CB2 Architect Desk User manual

Made in China - r05 Page 1 of 2
architect DESK
hardware
tools required
Thank you for purchasing the Architect Desk. This
page lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note:2 people are required to safely assemble this product.
Missing hardware?
Please call 800.606.6387
for replacements.
small allen wrench
(included)
1 - desktop
5 - spring
washers
5- tabletop
bolts
5 - flat
washers
2 - leg frames
(1 left, 1 right)
Customer Service 800.606.6252 I Latest instructions available on www.cb2.com
large allen wrench
(included)
1
With the assistance of another adult, attach 2
crossbars to left and right leg frames with 2
crossbar bolts per side as shown, using a
large allen wrench. Do not over tighten the
bolts.
NOTE: Do not over
tighten the bolts.
left leg
frame
components
1 - back frame
2 - crossbars
right leg
frame
crossbar
crossbar
4 - crossbar
bolts
1 - back frame
2 - back
bolts

architect DESK
Made in China - r05 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
2
With the assistance of another adult,
carefully place desktop upside down onto
a clean, padded surface. Attach desktop to
left and right leg frames with 2 flat
washers,2spring washers and 2
tabletop bolts per side as shown, using a
small allen wrench. Do not over tighten the
bolts.
NOTE: Do not over
tighten the bolts.
desktop
B
A
right leg
frame
left leg
frame
cleaning & care
Clean surfaces with a dry soft cloth. Do not
use abrasive cleaners. It is recommended
to use coasters to protect surface from
heat and water.
3
A) Attach back frame to left and right leg
frames with 1 back bolt per side as shown,
using a large allen wrench.
B) Secure back frame to desktop with 1
flat washer, 1 spring washer and 1
tabletop bolt, using a small allen wrench.
With the assistance of another adult,
position unit upright.
Assembly is now complete.
back
frame