Castex PX-1100LP Product manual

610201
Rev. 01 (07-00)
PX-1100LP
Carpet And Upholstery Cleaner
Model No.:
610697 –11 gal LP Can.
Extractor
CASTEX
12875 RANSOM STREET
HOLLAND MI 49424 U.S.A.
FAX: [phone]
CUSTOMER SERVICE: 1-800-964-9644
Operator and Parts Manual
Home
Find...
Go To..

PX-1100LP (07-00)2
Please fill out at time of installation for future reference.
Model No.-____________________________________
Install. Date-___________________________________
Serial No.-_____________________________________
OPERATION
This manual is furnished with each new model. It
provides necessary operation and maintenance
instructions and an illustrated parts list.
Read this manual completely and understand the
machine before operating or servicing it.
Use the illustrated Parts Lists to order parts. Before
ordering parts or supplies, be sure to have your
machine model number and serial number handy.
Parts and supplies may be ordered by phone or mail
from any authorized parts and service center,
distributor or from any of the manufacturer’s
subsidiaries.
This machine will provide excellent service. However,
the best results will be obtained at minimum costs if:
•The machine is operated with reasonable care.
•The machine is maintained regularly –per the
maintenance instructions provided.
•The machine is maintained with manufacturer
supplied or equivalent parts.
MACHINE DATA
©2000 Tennant Company Printed in U.S.A.
Castex is a registered United States trademark of Tennant Company
TABLE OF CONTENTS
SAFETY PRECAUTIONS................................ 3
SAFETY LABELS .......................................... 4
MACHINE COMPONENTS.............................. 5
MACHINE SETUP .......................................... 5
MACHINE OPERATION.................................. 6
DRAINING TANKS......................................... 7
FREEZE PROTECTION................................... 7
MACHINE MAINTENANCE.............................. 8
STORING MACHINE...................................... 8
RECOMMENDED STOCK ITEMS.................... 8
TROUBLE SHOOTING................................... 9
SPECIFICATIONS ......................................... 10
ELECTRICAL DIAGRAM ................................ 11
PARTS LIST ................................................. 12
OPTIONS...................................................... 17
Home
Find...
Go To..

PX-1100LP (07-00) 3
OPERATION
SAFETY PRECAUTIONS
This machine is intended for commercial use. It is
designed to clean carpet and upholstery in a indoor
environment and is not constructed for any other use.
Use only recommended cleaning solutions and
accessory tools.
All operators must read, understand and practice the
following safety precautions.
The following safety alert symbols are used throughout
this manual as indicated in their description:
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially dangerous
conditions to the operator or equipment.
FOR SAFETY:
1. Do not operate machine:
–Unless trained and authorized.
–Unless operator manual is read and
understood.
–In flammable or explosive areas.
–With damaged cord or plug.
–If not in proper operating condition.
–Unless cord is properly grounded.
–In outdoor areas.
–In standing water.
–With the used of an extension cord.
2. Before operating machine:
–Make sure all safety devices are in place
and operate properly.
3. When using machine:
–Do not run machine over cord.
–Do not pull machine by plug or cord.
–Do not pull cord around sharp edges or
corners.
–Do not unplug by pulling on cord.
–Do not stretch cord.
–Do not handle plugs with wet hands.
–Keep cord away from heated surfaces.
–Report machine damage or faulty operation
immediately.
–Following mixing and handling instructions
on chemical containers.
4. Before leaving or servicing machine:
–Turn off machine.
–Unplug cord from wall outlet.
5. When servicing machine:
–Unplug cord from wall outlet.
–Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
–Use manufacturer supplied or approved
replacement parts.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Always unplug machine
before servicing.
WARNING: Flammable materials can cause
an explosion or fire. Do not use flammable
materials in tank(s).
WARNING: Flammable materials or reactive
metals can cause an explosion or fire. Do not pick
up.
GROUNDING INSTRUCTIONS
Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine is
equipped with a cord having an equipment-
grounding connector and grounding plug. The
plug must be plugged into an appropriate outlet
that is properly installed in accordance with all
local codes and ordinances. Do not remove
ground pin; if missing, replace plug before use.
GROUNDED OUTLET
(3 HOLE)
GROUNDING
PIN
Home
Find...
Go To..

PX-1100LP (07-00)4
OPERATION
SAFETY LABELS
The safety labels appear on the machine in the locations indicated. Replace labels if they become damaged or
illegible.
FOR SAFETY:
Read manual
before operating
machine.
FOR SAFETY LABEL-
Located on rear panel.
FLAMMABLE MATERIALS/
SPILLS LABEL-Located on
rear panel.
WARNING: Flammable materials
can cause explosion or fire. Do
not use flammable materials in
tank(s). Flammable materials or
reactive metals can cause
explosion or fire. Do not pick up.
HAZARDOUS VOLTAGE
LABEL-Located on rear
panel.
WARNING: Hazardous Voltage.
Shock or electrocution can
result. Always unplug machine
before servicing.
Home
Find...
Go To..

PX-1100LP (07-00) 5
OPERATION
MACHINE COMPONENTS
1. Recovery Tank
2. Solution Tank
3. Recovery Tank Lid
4. Solution Tank Lid
5. Vacuum Switch
6. Pump Switch
7. Power Cord Connect
8. Empty-Out Nozzle
9. Vacuum Hose Connector
10. Recovery Tank Drain
11. Latches
12. Push/Pull Handle
13. Solution Hose Connector
14. 254 mm (10”) Wheels, non-marking
MACHINE SETUP
1. Carefully check carton for signs of damage.
Report damages at once to carrier. The machine
is shipped fully assembled and is ready for use.
2. Connect hoses and tool to be used (Figure 1).
3. Using a clean bucket or hose, fill solution tank
with 41 liters (11 gallons) of hot water, 60°C
(140°F) maximum (Figure 2).
WARNING: Flammable materials can cause an
explosion or fire. Do not use flammable materials
in tank(s).
4. Add a recommended cleaning chemical.
FOR SAFETY: When using machine, follow
mixing and handling instructions on chemical
containers.
Fig. 1
Fig. 2
1
3
4
2
11
12
14
5
6
7
8
9
10
13
Home
Find...
Go To..

PX-1100LP (07-00)6
OPERATION
ATTENTION: If using powdered cleaning
chemicals, mix prior to adding.
NOTE: If desired, water alone achieves excellent
cleaning results.
5. Plug machine’s power cord into a grounded wall
outlet (Figure 3).
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
FOR SAFETY: Do not operate machine with the
use of an extension cord.
6. Secure recovery tank lid in place.
MACHINE OPERATION
FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
PRE-OPERATION
1. Vacuum carpet and remove other debris.
2. Inspect power cord for damage.
CLEANING CARPETS
1. Activate vacuum and pump switches (Figure 4).
2. Take carpet cleaning wand in hand and squeeze
valve trigger while moving the tool in short
forward and backward strokes over the carpet
(Figure 5).
WHILE OPERATING
1. Overlap each path by 50 mm (2 in).
Warning: Flammable materials or reactive
metals can cause an explosion or fire. Do not
pick up.
2. Periodically check for excessive foam buildup in
recovery tank. Use a recommended foam control
solution to prevent vacuum motor damage.
ATTENTION: Excessive foam buildup will not
activate the float shut-off screen.
3. To clean heavily soiled areas, repeat cleaning
path from a different direction.
4. Empty recovery tank every time water is added to
solution tank.
CLEANING WITH ACCESSORY TOOLS
1. Connect accessory tool hoses to the couplers at
the end of the hoses already attached to the
machine (Figure 6).
GROUNDED OUTLET
(3 hole)
GROUNDING
PIN
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Home
Find...
Go To..

PX-1100LP (07-00) 7
OPERATION
2. Operate accessory tool as normal (Figure 7).
NOTE: Before cleaning upholstery, always check
cleaning instructions sewn in furniture by
manufacturer.
3. After cleaning, relieve water pressure from tool
before disconnecting hose. Squeeze trigger for
five seconds after turning switches off.
DRAINING TANKS
DRAINING RECOVERY TANK
1. Turn machine off and unplug power cord.
2. Insert supplied 45°elbow in drain valve. Place a
bucket below it and slowly pull up on the handle
(Figure 8).
3. Rinse tank with clean water at the end of the day.
DRAINING SOLUTION TANK
1. Remove empty-out nozzle from its storage
bracket (Figure 9) and attach to end of solution
hose.
2. Place empty-out nozzle over a bucket and turn on
pump until all the solution has been pumped from
solution tank.
3. Replace empty-out nozzle to its storage location.
FREEZE PROTECTION
1. After draining solution tank as described in steps
one and two in the previous section (DRAINING
SOLUTION TANK), place empty-out nozzle in
end of vacuum hose and seal with hand
(Figure 10).
2. Turn on vacuum and pump for 15 seconds. This
will fill the pump and hoses with air and prevent
freezing.
3. Replace empty-out nozzle to its storage place.
FIG. 7
FIG. 8
FIG 9
FIG. 10
Home
Find...
Go To..

PX-1100LP (07-00)8
OPERATION
MACHINE MAINTENANCE
To keep machine in good working condition, simply
follow machine’s daily, weekly and monthly
maintenance procedures.
FOR SAFETY: When servicing machine, unplug
cord from wall outlet.
DAILY MAINTENANCE
(Every 4 Hours of Operation)
1. Empty and rinse out recovery tank thoroughly.
2. Remove float shut-off screen from recovery tank
and clean (Figure 11).
3. When solution tank is empty, remove and clean
solution filter screen located in the bottom of the
solution tank.
4. Wipe off power cord and check for damage,
replace if necessary. Coil cord neatly after use.
5. Clean machine with an all purpose cleaner and
damp cloth.
WEEKLY MAINTENANCE
(Every 20 Hours of Operation)
1. Inspect vacuum hoses for holes and loose cuffs.
2. Inspect spray pattern for plugging. If plugged,
remove spray tips and soak them in acetic acid
solution for up to six hours. Do not use pointed
objects to unplug tips, damage will occur.
FOR SAFETY: When using machine, follow mixing
and handling instructions on chemical containers.
3. Inspect cord and cord grip for damage. Replace
immediately if damaged.
4. Lubricate metal shaft on recovery tank drain with
water resistant oil.
5. Lubricate female hose couplers with lightweight
oil.
MONTHLY MAINTENANCE
(Every 80 Hours of Operation)
1. Lubricate wheels with water resistant oil.
2. Inspect machine for water leaks and loose
hardware.
QUARTERLY MAINTENANCE
(Every 250 hours of Operation)
Check vacuum motor for carbon brush wear. Replace
brushes or motor if worn to a length of 10mm (0.38”)
or less.
STORING MACHINE
1. Before storing machine, be certain to drain and
rinse tanks of all water.
2. Store machine in a dry area in the upright position.
3. Unscrew recovery tank lid to promote air
circulation.
ATTENTION: Do not expose to rain. Store
indoors.
ATTENTION: If storing machine in freezing
temperatures, be sure that machine and solution
system are completely drained and dry.
RECOMMENDED STOCK ITEMS
Refer to Parts List section for recommended stock
items. Stock items are clearly identified with a bullet
preceding the parts description. See example below:
REF PART # DESCRIPTION QTY.
1610470 NUT 1/4-20 NYLOK ZINK 3
2610471 WASHER 1/4 FLAT CP 6
3610579 •BLOWER 3STG 120V 5.7 COMP 1
4610487 GASKET BLOWER/ARLON 1/4" 1
FIG. 11
Home
Find...
Go To..

PX-1100LP (07-00) 9
OPERATION
TROUBLE SHOOTING
PROBLEM CAUSE SOLUTION
Faulty switches or wiring. Contact Service Center.
Faulty power cord. Contact Service Center.
Machine does not operate.
Building circuit breaker tripped. Reset Breaker.
Faulty switch or wiring. Contact Service Center.
Faulty solution pump motor. Contact Service Center.
Faulty pump head. Contact Service Center.
Trigger on wand not pulled. Pull Solution Trigger.
Solution pump does not operate.
Quick couplers not fully engaged. Connect quick couplers.
Loose or broken wiring. Contact Service Center.
Faulty vacuum switch. Contact Service Center.
Defective vacuum motor. Contact Service Center.
Vacuum motor does not
operate.
Worn carbon brushes. Contact Service Center.
Recovery tank drain valve open. Close valve.
Defective recovery tank lid gasket. Replace gasket.
Clogged float shut-off screen. Remove recovery tank lid and clean
screen.
Loose vacuum hose connections. Secure cuffs to hose.
Poor solution pick-up.
Defective vacuum hose. Replace hose.
Plugged spray tips. Clean or replace tips.
Improper spray tip size or spray angle. Replace with proper tips.
Worn spray tips. Replace spray tips.
Solution tank low or empty. Refill solution tank.
Uneven or no spray.
Faulty solution pump. Contact Service Center.
Home
Find...
Go To..

PX-1100LP (07-00)10
OPERATION
SPECIFICATIONS
MACHINE DIMENSIONS
Model PX-1100LP
LENGTH 711 mm (28 in)
WIDTH 450 mm (17.7 in)
HEIGHT 959 mm (37.8 in)
WEIGHT 44.5 Kg (98lbs)
SOLUTION TANK CAPACITY 41 L (11 gal)
RECOVERY TANK CAPACITY 38L (10 gal)
SOLUTION PUMP 120 V, 6.8 bar (100psi), 1.0A
VACUUM MOTOR 120 V, 12.6A, 1512 W
SEALED WATER LIFT 3353 mm (132 in)
TOTAL POWER CONSUMPTION 120v, 13.6 A, 1632 W
POWER CORD 7.6m (25 ft) 3/12
DECIBEL RATING 3 METERS (10 FT) FROM
MACHINE ON CARPET <75 db(A)
902 mm
(35.5 in)
450 mm
(17.7 in)
711 mm
(28 in)
959 mm
(37.8 in)
Home
Find...
Go To..

PX-1100LP (07-00) 11
ELECTRICAL DIAGRAM
120 V WIRING DIAGRAM
Home
Find...
Go To..

PX-1100LP (07-00)12
PARTS LIST
TANK GROUP
Home
Find...
Go To..

PX-1100LP (07-00) 13
PARTS LIST
TANK GROUP
REF PART # DESCRIPTION QTY.
1610527 PNL EDGE PROF 100 BLANK 1
2610538 NOZZEL EMPTY OUT MALE 1
3610480 BUSHING HOLDER EMPTY-OUT 1
4610462 10-32 X 1 1/2 PHXZINC 2
5610475 3/8-16 X 4 HEX ZINC 1
6610476 WASHER 3/8 FLAT ZINC 3
7610474 3/8-16 X 3 1/2 HEX ZINC 1
8610519 BRACKET SF-09 HOLDER EDGE 1
9610539 •VALVE DUMP 1.5 W/PVC EXT 1
10 610576 HANDLE CASTEX EDGE2 2 SWIT 1
11 610183 DECAL CASTEX PX-1100LP 2
12 610463 NUT 10-32 HEX ZINC 2
13 610458 10-32 X 7/16 PHXSS 1
14 610522 PLATE HANDLE SW COVR EDGE 1
15 610457 10-32 X 5/16 PHXSS 6
16 610537 •HOSE 2" VINYL X 2.25" 1
17 610484 CLAMP HOSE 2 1/4 # 32 2
18 610473 3/8-16 X 1 1/2 HEX ZINC 2
19 610520 BRACKET DUMP VAL MNT EDGE 1
20 610491 PLUG HOLE NYLON .562 3
21 610515 •SWITCH SPST WATER RESIS 2
22 610460 10-32 X5/8 PHXSS 7
23 610482 CLAMP HOSE 1/4 #4 1
24 610563 TIE WIRE NYLON #10 SCREW 1
25 610512 NUT NYLON BUSHING REL 1/2 1
26 610511 BUSHING RELIEF 1/2 NPT 1
27 610578 •HARNESS EDGE HANDLE C1PV 1
28 610546 •CORD PIG TAIL EDGE COMP 1
29 610507 •LID DOME EDGE 1
30 610488 •GASKET DOME LID 1
31 610540 FLANGE ASM-DOME LID GLUE 1
32 610464 NUT 10-32 SS NYLOCK 6
REF PART# DESCRIPTION QTY.
33 610483 CLAMP HOSE 2" # 24 1
34 610534 •HOSE VAC 1.5" FLEX 31" 1
35 610530 HOSE BARB ABS 1 1/2 CUT 1
36 610494 O-RING 1.76 X .187 2
37 610294 NECK, VAC FLTR EDGE 2 ROTO 1
38 610555 NUT 1/4-20 NYLOK SS 2
39 610556 WASHER 1/4 FLAT SS 4
40 610493 •FLOAT VAC SHUT OFF ROTO 1
41 610564 DEFLECTOR VAC INLET EDG2 1
42 610461 10-32 X 3/4 PHXSS 2
43 610558 HOSE BARB 1 1/2XMPT W/FLA 1
44 610296 ELBOW 90 ASSEMBLY EDGE 2 1
45 610575 VACUUM TANK EDGE 2 CASTEX 1
46 610557 CLAMP HOSE 1 3/4 #20 2
47 610566 HINDGE SOLUTION LID EDGE 1
48 610561 LID SOLUTION EDGE2 CASTEX 1
49 610486 •FILTER 1/4 NPT 50 MESH 1
50 610502 NIPPLE 1/4 NPT CLOSE BR 1
51 610568 BULK HEAD 1/4" BRASS W/O-RING 1
52 610506 O-RING VITON 2-020 BLKHD 1
53 610453 8-32 X 1/2 PHXSS 4
54 610490 LATCH SOFT DRAW BLACK 2
55 610478 WASHER 3/4 FLAT BLKHD CP 1
56 610479 NUT BULKHEAD 3/4-16 X .225 2
57 610500 ELBOW 90 1/4NPT-4 SAE 1
58 610574 SOLUTION TANK EDGE 2 CASTEX 1
59 610510 CORD 25' 12/3SJT UG W/LCK 1
60 578729 DECAL READ MANUAL 1
61 630420 DECAL FLAMMMABLE MAT'L 1
62 610185 DECAL HAZARD UNPLUG 1
63 610553 1/4-20 X 1 HEX HD SS 2
•RECOMMENDED STOCK ITEMS
Home
Find...
Go To..

PX-1100LP (07-00)14
PARTS LIST
BASE GROUP
Home
Find...
Go To..

PX-1100LP (07-00) 15
PARTS LIST
BASE GROUP
REF PART # DESCRIPTION QTY.
1610470 NUT 1/4-20 NYLOK ZINK 3
2610471 WASHER 1/4 FLAT CP 6
3610579 •BLOWER 3STG 120V 5.7 COMP 1
4610487 •GASKET BLOWER/ARLON 1/4" 1
5610567 STAND-OFF 5.7 EDGE 3.190 3
6610554 1/4-20 X 4 1/2 HEX CP 3
7610484 CLAMP HOSE 2 1/4 # 32 1
8610535 •HOSE 2" FLEX EXHAUST 10" 1
9610570 HOSE 1/4NPTX-6SAEVL 25" L 1
10 610465 NUT 10-32 NYLOK ZINC 4
11 610550 •PUMP SH FL 100PSI120V PLG 1
12 610501 ELBOW 90 3.8 NPT X-6 SAE 1
13 610571 HOSE 3/8NPT X-4SAEFMLSVL 1
14 610565 PLATE VAC MNT 1 VAC NO QUI 1
15 610504 CUFF 1 1/2SLIP X 1 1/4HO 1
16 610460 10-32 X 5/8 PHXSS 3
17 610457 10-32 X5/16 PHXSS 1
18 610489 GASKET VAC SEAL EDGE BASE 1
19 610526 SPACER QUICK CONNECT 1
20 610456 NUT 8-32 NYLOK, ZINC 4
REF PART # DESCRIPTION QTY.
21 610505 Q/C 1/4" PLUG BR SHUT OFF 1
22 610451 6-32 X 1/2 PHXSS 2
23 610514 CLAMP NYLON CABLE 1/4" 2
24 610452 NUT 6-32 HEX SS 2
25 610577 •HARNESS BASE EDGE C1PV 1
26 610454 8-32 X 3/4 PHX ZINC 4
27 610481 •CASTER 3 1/2 2
28 610521 PIVOT TUBE EDGE 3.400" 2
29 610293 VELCRO ONE WRAP STRAP 1/2 X12 1
30 610517 AXIL ROD 1/2 EDGE ECONO 1
31 610485 COTTER HAIRPIN 7/16-9/16 2
32 610466 1/4-20 X 3/4 HEX HD CP 8
33 610572 BASE,CASTEX DRILLED, 1 VAC 1
34 610518 AXIL ROD 1/2 EDGE 1
35 610477 WASHER 9/16 X 1 1/4 FLAT 4
36 610492 •WHEEL 10"-1/2BORE 2
37 610495 PUSHNUT FASTNER 1/2 CAP 2
38 610463 NUT 10-32 HEX ZINC 3
39 610295 WASHER .219 X .625 18 GA 4
•RECOMMENDED STOCK ITEMS
Home
Find...
Go To..

PX-1100LP (07-00)16
PARTS LIST
PUMP 100 PSI BREAKDOWN
REF# PART # DESCRIPTION QTY.
1610550 •PUMP SH FL 100 PSI 120V PLG 1
2610767 PUMP HEAD 100 PSI COMP ASM 1
3610768 •SWITCH ASM, 100 PSI SH FL 1
4610769 •CHECK VALVE ASM, 100 PSI SH FL 1
5610770 HEAD, PUMP DIAPHRAGM 1
6610771 •VALVE ASM, BYPASS SH FL 1
7610772 DIAPHRAGM, SOLID DRIVE ASM 1
8610773 MOTOR, 100 PSI 120V SH FL PLG 1
•RECOMMENDED STOCK ITEMS
1
27
8
3
4
5
6
Home
Find...
Go To..

PX-1100LP (07-00) 17
OPTIONS
FLOOR TOOL
REF#
PART # DESCRIPTION QTY.
610642 WAND & HOSE KIT LP-PX 1
610710 WAND, FLOORTOOL LP-PX COMP. 1
1610624 GRIP, FLRTOOL 1 1/2 X 6 1
2610465 NUT, 10-32 NYLOK ZINK 2
3610628 HOE HANDLE,ECONO FLRTL 1
4610622 5/16-18 X 3/4 HEX CP 2
5610631 TRIGGER,COMP KNGSTN VALVE 1
6610625 45 ST ELBOW 1/4 NPT 1
7610502 NIPPLE, 1/4 NPT CLOSE BR 1
8610505 Q/C 1/4" PLUG BR SHUT OFF 1
9610621 10-32 X 1 3/8 PHX ZINC 1
10 610620 10-32 X 3/4 PHXZINC 1
REF# PART # DESCRIPTION QTY.
11 610626 VALVE, KNGSTN STD S BND 1
12 610630 WAND,FLOORTOOL 1
13 610629 "U"CLAMP,SUPP HOE HNDL EC 1
14 610623 NUT 5/16-18 NYLOCK, ZINC 2
15 610632 HOSE,1/4 SOL 47"FLRTL ECO 1
16 610627 JET, 11006 E VEE BRASS 1
17 610637 HOSE, 1/4 SOL 25' NPT NO/QC 1
18 610638 Q/C 1/4" SOC BR SHUT OFF 2
19 610636 HOSE, 1/4 SOL 25' W/QCEDGE 1
20 610634 HOSE, VAC 1 1/2 GREY 25' 1
21 610633 CUFF, 1 1/2 SLIP 1 1/2 HOSE 2
22 610635 HOSE, VAC 1 1/2X25'W/1.5 CUFF 1
•RECOMMENDED STOCK ITEMS
Home
Find...
Go To..

PX-1100LP (07-00)18
OPTIONS
HAND TOOL
REF PART # DESCRIPTION QTY.
610298 TOOL, UPHOLSTERY LP-PX
1610668 TOOL, HAND LP BRASS JET W/VLV & TRIG 1
1608891 TOOL, HAND W/O TRIGGER 1
2610654 6-32 X 1 PHXZINC 2
3610655 NUT, 6-32 HEX ZINC NYLOK 2
4610665 VALVE & TRIGGER ASM. COMP LP 1
5608897 CAP, SPRAY TIP HAND TOOL 1
6610666 JET, 110015 E TEE BRASS 1
7608900 SCREEN, HAND TOOL 1
8608895 NOZZLE, SPRAY HAND TOOL 1
9608894 BODY, VALVE HAND TOOL 1
REF PART # DESCRIPTION QTY.
10 608898 TRIGGER, HAND TOOL 1
11 610658 4-40 X 7/8 PHXZINC 1
12 610659 NUT, 4-40 HEX ZINC NYLOK 1
13 608892 SEAL, SOLUTION HOSE 1
14 610667 HOSE TYGON 16.5" ASM W/ EXTRN CUFF 1
15 610661 ASM, 1 1/4" VAC GREY 12" W/ 1 1/4 CUFF 1
16 610662 HOSE, 1 1/4" VAC GREY LOOP 12"LONG 1
17 610669 CUFF, HOSE 1.5 X 1.25 GREY 1
18 610663 COUPLER, 1.5" VAC HOSE ALUM 1
19 610664 BUSHING 1/4 X 1/8 NPT BR 1
20 610505 Q/C 1/4" PLUG BR SHUT OFF 1
Home
Find...
Go To..