Casio XJ-S36 - XGA DLP Projector Instruction and safety manual

1
E
DATA PROJECTOR
XJ-S36/XJ-S46
Data Projector
USB Function Guide
zBe sure to read the precautions in the separate User’s Guide (Basic Operation). For
details about setting up the Data Projector and about lamp replacement, see the
User’s Guide (Basic Operation).
zBe sure to keep all user documentation handy for future reference.
• Microsoft, Windows, Windows Vista, Aero and PowerPoint are registered trademarks or
trademarks of Microsoft Corporation in the United States and other countries.
• Other company and product names may be registered product names or trademarks of
their respective owners.
• The contents of this manual are subject to change without notice.
• Copying of this manual, either in part or its entirety, is forbidden. You are allowed to
use this manual for your own personal use. Any other use is forbidden without the
permission of CASIO COMPUTER CO., LTD.
• CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims
from third parties arising out of the use of this product or this manual.
• CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due
to loss of data due to malfunction or maintenance of this product, or any other reason.
• The sample screens shown in this manual are for illustrative purposes only, and may
differ somewhat from the screens actually produced by the product.

2
Contents
About this manual........................................................... 4
Terms and Conventions ................................................................................. 4
About the Data Projector’s USB Functions .................. 5
Connecting a USB Device to the Data Projector.......... 8
Turning On the Data Projector after Connecting a USB Device .................... 8
Connecting to a USB Device while the Data Projector is On ......................... 9
Changing the Input Source while a USB Device is Connected...................... 9
Installing Data Projector Software............................... 10
Minimum System Requirements .................................................................. 10
To install software ........................................................................................ 11
Projecting Presentation Images from a
USB Memory Device or Memory Card......................... 13
Supported USB Memory Devices.........................................................13
Supported Playback Data Types ..........................................................14
Preparing a Presentation by Saving Image Files to a
Memory Device or Memory Card..........................................................14
Using EZ-Converter PRO............................................................................. 14
Using EZ-Converter PRO Launcher............................................................. 18
Using EZ-Converter 1.1 ............................................................................... 19
EZ-Converter 1.1 Menu and Button Reference ....................................26
Playing a Presentation with Viewer ......................................................27
To connect a USB memory device to the Data Projector............................. 27
Connecting a USB Card Reader to the Data Projector ................................ 28
Drive Menu Operations ................................................................................ 29
File Menu Operations................................................................................... 30
Using the Presentation Menu....................................................................... 35
Operations during Image File Content Projection ........................................ 37
Operations during a Slideshow .................................................................... 38
Slideshow Start Error ................................................................................... 39
Using Viewer to Play a Movie ...................................................................... 39

3
Configuring Viewer Setup Menu Settings .................................................... 41
Viewer Error Messages................................................................................ 45
Viewer Troubleshooting........................................................................46
Performing a Presentation Using the
YC-400/YC-430 Document Camera .............................. 47
YC Camera Application Function and Operation Overview..................47
Connecting the Document Camera to the Data Projector............................ 47
YC Camera Application Operations......................................................50
YC Camera Application Projection Operations ............................................ 50
Configuring YC Camera Application Setup Menu Settings .......................... 55
Projecting the Screen Image of a
Graphing Calculator...................................................... 59
To project the screen image of a graphing calculator .................................. 59

4
About this manual...
This manual explains function and operations when any one of the following devices is
connected to the USB port of the CASIO XJ-S36/XJ-S46 Data Projector.
zUSB memory device or USB card reader
zCASIO Multi Projection Camera (YC-400/YC-430)
zCASIO Graphing Calculator (fx-9860G Series)
Important!
For information about functions and operations when a YW-2 Wireless Adapter is
connected to the Data Projector’s USB port, see page 6 of this manual and the user
documentation on the CD-ROM that comes with the separate YW-2L*Wireless Adapter.
*The YW-2L comes packaged with a YW-2 Wireless Adapter and the Wireless
Connection 2 software for your computer.
Terms and Conventions
In this manual, there are many procedures that require parallel operations on the Data
Projector and your computer. The following are special terms and conventions used in this
manual to differentiate between the Data Projector and computer.
• projection area
This is the entire rectangular area that is projected by the Data Projector. Certain Data
Projector operations will cause messages and menus to appear within the projection
area.
• computer screen
This is the physical display device of your computer.

5
About the Data Projector’s USB Functions
The USB port that is built into the Data Projector lets you connect an external USB
device and use it as an input source for image projection.
USB Memory Device or Memory Card
You can connect a commercially available USB memory device or USB card reader to the
USB port and project images and movies stored on the USB memory device or memory
card.
Refer to the following for details.
For more information about this: Refer to this section of this manual:
Supported USB memory devices “Supported USB Memory Devices” (page 13)
Supported image and movie file formats “Supported Playback Data Types” (page 14)
Saving image data to a USB memory device or
memory card
“Preparing a Presentation by Saving Image
Files to a Memory Device or Memory Card”
(page 14)
Projecting image and movie data from a USB
memory device
“Playing a Presentation with Viewer” (page 27)
XJ-S36/XJ-S46
USB memory device

6
Wireless Adapter (CASIO YW-2)
Establishing a connection between the Data Projector and a computer over a wireless LAN
makes it possible to project the display contents of the computer’s screen from the Data
Projector.
You can have up to four computers connected to the Data Projector over a wireless LAN
at the same time. Use the remote controller that comes with the Data Projector to select
which of the four computer screens you want to project.
Important!
zThe optional YW-2L Wireless Adapter is required in order to perform the above
procedure. The YW-2L package includes a YW-2 wireless adapter for the Data
Projector and Wireless Connection 2 software for establishing a LAN connection
between the Data Projector and a computer.
zFor details about the operation required to establish a wireless LAN connection
between the Data Projector and a computer, see the user documentation on the CD-
ROM that comes with the YW-2L.
XJ-S36/XJ-S46
CASIO YW-2
XJ-S36/XJ-S46

7
Document Camera (CASIO YC-400/YC-430)
You can connect a CASIO Document Camera to the Data Projector’s USB port and project
the images of documents placed on the document stage of the YC-400/YC-430.
For more information, see “Performing a Presentation Using the YC-400/YC-430 Document
Camera” on page 47.
Graphing Calculator (CASIO fx-9860G Series)
You can use USB port to connect the CASIO fx-9860G series graphing calculator to the
Data Projector and project calculator screen images with the projector.
For details, see “Projecting the Screen Image of a Graphing Calculator” (page 59).
XJ-S36/XJ-S46
USB
YC-400/YC-430
XJ-S36/XJ-S46
USB

8
Connecting a USB Device to the Data Projector
What happens when you connect a USB device to the Data Projector depends on the
current configuration of the Data Projector’s plug-and-play setting. Plug-and-play is enabled
under the Data Projector’s initial default settings. For more details about the plug-and-play
setting, see “Setup Menu Contents” in the User’s Guide.
Turning On the Data Projector after Connecting a USB
Device
Normally when you turn on the Data Projector without a USB device connected, the Data
Projector will check the RGB terminal and then the VIDEO terminal for a signal. If it finds
a signal, the Data Projector will select it automatically and project the signal contents.
If you turn the Data Projector on while a USB device is connected to its USB port, it will
perform one of the following operations (depending on its current plug-and-play setting).
When plug-and-play is enabled:
When plug-and-play is disabled:
Turning on the Data Projector with a USB device connected while plug-and-play is disabled
will cause it to perform the same initial operation it performs when no device is connected.
That is, it checks the RGB terminal and then the VIDEO terminal for an input signal. If it
detects an input signal, the Data Projector will select it automatically and project the signal
contents. In this case, however, either Viewer or Wireless will start up in the background,
depending upon the type of USB device that is connected to the Data Projector.
When this type of device is
connected: The Data Projector does this automatically when turned on:
USB memory device or USB
card reader with memory card
loaded
Starts up Viewer (page 27) and projects the Viewer screen.
YW-2 Wireless Adapter Starts up Wireless and projects the Wireless screen.
YC-400/YC-430 Document
Camera
Checks the RGB terminal and then the VIDEO terminal for an
input signal. If it finds a signal, the Data Projector will select it
automatically and project the signal contents. Note that the
Document Camera is not detected automatically.

9
Connecting to a USB Device while the Data Projector is
On
If you connect a USB device to the Data Projector’s USB port while it is turned on, it will
perform one of the following operations (depending on its current plug-and-play setting).
When plug-and-play is enabled:
When plug-and-play is disabled:
In this case, the image that is currently being projected does not change. However, Viewer,
Wireless, or the YC Camera Application will start up in the background, depending upon
the type of USB device that is connected to the Data Projector.
Changing the Input Source while a USB Device is
Connected
On the Data Projector’s remote controller, press the [INPUT] key to change the input
source. Each time you press the [INPUT] key, the Data Projector will check the RGB
terminal, VIDEO terminal, and USB port for an input signal. If it finds a signal, it will
select it as the input source automatically and project its contents.
When this type of device is
connected: The Data Projector does this automatically:
USB memory device or USB
card reader with memory card
loaded
Starts up Viewer (page 27) and projects the Viewer screen.
YW-2 Wireless Adapter Starts up Wireless and projects the Wireless screen.
YC-400/YC-430 Document
Camera
Starts up the YC Camera application (page 47) when the
Document Camera is turned on and projects the YC Camera
application screen.

10
Installing Data Projector Software
Use the procedures in this section to install the software that comes bundled with the
Data Projector onto your computer.
Minimum System Requirements
The following describes minimum computer system requirements to run the bundled
software.
• Operating System: Microsoft®Windows Vista™, Windows®XP, or 2000 Professional
• Computer: IBM PC/AT or compatible that conforms to the following conditions.
• Windows Vista™, Windows®XP, or 2000 Professional pre-installed
• PowerPoint 2000, 2002, 2003, or 2007 installed (to use EZ-Converter 1.1)
• CPU: Pentium III or higher
• Memory: 256MB minimum or amount of memory recommended for operating system
being run
• Hard Disk: At least 40MB for installation or at least 60MB when running
• Display: Full-color display with resolution of at least 800 × 600 that is supported by
above operating systems and the computer being used.
• Input Device: Keyboard or other pointing device (mouse supported above operating
system or equivalent device)
• Normal operation may not be possible under certain hardware configurations.
• Operation is not supported on a computer running Windows®NT, Me, 98SE, 98, 95, or
3.1, or on a Macintosh or Mac OS computer.
• Operation on a computer upgraded to Windows Vista™, Windows®XP, or 2000
Professional from another operating system is not supported.
• Operation is not supported under Windows Vista™ 64-bit version.
• Operation on a computer running Windows®XP Professional x64 Edition is not
supported.
When you want to do this: Install this software:
Convert a PowerPoint file, PDF file, Web page, or other data to an
image file that can be projected from the projector, and store it on a
USB memory device or memory card
EZ-Converter PRO
zConvert PowerPoint files to image files, arrange the sequence of
image files, and store data to a USB memory device or memory
card
zConvert image files to monochrome negatives for projection onto a
blackboard
EZ-Converter 1.1