Casa Lusso eden User manual

www.casalusso.com.au
FAILURE TO COMPLY WITH ANY OF THE ABOVE INSTRUCTIONS WILL VOID ALL WARRANTIES
Drawer Front Installation Instructions
FEATURES
GENERAL INFORMATION
The warranty will not apply if:
• The product has been damaged by improper use;
• The product has not been used in accordance with any applicable instruction guide;
• The purchaser has attempted to modify or repair the product;
• The purchaser has failed to observe the cleaning and maintenance guidelines;
Important:
• Take Care While Transporting and Handling Goods.
• This product should be installed by a qualied, licensed Tradesperson.
To tradesperson: Please ensure a copy of the installation instructions
is left with the end user for future reference.
The warranty will not apply if:
• The product has been damaged by improper use;
• The product has not been used in accordance with any applicable instruction guide;
• The purchaser has attempted to modify or repair the product;
• The purchaser has failed to observe the cleaning and maintenance guidelines;
Important:
• Take Care While Transporting and Handling Goods.
• This product should be installed by a qualied, licensed Tradesperson.
To tradesperson: Please ensure a copy of the installation instructions
is left with the end user for future reference.
Material: Moisture resistant 2 pac matte white
Installation: Floor Mount
Includes: 2 x drawer fronts only.
Premium Warranty (Domestic Use) :
5 year replacement product and parts:
1 year labour
Ensure drawer front/s are inspected fully prior to installation. If damage has occured, or a visable defect exists, do not proceed with installation
and advise supplier immediately. Warranty will be void if product is installed.
Ensure drawer front/s are inspected fully prior to installation. If damage has occured, or a visable defect exists, do not proceed with installation
and advise supplier immediately. Warranty will be void if product is installed.
PRIOR TO INSTALLATION
For FCAB-1200 Floor Mount Vanities
5 YEAR
WARRANTY
Congratulations on the purchase of your new Casa Lusso Vanity. We hope you and your family enjoy your new product
and consider us for any future projects. Casa Lusso products have been manufactured under the highest standards of
quality and workmanship.

www.casalusso.com.au
FAILURE TO COMPLY WITH ANY OF THE ABOVE INSTRUCTIONS WILL VOID ALL WARRANTIES
Drawer Front Installation Instructions
PRODUCT CONTENTS
4 x Fixing
Brackets
4 x 4x16
Screws
4 x Support Rails
INSTRUCTIONS
6 x Angle Irons
1x Cabinet
Drawer Fixing Parts supplied with Casa Lusso Cabinets FCAB-1200
4 x 4x25
Screws
16 x 35x14
Screws
4 x Embedments
Insert the two Embedments as pictured in diagram A and hammer into place.
Using a screwdriver, screw both fixing
brackets as pictued in diagram B.
4x16
Screw
4x25
Screw
35x14
Screw
For FCAB-1200 Floor Mount Vanities
2 x Drawer Fronts

FAILURE TO COMPLY WITH ANY OF THE ABOVE INSTRUCTIONS WILL VOID ALL WARRANTIES
Drawer Front Installation Instructions
Adjusting fixings to secure drawer front
Allows you to adjust the drawer Up and Down.
Simply rotate where indicated RIGHT to move the
drawer UP and LEFT to move the drawer DOWN.
Adjusting drawer front height
Allows you to adjust the drawer Left and Right.
Use a screwdriver where indicated and adjust
until drawer front is centered.
Adjusting drawer front so its centre to cabinet
By pressing the blue button, this releases the
drawer front from the runners. Please note you will
also need to unscrew the Angle Irons.
Removing the drawer front from drawer runners
Inserting Support Posts
Drawer front
with fixing
bracket
installed
‘Clicks’
in place into
the drawer
as pictured.
Push Support
Post into the
embedment.
Shift cover
cap over as
pictured and
push until it
‘clicks’.
For FCAB-1200 Floor Mount Vanities

www.casalusso.com.au
FAILURE TO COMPLY WITH ANY OF THE ABOVE INSTRUCTIONS WILL VOID ALL WARRANTIES
Drawer Front Installation Instructions
Install the Angle Irons where indicated in diagram C to underneath the drawer.
Angle Irons
35x14
Screws
For FCAB-1200 Floor Mount Vanities
Repeat all steps for second drawer front.