CD.PANG CD-6019 User manual

INSTRUCTION MANUAL
LIQUID AIR FRESHENER DISPENSER
MODEL：CD-6019
ON-SCREEN INSTRUCTIONS
1-7: Monday to Sunday markers. The "√" below each day indicates a spraying day, while "×"
indicates a non-spraying day.
8. SET: When the "SET" logo flashes, it indicates the setting for the local time.
9. WORK: When the "WORK" logo flashes, it indicates the setting for the spraying day(s)
per week.
10. 24H: This setting determines the working time condition. "√" represents 24-hour
working mode, while "×" represents non-24-hour working mode.
11. ON: The time of day when the fragrance dispenser starts spraying.
12. OFF: The time of day when the fragrance dispenser stops spraying.
13. When the "LOW" icon is displayed, it indicates that the battery voltage is below 3.6
volts, and the battery should be replaced with a new one.
14. COUNT: This displays the number of times the fragrance dispenser has sprayed. It can
range from 0000 to 9999.
15.INT: This indicates the interval time (in minutes) between fragrance dispenser sprays. It
can be set within the range of 01-60 minutes.
16.Indicator Lights:
Green Light: Blinks once every 10 seconds during normal operation of the device.
Red Light: Flashes to indicate low power.
Yellow Light: Flashes to indicate the count is nearing 3000 times. Please check if the liquid
in the spray filling is exhausted. After refill press and hold the "Reset Count" button for 3
seconds to clear the spray count record.

KEY FUNCTION DESCRIPTION
Power: Press this button to turn the power on or off. When turning off the power, the
memory will be preserved, but if the battery is removed, the memory will be cleared.
Mode: Press this button to initiate relevant settings.
Adjust: Press this button to adjust the value as required.
Enter: Press this button to confirm the selected value.
Test: Press this button once for instant spraying. For the initial use or after refill, repeat
pressing this button until the nozzle sprays normally.
Reset Count: Press and hold this button for 3 seconds to clear the spray count record.
FUNCTION SETTINGS
A, Set Local Time:
1，Hour Adjustment:
Press the "Mode" button once. The “SET” and hour will start flashing.
Press the "Adjust" button to set the correct hour.
Wait for 8-9 seconds for the setting to complete.
2，Minute Adjustment:
Press the "Mode" button once, then press the "Enter" button once. The “SET” and
minute will start flashing.
Press the "Adjust" button to set the correct minute.
Wait for 8-9 seconds for the setting to complete.
3，Day of the Week Adjustment:
Press the "Mode" button once, then press the "Enter" button twice. The week icon
and the “SET” will start flashing.
Press the "Adjust" button to set the correct day of the week.
Wait for 8-9 seconds for the setting to complete.
B, Set the Fragrance Sprayer Working Days:
You can customize the fragrance sprayer's operational days to suit your specific
requirements. Choose from Monday to Sunday or set a certain number of days for it to
work.
For example, if a library is closed on Tuesdays and Wednesdays but open on all other days,
you can easily configure the fragrance sprayer to spray on Monday, Thursday, Friday,
Saturday, and Sunday. This ensures that the fragrance is dispensed only on the days when
the library is open, creating a pleasant environment for visitors.
1，Press the "Mode" button twice. The "√" or "×" symbol below Monday will start flashing,
and the screen will show the status of the fragrance machine for that day.
2，Press the "Adjust" button to toggle between "√" (working day) and "×" (non-working
day) as needed.
3，Press the "ENTER" button to move to the next day (Tuesday to Sunday) and repeat the
adjustment process using the "ADJUST" button to set the working days.
4，Wait for 8-9 seconds for the setting to complete.
C, Set the Spraying Interval Time:
1，Press the "Mode" button three times. The number under the "INT" starts flashing.
2，Press the "Adjust" button to set the spraying interval time between 1 to 60 minutes.
3，Wait for 8-9 seconds for the setting to complete.
D, Set Fragrance Sprayer Working Time Mode:
You can choose between a 24-hour working mode or non-24-hour work for the fragrance
spraying.
1，Press the "Mode" button four times. The display will show "24H" followed by a "√" or
"×" symbol, indicating the current setting.
2，Press the "Adjust" button to toggle between "√" (24-hour operation) and "×"
(non-24-hour operation).
3，Wait for 8-9 seconds for the setting to complete.
Example Setting: The current day is Monday, the time is 13:26, the device is set to
non-24-hour work mode. The device is scheduled to spray on every Wednesday, Friday,
Saturday, and Sunday. The spraying interval is set to 11 minutes.

E, Set the Daily Start Time for Spraying:
You can use the device's function to set the start and stop time for the spraying day. For
example, if the office working hours are from 9:00 to 17:00, you can set the start time of
the spraying machine to 9:00 and the stop time to 17:00. This ensures that the machine
sprays during the staff working hours.
1, Set the hour
Press the "Mode" button once, then press the "Enter" button 12 times. The "ON"
and hour on display will flash together.
Press the "Adjust" button to set the desired hour for the start of daily spraying.
Wait for 8-9 seconds for the setting to complete.
2, Set the minutes
Press the "Mode" button once, then press the "Enter" button 13 times. The "ON"
and minutes on display will flash together.
Press the "Adjust" button to set the desired minutes for the start of daily spraying.
Wait for 8-9 seconds for the setting to complete.
F, Set the Daily Stop Spraying Time:
1, Set the hour
Press the "Mode" button once, then press the "Enter" button 14 times. The "OFF"
and hour on display will flash together.
Press the "Adjust" button to set the desired hour for the end of daily spraying.
Wait for 8-9 seconds for the setting to complete.
2, Set the minutes
Press the "Mode" button once, then press the "Enter" button 15 times. The
"OFF" and minutes on display will flash together.
Press the "Adjust" button to set the desired minutes for the end of daily spraying.
Wait for 8-9 seconds for the setting to complete.
INSTALLATION
1. Press the button located on the top of the dispenser to open the lid. Refer to Figure
A for visual guidance.
2. Remove the refill bottle from the dispenser, pressing the snap mechanism and this
will detach the spray timer from the dispenser. Refer to Figure B for visual
guidance.
3. For wall-mounted installation:
a. Use a pen to mark the screw(traceless sticker screw) positions on the wall.
b. Securely fix the housing to the wall using the provided screw (traceless sticker
screw). Refer to Figure C for detailed instructions.
4. After removing the spray timer, it’s easy to insert 3 AA batteries for power. Refer to
Figure E for detailed instructions.
5. Fill the refill bottle with your preferred liquid fragrance spray. Please refer to Figure
E for detailed instructions.
6. Place the spray timer back into the dispenser, ensuring that it securely snaps into
place. Reinsert the refill bottle into the dispenser, Refer to Figure F for visual
guidance.
7. To test the functionality, press the "TEST" button multiple times until the nozzle
sprays the liquid normally.
8. Congratulations! You have successfully completed the setup.

PRECAUTIONS
1. Ensure that the distance between the bottom of the fragrance dispenser and the
ground is at least 7 feet to optimize its performance.
2. When the fragrance dispenser is powered on, avoid facing the nozzle part of the
spraying dispenser to prevent accidental spraying.
3. Always replace with new alkaline batteries and never leave dead batteries in unit.
4. When not using the fragrance dispenser, please turn off the power. If the device
will not be used for an extended period, it is recommended to disassemble the
batteries.
5. This product is not intended for children to play with and should be kept out of
their reach.
6. Avoid placing the product near open flames or high-temperature objects to prevent
damage.
TROUBLESHOOTING
If the fragrance dispenser does not work after installing the battery, please check the
following:
a. Screen not display:
Verify that the battery is correctly installed with the correct polarity.
Ensure that the battery is not damaged or depleted.
b. The screen is displaying but NO spraying:
Check if the fragrance in the tank has been used up or not filled.
Confirm that the refill tank is correctly installed, aligning the nozzle of the refillable
liquid tank accurately with the pressed contact point of the timer.
If the issue persists or you encounter any other problems, please contact customer support
for further assistance.