Casual Home Lincoln User manual

Assembly Instructions
Item# 615-7X
Lincoln Nightstand with Concealed Compartment
1/8

x 1
x 2
x 16
x 8 x 2
x 2
x 2
RF10052
Large Screw
RF10019
Small Screw
RF40015
Allen Key
A
Top Table
1 pc.
B
Left Panel
1 pc.
C
Right Panel
1 pc.
D
Shelf
1 pc.
E
Top Shelf
1 pc.
Part List
Magnet
x 1
G
Back Panel
1 pc.
F
Bottom Frame
1 pc.
K
Drawer Front
2 pcs.
L
Drawer Left
2 pcs.
M
Drawer Right
2 pcs.
N
Drawer Back
2 pcs.
O
Drawer Plate
2 pcs.
H
Front Crossbar
1 pc.
I
Back Crossbar
2 pcs.
J
Bottom End
1 pc.
Hardware
2/8
RF40140
Metal Handle
Anti-Tipping
RF10080
Screw P6 x 5/8”
RF10103
Screw P6 x 1 1/4”
RF40214
Metal Plate

E
D
I
I
EH
J
C
FD
3/8
Diagram 1.
Diagram 2.
Front
Back
Front
Back
Step 1:
Place the Right Panel (C) onto a soft surface. Attach Shelf (D), Top Shelf (E)
and Bottom Frame (F) into Right Panel (C) by using Large screws (RF10052)
as per diagram 1.
Step 2:
Put the Back Crossbars (I), Front Crossbar (H) and Bottom End (J)
into the unit as per diagram 2.
x 4
RF10052

G
B
4/8
Diagram 3.
Front
Back
Front
Back
Diagram 4.
Step 3:
Insert the Back Panel (G) into grooves as per diagram 3.
Step 4:
Attach Left Panel (B) into the unit
by using screws (RF10052) as per diagram 4.
x 4
RF10052

N
O
L
M
K
x 8
RF10019
x 1
Drawer
Diagram 5.
5/8
Step 5: Assemble the Drawers.
Attach the Front (K), Left (L), Right (M), Back (N) and plate (O) together by using screws
(RF10019). Then, attach
Handle (RF40140) into the Front (K) of drawer as per diagram 5.
RF40140
Diagram 6.
Step 6:
Place the drawers into the position
as per diagram 6.

6/8
Step 7:
Install the Top Table (A) into the unit. Alignment
the sliding rail into the same straight line of the rail,
sliding as per diagram 7.
The Unit Completed
Diagram 7.
Sliding Rail
Rail
A

7/8
Diagram 8.
Diagram 9. Diagram 10.
WARNING. The hidden compartment is NOT a security safe. The inner contents in the hidden
compartment are the sole responsibility of the user and are to be stored at the user's discretion.
Regardless of loss, seizure, damage, or changes in condition to the inner contents of the hidden
compartment, the manufacturer is not liable for the contents stored in the hidden compartment.
The hidden compartment is built in,
shipped with the locking bolt (if installed),
and is disengaged and unlocked.
In order to engage the hidden compartment lock,
please remove the sticker which blocks the bolt
(see the diagram 8).
How to use the concealed compartment
Sticker
Unlock and Open: place the magnetic key
onto the assigned position shown above
to unlock and pull out the drawer as per
diagram 9.
Close and Lock: close the drawer
and remove the magnetic key from the
assigned position to lock the drawer
as per diagram 10.
This logo identies the designated position.
Place the magnetic key on top of the mark
to unlock the concealed drawer.

8/8
Use metal plate (RF40214) and
screws P6 x 5/8”(RF10080)
to attach two side panels through the studs
into the wall, using screws P6 x 1 1/4”
(RF10103) as per diagram 11.
Anti-Tipping
Wall
Diagram 11.
RF10080
Screw P6 x 5/8”
RF10103
Screw P6 x 1 1/4”
RF40214
Metal Plate
RF40214
Metal Plate