Catler SB 810 User manual

STICK BLENDER WITH
VACUUM ATTACHMENT
SB 810
Instructions for use
STICK BLENDER
WITH VACUUM ATTACHMENT

STICK BLENDER
WITH VACUUM
ATTACHMENT

3
TABLE OF CONTENTS
TABLE OF CONTENTS
4 Catler recommends safety rst
8 Know your SB 810 blender
10 Assembly and disassembly of your SB 810 blender
18 Operating your SB 810 blender
21 Care and cleaning
23 Troubleshooting

4CATLER RECOMMENDS SAFETY FIRST
CATLER RECOMMENDS SAFETY FIRST
We understand the importance of safety and that’swhy we put your safety first from the
initial design concept to the production itself. Nevertheless, please be careful and follow the
instructions below when using this appliance.
• This appliance is not to be used by children.
Keep this appliance and its power cord out of
children.
• The appliances may be used by persons with
physical, sensory or mental impairments or by
inexperienced persons only if they are properly
supervised or have been informed about how
to use of the product in asafe manner and
understand the potential dangers.
• Children must not play with the appliance.
• Cleaning and maintenance performed by the
user must not be performed by children.
• If the power cord is damaged, ask the
authorised service for areplacement in order
to prevent hazards. It is forbidden to use the
appliance with the power cord damaged.
• Incorrect use may lead to the risk of injury.
• Please pay special attention when handling
the cutting blades, especially when removing
the blades from the container, emptying the
container and during cleaning.

5
CATLER RECOMMENDS SAFETY FIRST
• Wash the blender parts that came into contact
with food in warm water with asmall amount
of washing-up liquid. Rinse and wipe dry.
• Always disconnect the appliance from the
power socket if you are leaving it unattended
and before assembly, disassembly or cleaning.
• Before replacing the accessories or accessible
movable parts, please turn the appliance off
and disconnect it from the power supply.
• Before using the appliance for the rst time, please remove all packaging and ad stickers
and discard them in an environmentally safe manner. Check the appliance for any defects.
Under no circumstances should you use adamaged appliance or an appliance with
adamaged power cord etc.
• Before operating your appliance, read all the instructions carefully and store them in asafe
place for possible future reference.
• To eliminate the risk of small children suocating, remove the protective cover of the
power plug from this appliance and dispose of it safely.
• Before connecting this appliance to apower socket, make sure the voltage stated on the
product'srating label corresponds to the voltage in your power socket.
• Do not disconnect the appliance from the power socket by pulling the power cord. This
could damage the power cord or the power socket. Disconnect the cord from the power
socket by pulling the plug.
• Do not connect or disconnect the appliance power cord to or from the power socket with
wet hands.
• Keep the power cord dry. Never use the appliance in the near vicinity of abath, shower or
swimming pool.
• To prevent possible electric shock, do not expose the appliance or its power cord to
dripping or splashing water, or immerse it in water or other liquids.
• Before connecting your appliance to apower outlet and turning it on, make sure
it’sfully and correctly assembled. This is especially true for removable blades of the stick
attachment. Always make sure that the blade is properly attached to the stick attachment
and the nut is tightened. Follow the instructions provided in this user'smanual. Do not use
the appliance if the blade is loose or incorrectly tted. There is aserious risk of loosening
the blade, damaging the appliance and causing serious injuries.
• Do not use the appliance if it is not working correctly, if it has been damaged or has been
submerged in water.
• Always switch o the appliance and unplug it after use.

6CATLER RECOMMENDS SAFETY FIRST
• This appliance is designed for use in households, oces and similar types of areas.
Do not use it in an industrial environment, outdoors or in rooms with high humidity, such
as laundry or bathrooms.
• Do not use the appliance for purposes other than those for which it was designed.
• Only use the appliance with original accessories from the manufacturer. Never use
accessories, which have not been supplied with this appliance or which have not been
explicitly recommended by the manufacturer.
• Do not operate your blender continuously with large batches for longer than 1 minute.
Allow the motor to rest for at least 3 minute between each use. Always observe the
maximum level line when lling.
• Do not blend carbonated drinks and they may run high.
• If the food gets stuck around the blade unit, release the switch and wait until the blade
unit has come to acomplete stop. Then, unplug the power cord from the socket and
use aspoon or aspatula to remove the food from the knife unit. Never use your ngers
because the knives are very sharp.
• Keep your hands, ngers, garments, spoons and other kitchenware out of the appliance
during operation. Always turn the appliance o and unplug the power cord from the
socket and wait until the blades have stopped. Avoid contact with moving parts.
• Do not remove accessories from the motor unit during operation.
• Use your blender only for making food and/or drinks. Do not turn on the blender when
empty.
• Do not process hot or boiling liquids. Allow them to cool before processing.
• Do not expose any parts or accessories to extreme temperatures.
• Use the air extraction attachment for amaximum of 1 minute. In the case of continuous
operation, follow only the instructions described in this manual.
• The mayonnaise preparation attachment is exclusively intended for making mayonnaise.
Do not use it for any other purposes than those for which it was designed.
• Do not expose the appliance to direct sunlight or place it near naked ames or appliances
that generate heat, such as electric and gas cookers.
• Only place the appliance on aclean, dry, at and stable surface. Do not place the
appliance on the edge of akitchen worktop or table top or use it on the sink drip tray.
Also, do not place the appliance on window sills.
• Apower outlet must be easily accessible for possible sudden disconnection.
• Do not use this appliance with aprogrammable switch, timer switch or any other device
that automatically switches the appliance on.
• Do not place any objects on the appliance. Do not climb or sit on it.
• Protect the appliance and accessories from falling to the ground or on atable, even from
asmall height, and from objects falling on them.
• Do not handle the appliance while it’sin operation.
• Keep children and pets away when the appliance is in use.
• Never leave the appliance in operation without supervision.
• Do not use harsh abrasive or caustic detergents to clean the appliance.
• Keep your appliance clean. Follow the cleaning instructions provided in this user'smanual.
• Do not store or use any explosive and/or ammable substances inside or in the vicinity of
this appliance, such as ammable gas sprays.

7
CATLER RECOMMENDS SAFETY FIRST
IMPORTANT SAFETY INSTRUCTIONS FOR USING ELECTRICAL EQUIPMENT
• Fully unwind the power cord before use. Connect the appliance only to aproperly
grounded socket.
• Do not leave the power cord hanging over the edge of atable or countertop or allow it to
touch ahot surface or to become tangled up.
• For safety reasons, we recommend to connect the appliance in an independent electrical
circuit separated from other appliances. Do not use adapter plugs or extension cords to
connect the appliance to apower outlet.
• Do not use this appliance in moving vehicles or on boats, outdoors, or for any purpose
other than intended. Otherwise, there is arisk of personal injury.
• Any maintenance other than standard cleaning must be performed at authorised
Catler service centre. To avoid the risk of electric shock, do not repair and/or make any
adjustments to the appliance by yourselves.
• We recommend to install aresidual current device (standard safety switches in your power
outlet) to provide ahigher level of protection when using the appliance. We recommend
to install aresidual current device (with anominal residual operating current of no more
than 30mA) in the electric circuit in which your appliance is to be connected. For further
expert advise, please contact your electrician.
The user’smanual is also available at www.catler.eu.

8KNOW YOUR SB 810 BLENDER
KNOW YOUR SB 810 BLENDER
STICK BLENDER
1
2
3
4
5
6
7
8 9 10 11 12
1. Speed control
2. Power on/o switch
3. Motor unit
4. Accessory release button
5. Stick attachment
6. Blade protective cover
7. Shaft for blade mounting
8. Multifunctional cutting blade - provided with
alayer of titanium in gold colour
9. Grinding blade
10. Whipping knife - used mainly for preparation of
mayonnaise
11. Blade remover
12. Storage box

9
KNOW YOUR SB 810 BLENDER
CHOPPER
1
2
3
4
5
1. Place for mounting the motor unit
2. Lid
3. Chopping knife
4. Chopping container with avolume of 0.5l
5. Anti-skid base
ACCESSORIES
1 2 3 4
5
1. Vacuum attachment
2. Mayonnaise making attachment
3. Whisk
4. Cleaning brush
5. Adapter for attaching awhisk or cleaning
brush to the motor unit (2 pcs in the
package)

10 ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
You can attach selected accessories to the
motor unit and use the appliance as:
1. Stick blender - attach the stick
attachment.
2. Chopper - attach the motor unit to the
chopper lid.
3. Whisk - attach the whisk.
4. Vacuum sealer - attach the vacuum
attachment.
5. Cleaning tool - attach the cleaning brush.
WARNING!
BEFORE
ASSEMBLING OR
DISASSEMBLING
THE APPLIANCE,
ENSURE THAT THE
IT’SPOWERED
OFF AND THE
POWER PLUG IS
DISCONNECTED
FROM THE MAINS
POWER SOCKET.

11
ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
STICK BLENDER
ASSEMBLY DISASSEMBLY
Attach the stick attachment to the motor
unit until you hear aclick. Make sure that
the stick attachment is properly attached
and does not move.
If you need to remove the stick attachment,
rst press the accessory release button
and then pull down to remove the stick
attachment.
Click

12 ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
INSERTING THE BLADE
The SB 810 stick blender comes with three blades that allow you to process dierent types of
food quickly and eciently.
MULTIFUNCTION
CUTTING BLADE
Suitable for mixing,
chopping vegetables
(carrots, tomatoes, etc.), ice,
etc.
GRINDING BLADE
Mincing meat, sh, etc.
WHIPPING KNIFE
Whipping eggs, making
mayonnaise, etc.
WARNING!
WHEN HANDLING THE BLADES, BE
VERY CAREFUL NOT TO GET INJURED WITH
THEIR EDGE. MISHANDLING MAY LEAD TO
SERIOUS INJURIES.

13
ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
INSERTING THE BLADE REMOVING THE BLADE
Turn the stick attachment upside down.
Place the selected blade on the shaft so
that the cutout in the blade is aligned with
the shaft tip. You will hear aclick sound to
indicate the correct position of the knife.
Then turn the blade clockwise until the tip
on the shaft stops at the edge of the blade
cutout.
Always use the supplied tool to remove
the blade from the shaft. Turn the stick
attachment upside down. Slightly turn the
blade counterclockwise until the shaft tip
is approximately in the middle of the knife
cutout. Insert the blade remover under the
knife blades and use it as alever to release
the knife from the shaft. Carefully remove
the knife from the shaft.
NOTE
Keep the blades out of the reach of
children in the storage box.
During use, the knife walls may deform
slightly. This is normal.
If you need to spread the walls, use asmall
screwdriver with aat end and insert it into
the knife - see the picture below.
If, on the other hand, you need to pull the
walls together, use pliers and carefully pull
the walls together - see the picture below.

14 ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
CHOPPER To assemble the chopper, rst place the
chopping knife on the shaft in the centre
of the container. Then place the lid on the
container and attach the motor unit.
When disassembling or inspecting processed
food, rst press the accessory release button
and then pull up to remove the motor unit.
Remove the lid and then the chopping knife
from the container.
WARNING!
THE CHOPPING
KNIFE IS VERY SHARP.
TAKE EXTRA CARE
WHILE HANDLING.
ONLY USE THE
UPPER PART OF THE
CHOPPING KNIFE
WHEN HANDLING.

15
ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
WHISK
ASSEMBLY DISASSEMBLY
Insert the whisk into the hole in the adapter
until you hear aclick. Attach the whisk to
the motor unit until you hear aclick. Make
sure that the whisk is properly attached and
does not move.
If you need to remove the whisk, rst press
the accessory release button and then
pull down to remove the whisk. Grasp the
adapter with one hand and the whisk with
the other. Push to release the whisk from
the adapter.
Click

16 ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
VACUUM SEALER
ASSEMBLY DISASSEMBLY
Attach the vacuum attachment to the
motor unit until you hear aclick. Make sure
that the vacuum attachment is properly
attached and does not move.
If you need to remove the vacuum
attachment, rst press the accessory release
button and then pull down to remove the
vacuum attachment.
Click

17
ASSEMBLY AND DISASSEMBLY OF YOUR SB 810 BLENDER
CLEANING TOOL
ASSEMBLY DISASSEMBLY
Insert the cleaning brush into the hole in
the adapter until you hear aclick. Attach
the cleaning brush to the motor unit until
you hear aclick. Make sure that the cleaning
brush is properly attached and does not
move.
If you need to remove the cleaning brush,
rst press the accessory release button and
then pull down to remove the cleaning
brush. Grasp the adapter with one hand
and the cleaning brush with the other.
Push to release the cleaning brush from
the adapter.
Click

18 OPERATING YOUR SB 810 BLENDER
OPERATING YOUR SB 810 BLENDER
BEFORE FIRST USE
Before rst use, remove all packaging
and advertising labels / stickers from the
appliance. Be sure to remove all accessories
from the package material.
Wipe the blender parts with asoft sponge
slightly moistened in warm water. Dry with
aclean cloth. Never immerse these parts in
water or wash them in the dishwasher.
Blender parts to be wiped only with
asponge:
 Motor unit
 Stick attachment
 Storage box
 Chopper lid
 Vacuum attachment
 Adapters
Wash the parts of the blender listed below in
warm water with asmall amount of washing-
up liquid.
Rinse in clean water and wipe dry. Blender
parts to be washed in water:
 Multifunction cutting knife
 Grinding blade
 Whipping blade
 Blade remover
 Chopping blade
 Chopping bowl with an anti-slip mat
 Mayonnaise preparation attachment
 Whisk
 Cleaning brush
WARNING!
ALWAYS BE
CAREFUL WHEN
HANDLING THE
BLADES. THE BLADES
ARE VERY SHARP.
MISHANDLING MAY
LEAD TO SERIOUS
INJURIES.
NOTE
No part of your blender is suitable for
dishwasher use.
USING
1. Assemble your blender according
to the intended purpose of use
- see chapter“ASSEMBLY AND
DISASSEMBLY OF YOUR BLENDER
SB 810”for more information.
2. Always make sure that the surface on
which the food container to be processed
is placed is at, stable and clean.
3. Turn the control knob to set the required
food processing speed. You can also
change the speed during operation. You
can set the speed from "1" (lowest) to "5"
(highest).
4. Press the switch to start the blender. It
is necessary to keep the switch pressed
throughout the food processing. When
the switch is released, the blender will
power o automatically.
5. If you need to check the condition of
the processed food, release the switch
and wait until the blender has stopped

19
OPERATING YOUR SB 810 BLENDER
completely. Then, unplug the power cord
from the mains socket.
6. If you use the appliance as astick
blender, whisk or cleaning tool, always
wait until the blender has come to
acomplete stop before removing the
attachment from the processed food.
Doing so while running will pose arisk of
food splashing.
7. If you use the appliance as achopper,
insert the chopping knife into the
container rst and then the food.
8. Always put food in the chopper in
achilled condition. Never process hot
food.
9. In order to process food faster and more
eciently, we recommend cutting it into
pieces of the same size.
10. If any blender accessory is equipped with
amaximum ll line, never ll food above
this line.
There is arisk of processed food
overowing and damaging the
appliance. In addition, food may not be
processed evenly.
11. If you process alarger amount of food,
divide it into smaller parts. Use the
blender continuously for amaximum of
1minute. Then let it rest for 3 minutes.
You can repeat this up to 3 times. Then
you need to let the blender rest longer.
12. The mayonnaise container is specially
designed for the preparation of
mayonnaise, do not use it for other
purposes.
SPEED OVERVIEW TABLE
Accessories Purpose of use Speed Processing
time
Stick Blender
- Multifunction
cutting knife
Mixing, chopping and mincing meat,
vegetables or ice
1-5 Max. 60 seconds
- Grinding blade Grinding meat, sh, etc. 1-5 Max. 60 seconds
- Whipping knife Whipping eggs, preparing mayonnaise,
etc.
1-5 Max. 60 seconds
Chopper Chopping meat, herbs, nuts, etc. 1-5 Max. 60 seconds
Whisk Whipping egg whites, cream, whipped
cream, etc.
1-5 Max. 60 seconds
Vacuum
attachment
Vacuuming air from special containers
or bags
1 Max. 60 seconds
Cleaning tool Cleaning bottles, tall containers,
mayonnaise attachments, etc.
1-3 10– 20 seconds

20 OPERATING YOUR SB 810 BLENDER
NOTE
We recommend setting the lowest
speed and gradually increasing it as
needed during processing. The values
in the table are only recommended
and may vary from case to case.
VACUUM ATTACHMENT
If you use ablender with avacuum
attachment, always make sure that the
protective rubber cap is inserted in the
vacuum attachment before using it. Never
use the vacuum attachment without
aprotective rubber cap.
The protective vacuum cap is two-sided.
Insert the cap into the vacuum attachment
depending on whether you are vacuuming
air from aspecial vacuum container or
aspecial vacuum bag.
If you are going to extract air from the
container, the wider end of the cap must face
outwards.
If you are going to extract air from the bag,
the narrower end of the cover must point
outwards.
Wider end of the cap suitable for extracting air
from the container
The narrower end of the cap is suitable for
extracting air from the bag
Set speed "1" and press hold down the
switch. You can use the vacuum attachment
for amaximum of 1 minute.
WARNING!
NEVER
USE ASPEED
HIGHER THAN "1".
OTHERWISE THERE IS
ARISK OF SERIOUS
DAMAGE TO THE
APPLIANCE.