Celsicom TH500 User manual

Specications & settings T500/TH500/T501/TH501/TC502T/TC504T
All models have a battery life time of 4-5 years if the rotary switch setting
inside the sensor is set at ”5”. (default setting) This setting suits most installa-
tions. Battery lifetime changes depending on how often the sensor transmitts
data. See legend below. Please note that transmission range de-creases when
the switch is set to ”Low power”. At high power the range is 700 meters at
line of sight to the base station. T500/TH500/T501/TH501
TC502T/TC504T
User manual
Highpower 0 1 2 3 4 5
Lowpower 8 9 A B C D
Transmissioninterval 2min 5min 15min 30min 60min 3min
Thegreenfieldsaretheselectablesettingsintheswitch
"Highpower"meansthatthesensortransmitswiththehighestpossiblepower.
"Lowpower"meansthatthesensorsendusingabout50%ofthepower.
"Transmissioninterval"ishowoftenthesensorsendsitsdatatothebasestation.
Example:
Position5(standard)=highpower&3mintransmissionintervals.
Position2=highpower&15mintransmissionintervals.
Position9=lowpower&5mintransmissionintervals.
PositionB=lowpower&30mintransmissionintervals.
Model Values Range Accuracy IP-class
T500 Temperature -30°C to +60°C ± 0,2°C 54
TH500 Temperature,
humidity, abs.hum.,
dew point
0-100% RH,
-30°C to +60°C
± 3% RH,
± 0,4°C
33
T501 Temperature -30°C to +90°C ± 0,2°C 54
TH501 Temperature,
humidity, abs.hum.,
dew point
0-100% RH,
-30°C to +70°C
± 3% RH,
± 0,4°C
54
TC502T/504T Temperature, ther-
mocouple type T
-200°C to
+400°C
± 0,5°C 54 (502T)
67 (504T)
Celsicom AB, Galeasvägen 15, 302 72 Halmstad, Sweden
celsicom.se • celsiview.se

Thank you for buying a Celsicom wireless sensor!
Before installation of the sensor a Celsicom base station
must be connected to power, to the Internet and in range
of the sensor. A Celsiview cloud service must also be active
and connected to the base station unit-ID.
Installation procedure:
1. Un-screw the four screws at the bottom plate of the
sensor.
2. Connect 2 pcs 1,5V AA batteries.
3. Re-mount the four screws.
Next step is to add the sensor to the Celsiview Cloud Servi-
ce using a web browser:*
1. Log in at the cloud service at celsiview.com.
2. Click on the button ”Add location”.
3. Enter a name of the location.
4. Now a sensor is to be conneted to the location. Click at
”Click to select sensor”
5. Now all sensors the base station can hear is listed. Click
on the sensor/measuring value you wish to add. (se picture
on the next page)
Model Serial number (also written on the sensor) Value
6. Continue with setting alarm limit thresholds, alarm delay,
alarm delivery options and so and so on.
7. Click on ”Save”
8. Now repeat steps 2 to 7 to add the other sensors you
wish to add to your cloud service.
NOTE!
If a sensor measures two or more units (e.g. °C and/or
%RH), a location has to be added for each value if you like
it to be shown on the starting page ”Locations”.
9. At the page ”My account” at aerview.de you also can en-
ter alarm recipients, name of the base station and account.
For support or other questions please contact your local
dealer.
*/ We recommend the free web browsers Google Chrome, Mozilla Firefox,
Microsoft Edge or Safari for Mac/iPhone.