation is now complete. Turn on the power. Test your fan using the remote control. Observe
whether there is red light ashing in the center of the ceiling fan glass lampshade.
Fig 6.1 Fig 6.2
REMOTE CONTROL FUNCTIONS AND SETTINGS:
Precondition：As turn on the fan then long press button “Y” for 3-5 second, when hear the buzzer "DI"
it means that the remote and the product code are successfully operated with normal functions.
Do not expose the remote control to rain or water.
In addition to the included remote control, you can control the fan through the “Carro Smart Fan” app.
First download the app for free from the App Store or Google Play or scan the barcode below.①
Open the app to create your account. ②
The account with “Carro Smart Fan” can be through E-mail or Mobile phone to sign up, if you already
have the account number just log in with your user name and password.
Set up a WiFi connection. ③
Step#1, press “Add new device”
Step#2, make sure fan power up.
Step#3, press “smart ceiling fan” button and “NEXT” button..
Step#4, select your home WIF and enter password
Step#5, open “settings” to WIFI.
Step#6, connect to Carro “Smart Fan-xxxx” WIFI signal.
Step#7, reopen the APP
Wait for the connection completed, will enter the main control UI.
The app will walk you through the main screen and show you how to create schedules, change fan ④
speeds, dim the light, switch between Summer/Winter mode, invite users, create groups and much
more. Refer to app instructions for more details.
After pressing the yellow button for ve seconds, the buzzer rings, the WiFi module is reset, and the ⑤
mode is re entered.
After power-on, the mobile phone can directly search for the device to connect. If you need to reset, ⑥
please press the fth point.
If you need to reconnect the device to connect according to the above operation, you can.
NOTE: Maximum of 1 fan can operate on a circuit through the remote control.
Name
DC ceiling fan with light
Voltage
120V
Model
CES563FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.2kg(20.3lbs.)
Rpm
50-205rpm
Net weight
6.4kg(14.1lbs.)
Noise
≤60dB(A)
Size
1420X1420X490mm
(60X60X19.3inch）
Airow
7800CMF
Please read and save the instructions carefully before using this product
1. Check the support connections, brackets, and blade attachments twice a year. Make sure they are
secure. Because of the fan’s natural movement, some connections may become loose over time. It is
not necessary to remove the fan from the ceiling.
2. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the nish.
The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3. (Optional) Apply a light coat of furniture polish to the wood blades.
4. (Optional) Cover small scratches with a light application of shoe polish.
Do not:
1. Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an
electrical shock.
2. Apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings.
Warm Reminding:
Disconnect power to the fan location before clean the fan.
Your fan may occasionally jerk forward and backward upon start up. This is normal and does not affect
fan operation.
Try these troubleshooting steps before contacting Customer Service.
Issue
Solution
The fan will not
start.
1. Make sure the fan is receiving power.
2. Check your circuit breaker or fuse panel and wall switch for functionality
check the red light whether on ashing.
3. Make sure the fan is properly wired and grounded.
4. Make sure the plastic lm in the remote's battery tray has been
removed.
The fan wobbles
Remove the airfoils and make sure the colored dot sticker on each airfoil
matches the corresponding sticker on the motor hub. If the stickers do not
match, move the airfoils to the matching attachment points.
LED OFF
1.Make sure LED wire connect with controller.
2.Make sure the whole machine is energized.
3.Make sure the remote control code is matched.
The fan is noisy
during operation
Bring the fan to a complete stop.
• Gently turn the airfoils by hand, making sure there are no fan parts
rubbing on the
motor hub when the fan rotates.
• Check all mounting and fan hardware. If loose, tighten.
Try these troubleshooting steps before contacting Customer Service. For additional
operation, maintenance, and troubleshooting information, please contact us directly.
Turns the fan on or off.
Forward/Reverse fan direction.
Increases fan speed.
Varies fan speed to simulate a natural breeze Adjusts your fan speed overnight to keep you
comfortable while you sleep.
Turns yellow light on or off and RF pairing.
Turns white light on or off and WIFI pairing.
(Press "W" button for 5 seconds and paired device will disconnect with the connected fan)
Dim the lights
Decreases fan speed.
Name
DC ceiling fan with light
Voltage
120V
Model
CES603FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.3kg(20.5lbs.)
Rpm
50-190rpm
Net weight
6.5kg(14.3lbs.)
Noise
≤60dB(A)
Size
1500X1500X490mm
(60X60X19.3inch)
Airow
7800CMF
ITEM: CES563FL / CES603FL
SMART CEILING FAN INSTALLATION GUIDE
Black_
White_
_Yellow
Technical Parameter: AC 120V 60HZ
APP CONTROL CONNECTION:
BASIC PRODUCT PARAMETERS:
CARE AND CLEANING:
TROUBLESHOOTING:
SCAN AND DOWNLOAD
6 7 8 9

Hanging ceiling fan & Installing power adapter & Wire the Fan:
5
WARNING: To reduce the risk of re, electric shock or other personal injury, mount the fan only
to an outlet box or supporting system marked acceptable for fan support and use the mounting
screws provided with the outlet box.
WARNING: Check to see that all connections are tight, including ground, and that no bare wire
is visible at the wire nuts (except for the ground wire).
WARNING: To reduce the risk of re or electric shock, do not use this fan with any solid-state
speed control device.
WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse
box before wiring.
Hang the installed ceiling fan on the hanger mounted to the ceiling as shown in the schematic Fig 5.1,
pay attention to the Fig 5.1
partial enlargement schematic arrow. The ball groove needs to match the hanger boss.
Connect the wire of the power adapter through the hanger as below Fig 5.2 :
Connect the AC input to the house electricity, then hide AC wire into ceiling. The yellow wire from
hanger connect with the ground wire from the house with plastic wire nut to protect and then hide
inside the ceiling. Put the power adapter inside the hanger and connect the DC output wire with the
wire from motor through the down rod. (Make sure all the wires connect with right color as below
Fig 5.2 ) Make sure all wires are tucked in the canopy.
Fig 5.1 Fig 5.2
Raise Canopy
6
Make sure all wires are tucked in the canopy. Raise the canopy to the mounting bracket, aligning the
two screws on the canopy with the holes on the bracket, Secure the canopy to the mounting bracket
with the painted screws, as Fig 6.1.
Installation is now complete. Turn on the power. Test your fan using the remote control. Observe
whether there is red light ashing in the center of the ceiling fan glass lampshade.
Fig 6.1 Fig 6.2
REMOTE CONTROL FUNCTIONS AND SETTINGS:
Precondition：As turn on the fan then long press button “Y” for 3-5 second, when hear the buzzer "DI"
it means that the remote and the product code are successfully operated with normal functions.
Do not expose the remote control to rain or water.
In addition to the included remote control, you can control the fan through the “Carro Smart Fan” app.
First download the app for free from the App Store or Google Play or scan the barcode below.①
Open the app to create your account. ②
The account with “Carro Smart Fan” can be through E-mail or Mobile phone to sign up, if you already
have the account number just log in with your user name and password.
Set up a WiFi connection. ③
Step#1, press “Add new device”
Step#2, make sure fan power up.
Step#3, press “smart ceiling fan” button and “NEXT” button..
Step#4, select your home WIF and enter password
Step#5, open “settings” to WIFI.
Step#6, connect to Carro “Smart Fan-xxxx” WIFI signal.
Step#7, reopen the APP
Wait for the connection completed, will enter the main control UI.
The app will walk you through the main screen and show you how to create schedules, change fan ④
speeds, dim the light, switch between Summer/Winter mode, invite users, create groups and much
more. Refer to app instructions for more details.
After pressing the yellow button for ve seconds, the buzzer rings, the WiFi module is reset, and the ⑤
mode is re entered.
After power-on, the mobile phone can directly search for the device to connect. If you need to reset, ⑥
please press the fth point.
If you need to reconnect the device to connect according to the above operation, you can.
NOTE: Maximum of 1 fan can operate on a circuit through the remote control.
Name
DC ceiling fan with light
Voltage
120V
Model
CES563FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.2kg(20.3lbs.)
Rpm
50-205rpm
Net weight
6.4kg(14.1lbs.)
Noise
≤60dB(A)
Size
1420X1420X490mm
(60X60X19.3inch）
Airow
7800CMF
Please read and save the instructions carefully before using this product
1. Check the support connections, brackets, and blade attachments twice a year. Make sure they are
secure. Because of the fan’s natural movement, some connections may become loose over time. It is
not necessary to remove the fan from the ceiling.
2. Clean your fan periodically. Use only a soft brush or lint-free cloth to avoid scratching the nish.
The plating is sealed with a lacquer to minimize discoloration or tarnishing.
3. (Optional) Apply a light coat of furniture polish to the wood blades.
4. (Optional) Cover small scratches with a light application of shoe polish.
Do not:
1. Use water when cleaning. Water could damage the motor, or the wood, or possibly cause an
electrical shock.
2. Apply oil to your fan or motor. The motor has permanently-lubricated sealed ball bearings.
Warm Reminding:
Disconnect power to the fan location before clean the fan.
Your fan may occasionally jerk forward and backward upon start up. This is normal and does not affect
fan operation.
Try these troubleshooting steps before contacting Customer Service.
Issue
Solution
The fan will not
start.
1. Make sure the fan is receiving power.
2. Check your circuit breaker or fuse panel and wall switch for functionality
check the red light whether on ashing.
3. Make sure the fan is properly wired and grounded.
4. Make sure the plastic lm in the remote's battery tray has been
removed.
The fan wobbles
Remove the airfoils and make sure the colored dot sticker on each airfoil
matches the corresponding sticker on the motor hub. If the stickers do not
match, move the airfoils to the matching attachment points.
LED OFF
1.Make sure LED wire connect with controller.
2.Make sure the whole machine is energized.
3.Make sure the remote control code is matched.
The fan is noisy
during operation
Bring the fan to a complete stop.
• Gently turn the airfoils by hand, making sure there are no fan parts
rubbing on the
motor hub when the fan rotates.
• Check all mounting and fan hardware. If loose, tighten.
Try these troubleshooting steps before contacting Customer Service. For additional
operation, maintenance, and troubleshooting information, please contact us directly.
Turns the fan on or off.
Forward/Reverse fan direction.
Increases fan speed.
Varies fan speed to simulate a natural breeze Adjusts your fan speed overnight to keep you
comfortable while you sleep.
Turns yellow light on or off and RF pairing.
Turns white light on or off and WIFI pairing.
(Press "W" button for 5 seconds and paired device will disconnect with the connected fan)
Dim the lights
Decreases fan speed.
Name
DC ceiling fan with light
Voltage
120V
Model
CES603FL
Watt
66W(Fan 30W Lamp 36W)
Gross weight
9.3kg(20.5lbs.)
Rpm
50-190rpm
Net weight
6.5kg(14.3lbs.)
Noise
≤60dB(A)
Size
1500X1500X490mm
(60X60X19.3inch)
Airow
7800CMF
ITEM: CES563FL / CES603FL
SMART CEILING FAN INSTALLATION GUIDE
Black_
White_
_Yellow
Technical Parameter: AC 120V 60HZ
APP CONTROL CONNECTION:
BASIC PRODUCT PARAMETERS:
CARE AND CLEANING:
TROUBLESHOOTING:
SCAN AND DOWNLOAD
6 7 8 9