Casio IT-3100 User manual

CASIO
IT-3100 Series
Quick Start Guide
(Version 1.02)
CASIO Computer Co., Ltd.
Copyright ©2010. All rights reserved.
May 2010

Table of the Contents
Editorial Record 4
Preface 5
Chapter 1. Product Overview 6
1.1 Features at a Glance 6
1.2 Library Configuration 7
1.3 Development Reference Manuals 8
1.4 Sample Program 9
Chapter 2. Prerequisites 10
2.1 Skills Required 10
2.2 Hardware Required 11
2.3 Software Required 14
Chapter 3. Installing SDK to PC 16
3.1 Application Development 16
3.2 Installing CASIO SDK Files 17
Chapter 4. Connecting Power Supply to Cradle 21
4.1 HA-B61IO 21
Chapter 5. Connecting the IT-3100 to PC 23
5.1 Installing IRXpress 24
5.1.1 Installing USB Driver 25
5.1.2 Installing RS-232C Driver 35
5.2 ActiveSync Connection via IrDA 42
5.2.1 Installing ActiveSync 42
5.2.2 Setting ActiveSync 43
5.3 IrDA Connection via Windows Mobile Device Center 44
Chapter 6. Setting Up the Development Environment 45
6.1 Installing CAB Files 45
6.2 eMbedded Visual C++ 4.0 46
6.3 Visual Studio 2005 47
6.4 Visual Studio .NET 2003 48
6.5 Use of IT-3000 Software Legacy 49
6.6 Use of .NET Application Legacy 50
Chapter 7. Device Emulator 51
7.1 Software Required 51
7.2 Starting up the Device Emulator 54
7.3 Using the Device Emulator 56
7.3.1 IT-3100 Device Emulator 56
7.3.2 I/O Simulator 57
7.3.3 Connecting via ActiveSync 62
7.4 Debugging Applications 65
7.4.1 Setting Up Build Configuration 65
7.4.2 Debugging Applications 65
Chapter 8. eMbedded Visual C++ 68
8.1 Building a Simple eVC++ 4.0 Test Program 68
8.2 Using CASIO Libraries from eVC++ 4.0 70
Chapter 9. Visual Studio 72
9.1 Using CASIO .NET Libraries from VB 73
9.2 Using CASIO .NET Libraries from C# 75
9.3 Using CASIO Libraries from C++ 77
Chapter 10. Resources 81
2

No part of this document may be produced or transmitted in any form or by any means, electronic
or mechanical, for any purpose, without the express written permission of CASIO Computer Co.,
Ltd. in Tokyo Japan. Information in this document is subject to change without advance notice.
CASIO Computer Co., Ltd. makes no representations or warranties with respect to the contents or
use of this manual and specifically disclaims any express or implied warranties of merchantability
or fitness for any particular purpose.
© 2010 CASIO Computer Co., Ltd. All rights reserved.
3

Editorial Record
Manual
Version
no.
Date edited Page Content
1.00 July 2008 all Original version
7 to 9 In Chapter 1, the contents in Library Configuration,
Development Reference Manuals, and Sample Program
are changed.
15 to 19 In Chapter 3.2, the instruction of installation is changed.
45 The configuration of the CAB files is changed.
50 to 64 In Chapter 7, the description of using eMbedded Visual
C++ 4.0 is added.
51 The limitation of audio system device in chapter of
Device Emulator is deleted.
53 to 59 In Chapter 7, images and usage of I/Osimulator are
changed.
1.01 January 2009
6, 13 to
19, 51 to
78
Microsoft Visual Studio 2008 is added to Development
platform.
14, 16,
23
Supported OS is added. ( Windows 7 / Windows 2008 Server )
53 Note is added at case of using Device Emulator after Windows
Vista OS
1.02 May 2010
17 Chapter 3.2 is modified.
4

Preface
This guide clearly and concisely sets out the information developers need to know to get started with
the CASIO IT-3100 series development. The best methods of connecting to your development
system are covered and step by step instructions for installing and testing the CASIO SDKs are
included.
The purpose of this guide is to get you to the point where you can start development; you should
refer to the library manuals for detailed information on the specific APIs.
5

1. Product Overview
1.1 Features at a Glance
The IT-3100 features a built-in high speed thermal printer capable of printing up to 28 lines per
second and other notable capabilities including the following functions.
Outstanding development environment
•Microsoft®Windows®CE 5.0 English Version as the built-in OS
•Visual Studio 2008
•Visual Studio 2005
•Visual Studio .NET 2003 (Windows® CE .NET Utilities v 1.1 for Visual Studio .NET 2003)
•eMbedded Visual C++ 4.0
Compatibility with various communication systems
•High speed infrared communication with IrDA Ver. 1.1
•Bluetooth® Version 1.2
Small size, light weight (improved portability)
•Dimensions : Approx. 52.5 (W) x 166 (D) x 30.5 (H) mm
•Weight : Approx. 145 g
Improved durability
•Impact resistance : 1.2 m in height *
•Dust/Water-splash proof : IP54 level (compliant with IEC60529 International Standard)
Superb scanning capability
•Readable 1D symbologies
UPC-A, UPC-E, EAN8, EAN13, Codabar, Code11, Code39, Code93, Code128, ITF, MSI,
IATA, GS1 DataBar Omnidirectional, GS1 DataBar Limited, GS1 DataBar Expanded, GS1
DataBar Stacked, GS1 DataBar Expanded Stacked
•Readable 2D symbologies
PDF417, Micro PDF, Code49, Composite, Codablock F, TLC39, GS1 DataBar Stacked, GS1
DataBar Stacked Omnidirectional, GS1 DataBar Expanded Stacked, Aztec, DataMatrix,
Maxicode, QR Code
CPU/Memory
•High-performance CPU
Marvell®PXA255 Application Processor (runs at maximum 400 MHz)
•Large-capacity memory
RAM : 128 MB
F-ROM : 96 MB (user area; approximately 30 MB)
* The drop durability height is a measured value resulting from actual testing. It does not necessarily guarantee the
product from damage.
6

1.2 Library Configuration
The CASIO Software Development Kit (“SDK”) for IT-3100 series provides various libraries listed
in the table. The compatibility on these libraries with ones for IT-3000, see Chapter 6.5 “Use of
IT-3000 Software Legacy”.
Table 1.1
Library Description C++ VB
C#
System Library Library that is used to control the system. Yes Yes
Bluetooth Library Library that is used to control the built-in Bluetooth module. Yes Yes
Printer Library Library that is used to control the built-in Printer module. Yes Yes
Imager Library Library that is used to control the built-in CMOS Imager. Yes Yes
MCR Library Library that is used to control the built-in Magnetic Card
Reader.
Yes Yes
SOBR Library Library that is used to control an external bar code
reader connected to the 8-pin serial port.
Yes Yes
GUI Library (note 2) Library that is used to control the built-in Printer
module in the print system.
Yes Yes
Communication Port Library Library that is used to control communication via the
extension port.
Yes -
JPEG Library Library that is used to handle and manipulate JPEG image
functions.
Yes -
FLINK Library Library that is used to control and carry out
transmission/reception of files between PC and other
device.
Yes Yes
Notes:
1. The abbreviations used in the table are;
C++ :Visual C++
VB :Visual Basic .NET
C# :Visual C# .NET
2. The library changed its name from “Print Library” to “GUI Library”.
The names of the Dynamic Link Libraries for C++ and C#/VB for the device oriented libraries are
listed in the table.
Table 1.2
Library Dynamic Link Library Dynamic Link Library
(Class Library)
System Library SystemLib.dll SystemLibNet.dll
Bluetooth Library BluetoothLib.dll BluetoothLibNet.dll
Printer Library PrinterLib.dll PrinterLibNet.dll
Imager Library ImagerLib.dll ImagerLibNet.dll
MCR Library MCReadLib.dll MCReadLibNet.dll
SOBR Library SerialObrLib.dll SerialObrLibNet.dll
GUI Library Cp780Lib.dll Cp780LibVB.dll
Cp780LibCS.dll
Communication Port Library None None
JPEG Library JpegCe.dll None
FLINK Library FlinkLib.dll MoFlinkLib.dll
7

1.3 Development Reference Manuals
The CASIO Software Development Kit (“SDK”) for IT-3100 series includes the development
reference manuals listed in the table.
Table 1.3
Development Manual Description
Quick Start Guide This reference manual.
Hardware Manual Reference manual that describes hardware specifications in detail on
each dedicated option and IT-300 handheld printer terminal
Software Manual Reference manual that describes software specifications in detail for
all the software integrated in IT-3100 handheld printer terminal.
System Library Manual Reference manual that describes individual functions in detail for
System Library.
Bluetooth Library Manual Reference manual that describes individual functions in detail for
Bluetooth Library.
Printer Library Manual Reference manual that describes individual functions in detail for
Printer Library.
Imager Library Manual Reference manual that describes individual functions in detail for
Imager Library.
MCR Library Manual Reference manual that describes individual functions in detail for
MCR Library.
SOBR Library Manual Reference manual that describes individual functions in detail for
SOBR Library.
GUI Library Manual (note) Reference manual that describes individual functions in detail for
GUI Library.
Communication Port Library Manual Reference manual that describes individual functions in detail for
Communication Port Library.
JPEG Library Manual Reference manual that describes individual functions in detail for
JPEG Library.
FLINK Library Manual Reference manual that describes individual functions in detail for
FLINK Library.
Note:
The library changed its name from “Print Library” to “GUI Library”.
8

1.4 Sample Program
The following sample programs are included in the IT-3100 SDK.
Table 1.4
Sample Program Description
Common Device Control Library
BLUETOOTHLIBSAMPLE Connects the terminal to a Bluetooth printer and prints out data.
CAMERALIBSAMPLE Takes pictures and displays them on the screen. (note 2)
IMGLIBSAMPLE Scans bar codes using the Imager with settings set with Imager setting
file.
IMGLIBSAMPLE2 Program of IMGDemo.exe
OBRLIBSAMPLE Reads a bar code using the Laser library. (note 2)
PRNLIBSAMPLE Prints out data on the built-in printer.
SYSTEMLIBSAMPLE Demonstrates LED and buzzer functions.
JPEG Library
JPEGSAMPLE Displays Jpeg files.
FLINK Library
FLINKLIBSAMPLE Demonstrate infrared communication via FLINK protocol between two
terminals.
Notes:
1. Two-character abbreviation showing the respective development platforms is added at the end
of each folder name.
VC :Visual C++
VB :Visual Basic .NET
CS :Visual C# .NET
2. Some of the sample programs such as CAMERALIBSAMPLE and OBRLIBSAMPLE in
the table do not run because the respective devices are not integrated in the IT-3100.
9

2. Prerequisites
2.1 Skills Required
The following skills are required by developers aiming to develop application software for the
IT-3100.
•Windows programming
•A good knowledge of one or more of the following
- Visual C++
- Visual Basic .NET
- Visual C# .NET
- Browser based applications (not covered in this guide)
The following skills or experience are also desirable.
•Windows CE devices
•ActiveSync
•Some networking experience
10

2.2 Hardware Required
The following models of the IT-3100 series (see Table 2.1) and dedicated options (see Table 2.2) are
available.
•IT-3100
Table 2.1 Available models and features
Model no. RAM MCR C-MOS 8-pin Serial
IT-3100M53E
IT-3100M53E-CN
128 MB No No Yes
IT-3100M54E
IT-3100M54E-CN
128 MB Yes No Yes
IT-3100M55E
IT-3100M55E-CN
128 MB Yes Yes No
IT-3100M55U 128 MB Yes Yes No
IT-3100M56E
IT-3100M56E-CN
128 MB No Yes No
IT-3100M56U 128 MB No Yes No
Note:
“-CN” attached at the end of model number denotes that the model is dedicated for the final
destination of China. A note about compliance with the Chinese “RoHS” requirement promulgated
by the Ministerial Decree No. 39 is included in the carton box; the RoHS compliant seal is affixed
on the body and the seal of the packing material recycle marking is affixed on the carton box.
11

Table 2.2 Available options
Model no. Description
HA-B61IO
HA-B61IO-CN
Bridge Satellite Cradle
HA-B30CHG
HA-B30CHG-CN
Cradle-type Battery Charger
HA-B34AT
HA-B34AT-CN
Battery Charger Car Mount Unit
DT-9723LIC
DT-9723LIC-CN
Battery Pack
DT-9721CHGE
DT-9721CHGE-CN
Battery Charger
AD-S42120BE
AD-S42120BE-CN
AC Adaptor with power cable accompanied
AD-S42120B AC Adaptor without power cable accompanied
AC-CORD-EU Power Cord for AD-S42120B/Europe
AC-CORD-US Power Cord for AD-S42120B/USA and Canada
AC-CORD-TW Power Cord for AD-S42120B/Taiwan
AC-CORD-AU Power Cord for AD-S42120B/Australia
AC-CORD-KR Power Cord for AD-S42120B/Korea
AD-S10095-AE AC Adaptor
AD-S10095-AU AC Adaptor
DT-827CAC
DT-827CAC-CN
Car Power Cable
HA-B80AX
HA-B80AX-CN
RS-232C Cable
HA-B90DCV Screen Protect Cover
HA-B92PCV
HA-B92PCV-CN
Splash Protect Cover
HA-B93PH
HA-B93PH-CN
Paper Holder
DT-887AXA
DT-887AXA-CN
RS-232C Cable
DT-888RSC RS-422 Cable
DT-380USB USB Cable
Note:
“-CN” attached at the end of model number denotes that the model is dedicated for the final
destination of China. A note about compliance with the Chinese “RoHS” requirement promulgated
by the Ministerial Decree No. 39 is included in the carton box; the RoHS compliant seal is affixed
on the body and the seal of the packing material recycle marking is affixed on the carton box.
See the following page for external views of the IT-3100 and the dedicated options.
12

External views of the IT-3100 and the dedicated options
Figure 2.1
13

2.3 Software Required
PC Operating System
•Microsoft Windows 2000 Professional Service Pack 4 or later
•Or Microsoft Windows 2000 Server Service Pack 4 or later
•Or Microsoft Windows XP Professional Service Pack 2 or later
•Or Microsoft Windows 2003 Server Service Pack 1 or later
•Or Microsoft Windows Vista (Business / Ultimate )
•Or Microsoft Windows 7
•Or Microsoft Windows Server 2008
The following software tools and libraries are required in order to develop software for the IT-3100.
Please ensure that you download or purchase the correct Microsoft tools as appropriate.
C/C++
•Microsoft Visual Studio 2008 (not free of charge)
•Microsoft Visual Studio 2005 (not free of charge)
•Microsoft eMbedded Visual C++ 4.0
Download for free from;
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=1DACDB3D-
50D1-41B2-A107-FA75AE960856
•Microsoft eMbedded Visual C++ 4.0 SP4
Download for free from;
http://www.microsoft.com/downloads/details.aspx?familyid=4A4ED1F4-91D3-4DBE-986E-
A812984318E5&displaylang=en
•Microsoft ActiveSync 4.2 (or later)
Download for free from;
http://www.microsoft.com/downloads/details.aspx?FamilyID=7269173a-28bf-4cac-a682-58d
3233efb4c&DisplayLang=en
•Microsoft Windows Mobile Device Center 6.1 (for Windows Vista)
Download for free from;
http://www.microsoft.com/downloads/details.aspx?familyid=46F72DF1-E46A-4A5F-A791-0
9F07AAA1914&displaylang=en
Visual Basic/Visual C#
•Microsoft Visual Studio 2008 (not free of charge)
•Microsoft Visual Studio 2005 (not free of charge)
•Microsoft Visual Studio .NET 2003 (not free of charge)
•Windows CE Utilities for Visual Studio .NET 2003 Add-on Pack 1.1
From Microsoft web site, see
http://www.microsoft.com/downloads/details.aspx?familyid=7ec99ca6-2095-4086-b0cc-7c6c
39b28762&displaylang=en
•Microsoft ActiveSync 4.2 (or later)
Download for free from;
http://www.microsoft.com/downloads/details.aspx?FamilyID=7269173a-28bf-4cac-a682-58d
3233efb4c&DisplayLang=en
•Microsoft Windows Mobile Device Center 6.1 (for Windows Vista)
Download for free from;
14

http://www.microsoft.com/downloads/details.aspx?familyid=46F72DF1-E46A-4A5F-A791-0
9F07AAA1914&displaylang=en
CASIO IT-3100 SDK
Download the IT-3100 SDK from
http://www2.casio.co.jp/system_en/pa/PADealer/
(The site requires your user name and password. Enter your user name and password as issued by CASIO.)
15

3. Installing SDK to PC
3.1 Application Development
This chapter explains about what you need to set up for the development environment before
starting your application development.
1. Installing Development Platform
Install Microsoft’s development platform which supports Visual Studio 2005. For detail, refer to
Chapter 2.3 “Software Required”.
2. Installing CASIO SDK to PC
Install Casio’s SDK and various libraries if necessary. For installation method, refer to Chapter
3.2 “Installing CASIO SDK Files”.
3. Connecting IT-3100 to PC (via ActiveSync/Windows Mobile Device Center)
Connect the IT-3100 to PC via Microsoft’s ActiveSync (for Windows XP or any other OS before
Windows XP) or via Windows Mobile Device Center (for Windows Vista or later). For
connection method, refer to Chapter 5“Connecting the IT-3100 to PC”.
4. Setting Up the Development Environment
Copy all necessary CASIO libraries to the IT-3100.
For detail, refer to Chapter 6“Setting Up the Development Environment”.
5. Installing the Device Emulator
Install the Device Emulator for the IT-3100. For installation method, refer to Chapter 7“Device
Emulator”. If not necessary to install, go to 6 “Application Development” below.
6. Application Development
Now, the application development environment is set up and your development with the
development platform can be started. After application is developed, transfer it to the Device
Emulator or an actual terminal of the IT-3100 via ActiveSync or Windows Mobile Device Center
for check on the operability. For application development method and transferring your
application, refer to Chapter 8“eMbedded Visual C++” and Chapter 9“Visual Studio”.
16

3.2 Installing CASIO SDK Files
Download the CASIO IT-3100 SDK installation CD image file from the following site and write it
to a CD-ROM meadia.
http://www2.casio.co.jp/system_en/pa/PADealer/
(The site requires your user name and password. Enter your user name and password as issued by CASIO.)
Notes:
•If you had already installed IT-3100 SDK Ver. 1.xx, be sure to uninstall it before installing Ver.
2.xx.
•If any file of the IT-3100 SDK Ver. 1.xx is remained in the following folders after uninstalling,
delete it manually.
C:\Program Files\CASIO\MBSYS
C:\Program Files\Windows CE Tools\wce500
•If your PC runs in the Windows Vista or later OS, first you must disable the User Account
Control (“UAC”) by following the process below before installing the CASIO SDK Files.
Case of using Windows Vista and Windows Server 2008
-Navigate to Control Panel →User Accounts →Enable or Disable the User
Account Control. Remove the check on User Account Control (UAC) to protect
your PC, and then click OK button.
Case of using Windows 7
-Navigate to Control Panel →User Accounts →Change User Account Control
Settings. Select Never notify in Choose when to be notified about changed to your
computer setting.
17

Installing ExportSDK
1. When the CASIO IT-3100 SDK CD-ROM is inserted in the drive of your PC, the following
menu screen appears automatically.
Figure 3.1
2. Click Installation List in Figure 3.1. The installation screen appears.
Figure 3.2
3. Click IT-3100 ExportSDK to display the Setup Wizard. Choose any one of the buttons in the
screen.
18

Installing Library
The IT-3100 Library is available for the below development platforms. The library can be installed
for each development platform in the Installation List screen.
-Microsoft eMbedded Visual C++ 4.0
-Microsoft Visual Studio .NET 2003
-Microsoft Visual Studio 2005
-Microsoft Visual Studio 2008
Notes:
1. The Library header file (*.h) and the Import library file (*.lib) are installed in the following
folder.
C:\Program Files\CASIO\MBSYS\include : Header file
C:\Program Files\CASIO\MBSYS\lib\ARMV4I : Import library file
2. The Class library DLL file (*.dll) is installed in the following folder.
C:\Program Files\CASIO\MBSYS\WindowsCE
3. When the Library is installed in PC, the Help file (*.chm) is installed in the following folder.
C:\Program Files\CASIO\MBSYS\HELP
The Help file can be accessed by navigating to Start menu →All Programs →CASIO Basic
Development Kit →Help.
Installing Online Help
Besides the Help file described above, the Online Help is also available for the below development
platforms. The installation of the Online Help is initiated in the Installation List for each
development platform.
-Microsoft Visual Studio .NET 2003
-Microsoft Visual Studio 2005
-Microsoft Visual Studio 2008
After the installation is complete, Microsoft Visual Studio starts up. The Online Help file can be
accessed by navigating to Help →Contents menu.
19

Installing Sample Program
When the Sample is chosen in the Installation List, the sample program folder in the CD-ROM
appears. The Sample program folder is available for each development platform. Copy one of the
folders you wish to use into your PC.
-EVC for Microsoft embedded Visual C++
-VS2003 for Microsoft Visual Studio.NET 2003
-VS2005 for Microsoft Visual Studio 2005
-VS2008 for Microsoft Visual Studio 2008
If your sample program is with "Read-only" attribute set effect. Be sure to disable the attribute
before using it.
20