CasaOne U801 User manual

Assembly Parts :
SOFA
A: 4 PCS
B: 4 PCS
C: 4 PCS
D:
E: 1 PC
F: 1 PC
STEP 1 :
PLACE (A) THE PLASTIC LEG ON THE BOTTOM OF THE SOFA.
MAKE SURE THE HOLE AT THE PLASTIC LEG TALLY WITH THE
HOLE ON THE BOTTOM OF THE SOFA. FOR ONE LEG ONLY NEED
ONE ( C ) BOLTS AND ONE (B) WASHER. TIGHTEN THE PLASTIC
WITH (C ) BOLTS BY PUTTING (B) WASHER IN BETWEEN BOLTS
AS DIAGRAM. TIGHTEN IT BY USING (D) ALLEN KEY. REPEAT
THE SAME METHODE UNTILL ALL THE LEGS BEEN ASSEMBLED.
REMARKS : FOR THE CENTER LEG, THERE IS HOLE AT THE CENTER
ON THE BOTTOM OF THE SOFA. TIGHTEN UP THE CENTER LEG
BY TURN IT CLOCKWISE. PLEASE REMEMBER TO PUT THE
PLASTIC WASHER FIRST BEFORE TIGHTEN UP THE CENTER LEG.
PLASTIC WASHER
CENTER LEG
ALLEN KEY
WASHER
5 PCS
4 PCS
BOLTS
5 PCS
4 PCS
1 PC
Assembly Instruction
LOVESEAT
CHAIR
PLASTIC LEG
5 PCS
4 PCS
The job is now complete!
Please dispose of packaging thoughtfully
Model : U801

Cleaning (Code "X" )
Clean this fabric only by vacuuming or light brushing to prevent accumulation
of duct or grime. Water -based foam cleaner or solvent based cleaning agents
of any kind may cause excessive shrinking, staining or distortion of the surface pile
and, therefore, should not be used.
Nettoyage ( code "X" )
Ne nettoyage ce tissu que par aspiration pour éviter l'accumulation de poussiere
ou de salete.
Les nettoyants mousseux a base d'eau et autres solvants peuvent faire rétrécir,
tordre ou même tacher le tissu en surface et par conséquent, ne doivent pas
être utilisés.
Please dispose of packaging thoughtfully