Casual Living AQUA CHAIR User manual

AQUA 5PC MOTION
DINING SET - SWIVEL CHAIR
ASSEMBLY INSTRUCTION
If you have any problems with this product, DO NOT RETURN IT TO THE STORE. CALL OUR
CUSTOMER SERVICE HOT-LINE at
[phone]
8am-5pm (EST), Monday-Thursday, 8am-4pm(EST), Friday

WARRANTY
THIS IS A RESIDENTIAL WARRANTY AND DOES NOT APPLY FOR COMMERCIAL USE.
NOTE: Do not allow children to play with plastic wraps or small parts to prevent potential choking
hazard.
For more information, visit www.bjsoutdoor.com. There you can review our full warranty details and other
helpful information. Or, you may call us at [phone], Monday – Thursday, 8am - 5pm (EST), Friday,
8am – 4pm (EST).

P
ar
t
s
Li
s
t
PART PICTURE DESCRIPTION QTY
ASeating frame 1
BRocker Base 1
CStem Bracket 1
DM8 Nut 4
E
Hex bolt
M8x25mm
4
FSpring Washer 4
GM8 Bolt Cover 4
HM8 Open Wrench 2
ILumbar Pillow 1
JSeat Cushion 1

Assembly Steps:
Check all
p
arts a
g
ainst
p
arts list
Figure 1
Step 1.Attach Stem Bracket (C) with Seating frame(A), using Hex Bolt M8x25mm (E), Spring Washer(F)
and M8 Nut (D). Finally, tighten M8 nuts with M8 Open Wrench (H).Cover all bolt heads with M8 Bolt Cover
(G).
NOTE: When assembling, please make sure the Red arrow stickers on Stem Bracket (C) and Seating frame
bottom are in the same direction.
Figure 2
G
A
B
D
F
E
A
C
Step 2.Insert the chair bucket stem into Bottom Base (B) completely.
NOTE: Please make sure the chair bucket stem is fully in erted into base.
s

Figure 3
Step 3.Put the Seat Cushion(J), Lumbar Pillow (I), on the assembled chair.
Now your chair is ready to use!
I
J