CDVI FTC1000 User manual

FTC1000
Facial recognition and body temperature detection
ENGLISH
EN
Conguration Guide

1] WIRING (FTC1000)
EN
FTC1000
CONFIGURATION GUIDE
2cdvi.co.uk
2] First start
Power
12 V DC
Consumption 12 W
IP66
da -25°C a +60°C
RS485 - NOT USED
POWER SUPPLY 12 V DC / 2A
RESET
(Long press reset to factory values)
RJ45 - LAN Connection
RS232 - NOT USED
NO
COM Relay Output - Dry contact *
NC
* Use a support relay to avoid damaging
the device
At the rst start, the FTC1000 device shows the IP address acquired in DHCP at the
top right of the display.
If there is no DHCP server, the device will still show an IP address through which it
will be possible to connect for conguration.
IP ADDRESS
Thank you for purchasing this product and for the trust you have in our company.

EN
FTC1000
CONFIGURATION GUIDE
3
cdvi.co.uk
POWER SUPPLY 12 V DC / 2A
3] Connection to the FTC1000 via Web Browser
4] Conguration
To congure the device click on CONFIGURATION
Set record stay time :
Not limited (stores all events overwriting the oldest ones, event log 25000)
Set record stay time (life cycle of the stored data, after the set period the event
LOG are deleted from the memory)
Log in User : admin Password : 12345
To access the device conguration / query page, type in the address bar of the
internet browser http://IP Address:7080
Ex : IP Address 192.168.1.88
http://192.168.1.88:7080
Click on System--> System Conguration --> Snapshot
Record keeping : enables memorisation of each access
Save picture : enables saving of the snapshot linked to each step
Enable LOG record

4cdvi.co.uk
EN
FTC1000
CONFIGURATION GUIDE
Click on Network--> Basic setup
Stranger passage : Allows strangers to access
Detection mask : enables mask control
Relay time : Set relay time
Relay direction : Normal (activates relay for door unlocking)
Reverse (activates relay in case of alarm)
Living body : (don’t modify)
Thermal map : show / hide heat map being recognized
IP Address Configuration
Remove the flag from DHCP and configure the desired network parameters.
Control configuration
Click on Face recognition --> Face recognition

5
cdvi.co.uk
EN
FTC1000
CONFIGURATION GUIDE
Enabling temperature control
Click on Temperature --> Temperature
Enable temperature control : enables temperature control
Temperature compensation : compensates the temperature detected in hot or cold
environments at controlled temperature.
Alarm temperature : 37.3 - don’t modify
Enable MQTT protocol
Click on Network--> Advance Setup --> MQTT
Enabling the MQTT protocol allows you to
integrate the FTC1000 device into third-
party software.
Enable the protocol and fill in the fields
according to your configurations.
Note: If you use third party software
integration, you will not be able to use the
SDP2000 software.

6cdvi.co.uk
EN
FTC1000
CONFIGURATION GUIDE
Enabling mail sending in case of alarm
Click on Network --> Advanced Setup --> SMTP
If enabled in case of alarm (high temperature / lack of faceplate) the terminal sends
an email to the 3 congured addresses.
If Attach le is selected, the snapshot of the detected alarm will be attached.
Fill in the elds according to the conguration of the email account you want to use
as the Sender.
Note: contact your mail provider or carrier to obtain the necessary data.

7cdvi.co.uk
EN
FTC1000
CONFIGURATION GUIDE
5] Query
To view the events click on PICTURE
Set the filters
- By date
- By temperature
Click on the icon with the magnifying glass
List View Grid View
Click on Download in the top right to download the photos of the selected events.
6] Facial Recognition
To carry out facial recognition, refer to the FTC1000 manual.

FTC-1000 EN - CONFIGURATION GUIDE
All the information contained within this document (pictures, drawing, features, specications and dimensions) could be perceptibly different and can be changed without prior notice. Toutes les informations mentionnées à titre indicatif sur le présent document (photos, dessins, caractéristiques techniques et dimensions) peuvent varier et sont susceptibles de
modications sans notication préalable.
*G0301FR0234V13*
CDVI Group
FRANCE (HQ)
Phone: [phone]
Fax: [phone]
CDVI SAS
FRANCE & EXPORT
31, av. du Général Leclerc
93500 PANTIN - Francia
Phone: [phone]
www.cdvi.com
CDVI AMERICAS
[CANADA - USA]
Phone: [phone]
www.cdvi.ca
CDVI BENELUX
Phone: [phone]
www.cdvibenelux.com
CDVI TAIWAN
Phone: [phone]
www.cdvichina.cn
CDVI SWITZERLAND
Phone: [phone]
www.cdvi.ch
CDVI CHINA
Phone: [phone]
www.cdvichina.cn
CDVI IBERICA
Phone: [phone]
www.cdviberica.com
CDVI ITALIA
Phone: [phone]
Fax: [phone]
www.cdvi.it
CDVI MOROCCO
Phone: [phone]
www.cdvi.ma
CDVI S WEDEN
Phone: [phone]
www.cdvi.se
CDVI UK
[UK & IRELAND]
Phone: [phone]
www.cdvi.co.uk
CDVI POLAND
Phone: [phone]
www.cdvi.com.pl