Casio XJ-L8300HN User manual

1
Projector Wired LAN
Version 3.0
Keep this manual in a safe place future reference.
•PJLink trademark and logo are trademarks applied for registration or are already
registered in Japan, the United tates of America and other countries and areas.
•Crestron Connected is a registered trademark of Crestron Electronics, Inc. of the United
tates.
•AMX is a registered trademark of AMX LLC of the United tates.
•HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
•Other company and product names may be registered product names or trademarks of
their respective owners.
•The contents of this manual are subject to change without notice.
•This manual is published under strict quality control standards. hould you notice any
errors or other problems, please feel free to contact us about them.
•Copying of this manual, either in part or its entirety is forbidden. You are allowed to use
these instructions for your own personal use. Any other use is forbidden without the
permission of CA IO COMPUTER CO., LTD.
•CA IO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims
from third parties arising out of the use of this product or this manual.
•CA IO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to
loss of data due to malfunction or maintenance of this product, or due to any other
reason.
•The sample screens shown in this manual are for illustrative purposes only, and may
not be exactly the same as the screens actually produced by the product.
•Unless specifically stated otherwise, all illustrations in this manual show the
XJ-L8300HN projector.

2
XJ-L8300HN projector (hereinafter referred to collectively as "the Projector" or "this Projector") can
be controlled from an external device via its LAN port.
Connection
Use a LAN cable to connect the Projector to a network device with which you want to establish a
wired LAN connection.
・ Direct connection between the Projector and a network device
For the above type of connection, use a cross type LAN cable.
・ Connection between the Projector and a network device via a router
・
Supported Devices and Standards
Web Browser
This Projector supports control using a computer web browser.
For details about connection, see "Controlling the projector remotely" in your Projector's User's
Guide.
PJLink
This Projector supports the PJLink Class1 standard formulated by the Japan Business Machine
and Information ystem Industries Association (JBMIA).
For detailed information about PJLink, visit the website below.
URL: http://pjlink.jbmia.or.jp/english
•The following shows input switching instruction and input switching query parameters and
their corresponding input sources.

3
Parameter Input ource
11 Computer 1
31 HDMI1
32 HDMI2
51 HDBaseT
•The cover open error and filter error are not supported by the error state query.
•A projector name query returns CA IO.
•A manufacturer name query returns CA IO.
•A device name query returns XJ-L8300HN.
•The password used for the connection authentication process is admin. It is not possible to
change the password or disable the authentication.
For information about the functions of other commands, see the PJLink specifications issued by
JBMIA.
Crestron
This Projector supports Crestron Electronics controller and software (RoomView®) commands.
For detailed information and information about downloading RoomView®, visit the website below.
URL http://www.crestron.com/microsites/get-roomview
When using the Crestron controller, the controller IP address and other settings must be configured
on the Projector. Enter the IP address of this projector in a URL field of a web browser and click
[Tools] on the displayed page to open the Tools page. You can configure the necessary settings at this
page.

4
•IP address pecifies the controller IP address.
•IP ID pecifies the controller IP ID.
•Port pecifies the number of the port being used. (Always 41794)
Enter the applicable information for each item and then click the [ end] button. This will restart
the network function and apply the new settings.
AMX
This Projector supports the AMX controller and Device Discovery. Commands used for control are
PJLink standard commands.
For detailed information, visit the website below.
URL: http://www.amx.com/
Caution
•The Projector can be configured to enable or disable power-on via wired LAN during the
standby state. To do so, use [Network tandby] of the Projector's etup Menu.
Enable Network tandby Mode: When this setting is set to "On", the network standby
function is enabled and you can power on the projector via wired LAN. However, when the
time set in "Auto Disable Network tandby Mode" below has elapsed after entering the
standby state, the network standby function will be invalid. In that case, turn on the power
with the remote control or the projector unit key.
Auto Disable Network tandby Mode：et a period of time from when the projector enters
the standby state until when the network standby function becomes invalid.

NGN170710E-B