
Telephone Helpline: 0845 146 2887 UK
Before Use
Carefully unpack your coffee grinder and remove all packing materials. To remove any dust that
may have accumulated during packaging, wipe the grinding bowl, blades with a damp lint-free
cloth or sponge. Use extreme care as the blades are sharp. The transparent cover can be
immersed in water for cleaning, dry thoroughly.
Caution: Never immerse the motor base in water for cleaning and do not fill the grinding
bowl with water for cleaning.
Operation
1. Place the grinder on a flat surface.
2. Assemble the grinding bowl into the motor base, and then turn the bowl clockwise until a
click sound is heard. When disassembling, turn the bowl anti-clockwise to detach it.
3. Pour dry spices or coffee beans into the grinding bowl, it must be noted the quantity of
should not exceed 60g.
4. Attach the transparent cover and plug into the power outlet.
5. Press and hold the power switch, the appliance will start operating. Release the power
switch, the appliance will stop operating.
NOTE: Do not operate this appliance continuously for more than 30 seconds, allow
appliance to cool down for 3 minute between two continuous cycles.
6. View the consistency of ground product through the transparent cover.
IMPORTANT: If you want to remove the cover to check the consistency of the coffee
grounds. It must be noted never remove the cover until blades come to a complete
stop.
7. Once the desired grind is obtained, release power switch and unplug the power cord from
the outlet.