Central Pneumatic 67696 Assembly instructions

2
This unit was fully tested and inspected prior to shipment and will operate properly when instructions are followed. Refer to your owner’s manual for basic
troubleshooting. To avoid unnecessary return to the store, simply call Compressor Support toll free for additional assistance.
DO NOT RETURN TO STORE
IMPORTANT
STOP STOP
Compressor Support: 1-800-444-3353
(
• Air Compressor will automatically shut off when maximum PSI is reached. When the tank pressure drops to the cut in pressure (low pressure) and the on/off switch
is in the ON position, the unit will automatically restart.
• On occasion, maximum pressure in tank will remain until next use thus resulting in a sense of no power (See bullet above).
• To avoid power loss, overheating and ensure power, use additional air hose rather than extension cords.
• It is the consumer’s responsibility to drain oil lubed units prior to shipment to meet ICC, state and local fire regulations.
Please have your model number and serial number available. These can be found on the data label on your product. Retain a copy of your receipt with purchase
date for reference.
NOTICE
฀฀฀฀฀฀฀฀฀฀฀฀฀8%&0)3*'328)287-2863(9'8-32(%2+)6!!&"!%"!$ ฀฀#/.35-%2฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀
฀฀฀฀
This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability
have been given top priority in the design of this product making it easy to mantain and operate.
Introduction ......................................................................................................................................................................2
General Safety Rules....................................................................................................................................................3-4
Specific Safety Rules .......................................................................................................................................................5
Symbols.........................................................................................................................................................................6-7
Electrical...........................................................................................................................................................................8
Glossary of Terms ............................................................................................................................................................9
Features....................................................................................................................................................................10-11
Assembly...................................................................................................................................................................11-12
Operation...................................................................................................................................................................13-14
Maintenance...................................................................................................................................................................15
Troubleshooting..............................................................................................................................................................16
Warranty.........................................................................................................................................................................20
TABLE OF CONTENTS
INTRODUCTION
If this compressor is altered in any way, existing warranties shall be voided. Harbor Freight Tools disclaims any
liabilities whatsoever for any loss, personal injury, or damage.

3
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in electric
shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents. Floor must
not be slippery from wax or dust.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while
operating tools. Distractions can cause you to lose
control.
Operate air compressor in an open area at least 18
in. away from any wall or object that could restrict
the flow of fresh air to ventilation openings.
ELECTRICAL SAFETY
Avoid body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerators. There is an
increased risk of electric shock if your body is grounded.
Don’t expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord to carry
the tool or pull the plug from an outlet. Keep cord
away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately. Damaged
cords increase the risk of electric shock.
When operating a power tool outside, use an
outdoor extension cord marked “W-A” or “W”.
These cords are rated for outdoor use and reduce the
risk of electric shock.
PERSONAL SAFETY
Eye protection which conforms to ANSI specifica-
tions and provides protection against flying
particles both from the FRONT and SIDE should
ALWAYS be worn by the operator and others in the
work area when loading, operating, or servicing
this tool. Eye protection is required to guard against
flying fasteners and debris, which could cause severe
eye injury.
The employer and/or user must ensure that proper
eye protection is worn. We recommend a Wide Vision
Safety Mask for use over eyeglasses or standard safety
glasses that provide protection against flying particles
both from the front and side. Always use eye protection
which is marked to comply with ANSI Z87.1.
Additional safety protection will be required in
some environments. For example, the working area
may include exposure to a noise level which can lead to
hearing damage. The employer and user must ensure
that any necessary hearing protection is provided
and used by the operator and others in the work
area. Some environments will require the use of head
protection equipment. When required, the employer
and user must ensure that head protection marked to
comply with ANSI Z89.1 is used.
Stay alert, watch what you are doing, and use
common sense when operating a power tool. Do
not use tool while tired or under the influence
of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enables better
control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
tool in unexpected situations.
TOOL USE AND CARE
Do not exceed the pressure rating of any
component in the system.
Protect material lines and air lines from damage or
puncture. Keep hose and power cord away from sharp
objects, chemical spills, oil, solvents, and wet floors.
Check hoses for weak or worn condition before
each use, making certain all connections are
secure. Do not use if defect is found. Purchase a
new hose or notify an authorized service center for
examination or repair.
Release all pressures within the system slowly.
Dust and debris may be harmful.
Store idle tools out of the reach of children and
other untrained persons. Tools are dangerous in the
hands of untrained users.
Maintain tools with care. Follow maintenance
instructions. Properly maintained tools are easier to
control.
Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that
may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are
caused by poorly maintained tools.
GENERAL SAFETY RULES

4
Never point any tool toward yourself or others.
Keep the exterior of the air compressor dry, clean,
and free from oil and grease. Always use a clean
cloth when cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any strong solvents to
clean the unit. Following this rule will reduce the risk of
deterioration of the enclosure plastic.
SERVICE
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel may result in a risk of injury.
GENERAL SAFETY RULES
Disconnect power supply, open drain valve to
decompress tank and allow water to drain, and
allow air compressor to become cool to the touch
before servicing. Turn pressure regulator knob fully
counter clockwise after shutting off compressor.
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance
instructions may create a risk of injury.

5
Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock,
fire, or serious injury.
Drain tank of moisture after each day’s use.
If unit will not be used for a while, it is best to leave drain
valve open until such time as it is to be used. This will
allow moisture to completely drain out and help prevent
corrosion on the inside of tank.
Risk of Fire or Explosion. Do not spray flammable
liquid in a confined area. Spray area must be well
ventilated. Do not smoke while spraying or spray where
spark or flame is present. Keep compressors as far from
the spraying area as possible, at least 15 feet from the
spraying area and all explosive vapors.
Risk of Bursting. Do not adjust regulator to result
in output pressure greater than marked maximum
pressure of attachment. Do not use at pressure greater
than 150 PSI.
If connected to a circuit protected by fuses, use
time-delay fuses with this product.
To reduce the risk of electric shock, do not expose to
rain. Store indoors.
Inspect tank yearly for rust, pin holes, or other
imperfections that could cause it to become unsafe.
Never weld or drill holes in the air tank.
Make sure the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of balance
or footing and may become damaged.
Use the air compressor only for its intended use. Do
not alter or modify the unit from the original design
or function.
Always be aware that misuse and improper handling
of this tool can cause injury to yourself and others.
Never leave a tool unattended with the air hose
attached.
Do not operate this tool if it does not contain a
legible warning label.
Do not continue to use a tool or hose that leaks air
or does not function properly.
Always disconnect the air supply and power supply
before making adjustments, servicing a tool, or when a
tool is not in use.
Do not attempt to pull or carry the air compressor
by the hose.
Your tool may require more air consumption than
this air compressor is capable of providing.
SPECIFIC SAFETY RULES
Always follow all safety rules recommended by the
manufacturer of your tool, in addition to all safety
rules for the air compressor. Following this rule will
reduce the risk of serious personal injury.
Never direct a jet of compressed air toward people
or animals. Take care not to blow dust and dirt
towards yourself or others. Following this rule will
reduce the risk of serious injury.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the
risk of serious personal injury.
Do not use this air compressor to spray chemicals.
Your lungs can be damaged by inhaling toxic fumes. A
respirator may be necessary in dusty environments or
when spraying paint. Do not carry while painting.
Inspect tool cords and hoses periodically and, if
damaged, have repaired at your nearest Authorized
Service Center. Constantly stay aware of cord
location. Following this rule will reduce the risk of
electric shock or fire.
Never use an electrical adaptor with this grounded
plug.
Check damaged parts. Before further use of the
air compressor or air tool, a guard or other part
that is damaged should be carefully checked to
determine that it will operate properly and perform
its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may
affect its operation. A guard or other part that is
damaged should be properly repaired or replaced
by an authorized service center. Following this rule
will reduce the risk of shock, fire or serious injury.
Make sure your extension cord is in good
condition. When using an extension cord, be sure
to use one heavy enough to carry the current your
product will draw. A wire gauge size (A.W.G.) of at
least 14 is recommended for an extension cord 50
feet or less in length. A cord exceeding 100 feet is
not recommended. If in doubt, use the next heavier
gauge. The smaller the gauge number, the heavier
the cord. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
Save these instructions. Refer to them frequently
and use them to instruct others who may use this air
compressor. If you loan someone this tool, load them
these instructions also.
WARNING:
The brass components of this product contain lead, a
chemical known to the state of California to cause birth
defects (or other reproductive harm).
(California health & safety code § 25249.5, et seq.)

6
150 PSI.

7
7=1&3077)6:-')7IVZMGMRKVIUYMVIWI\XVIQIGEVIERHORS[PIHKIERHWLSYPHFITIVJSVQIHSRP]F]EUYEPMJMIHWIVZMGIXIGLRMGMER*SVWIVZMGI[IWYKKIWX]SYVIXYVRXLITVSHYGXXSXLIRIEVIWX%98,36->)(7)6:-')')28)6JSVVITEMV;LIRWIVZMGMRKYWISRP]MHIRXMGEPVITPEGIQIRXTEVXW;%62-2+8SEZSMHWIVMSYWTIVWSREPMRNYV]HSRSXEXXIQTXXSYWIXLMWTVSHYGXYRXMP]SYVIEHXLSVSYKLP]ERHYRHIVWXERHGSQTPIXIP]XLISTIVEXSVWQERYEP7EZIXLMWSTIVEXSVWQERYEPERHVIZMI[JVIUYIRXP]JSVGSRXMRYMRKWEJISTIVEXMSRERHMRWXVYGXMRKSXLIVW[LSQE]YWIXLMWTVSHYGX8LISTIVEXMSRSJER]TS[IVXSSPGERVIWYPXMRJSVIMKRSFNIGXWFIMRKXLVS[RMRXS]SYVI]IW[LMGLGERVIWYPXMRWIZIVII]IHEQEKI&IJSVIFIKMRRMRKTS[IVXSSPSTIVEXMSREP[E]W[IEVWEJIX]KSKKPIWWEJIX]KPEWWIW[MXLWMHIWLMIPHWSVEJYPPJEGIWLMIPH[LIRRIIHIH;IVIGSQQIRH;MHI:MWMSR7EJIX]1EWOJSVYWISZIVI]IKPEWWIWSVWXERHEVHWEJIX]KPEWWIW[MXLWMHIWLMIPHW%P[E]WYWII]ITVSXIGXMSR[LMGLMWQEVOIHXSGSQTP][MXL%27->
;%62-2+7%:)8,)7)-27869'8-327
8LIJSPPS[MRKWMKREP[SVHWERHQIERMRKWEVIMRXIRHIHXSI\TPEMRXLIPIZIPWSJVMWOEWWSGMEXIH[MXLXLMWTVSHYGX7=1&307-+2%01)%2-2+
(%2+)6;%62-2+'%98-32'%98-32
-RHMGEXIWERMQQMRIRXP]LE^EVHSYWWMXYEXMSR[LMGLMJRSXEZSMHIH[MPPVIWYPXMRHIEXLSVWIVMSYWMRNYV]-RHMGEXIWETSXIRXMEPP]LE^EVHSYWWMXYEXMSR[LMGLMJRSXEZSMHIHGSYPHVIWYPXMRHIEXLSVWIVMSYWMRNYV]-RHMGEXIWETSXIRXMEPP]LE^EVHSYWWMXYEXMSR[LMGLMJRSXEZSMHIHQE]VIWYPXMRQMRSVSVQSHIVEXIMRNYV];MXLSYX7EJIX]%PIVX7]QFSP-RHMGEXIWEWMXYEXMSRXLEXQE]VIWYPXMRTVSTIVX]HEQEKI

8

฀฀฀฀฀฀฀฀
Replace a damage or worn cord immediately.
Replace a damaged or worn cord immediately.

9
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀

10
FEATURES
PRODUCT SPECIFICATIONS
Running Horsepower................................................1.5 HP
Air Tank Capacity........................................................ 6 gal.
Air Pressure....................................................150 PSI max.
Air Delivery......................................... 2.5 SCFM @ 90 PSI
Lubrication..............................................................Oil-Free
Gauges....................................................... 1.5 in. diameter
Input.................................. 120 V, 60 Hz, AC only, 12 Amps
Net Weight (compressor only)................................35.8 lbs.
Fig. 2
REGULATOR
PRESSURE
GAUGE
TANK
PRESSURE
GAUGE
PRESSURE
REGULATOR
KNOB
LOCKING
NUT
SAFETY VALVE
BUILT-IN
ACCESSORY
STORAGE
HANDLE
MANUAL
ON/OFF
SWITCH
QUICK
COUPLER
DRAIN
VALVE
TANK
RUBBER
FOOT

11
FEATURES
ASSEMBLY
KNOW YOUR AIR COMPRESSOR
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BUILT-IN CORD WRAP
A built-in cord wrap is provided for convenience in moving
and storing the unit.
OIL-FREE UNIVERSAL MOTOR
Your air compressor features permanently lubricated
bearings.
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
SAFETY VALVE
The safety valve is designed to automatically release air if
the air receiver pressure exceeds the preset maximum.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air
in the tank.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the compressor from the box. Make
sure that all items listed in the packing list are included.
I nspect the compressor carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-800-444-3353 for assistance.
PACKING LIST
Air Compressor
Operator’s Manual
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀3%!,4(2%!$4!0%#/),(/3%

12
ASSEMBLY
BREAKING IN THE PUMP
See figure 3 - 4.
Check and tighten all bolts, fittings, etc.
Turn the pressure regulator knob fully clockwise to
open the air flow. Turn the locking nut clockwise to lock.
Place the switch in the OFF (O) position and plug in the
power cord.
Open the drain valve completely.
Turn the air compress ON ( l ) and run the air
compressor for 10 minutes to break in pump parts.
Place the switch in the OFF (O) position.
Close the drain valve.
REGULATOR
PRESSURE
GAUGE
PRESSURE
REGULATOR
KNOB
QUICK
COUPLER
LOCKING
NUT
TANK
PRESSURE
GAUGE
SAFETY
VALVE
ON/OFF
SWITCH
Fig. 3
Fig. 4
DRAIN VALVE

13
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n ฀฀฀n ฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀
See Figure 3.

14
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀n฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀
฀
See Figure 6.
See Figure 5.
Fig. 6
Fig. 5

15
฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀฀

When servicing, use only identical Harbor Freight Tools
replacement parts. Use of any other parts may create a
hazard or cause product damage.

16
16
TROUBLESHOOTING
Problem Possible Cause Solution
Compressor will not run Loss of power or overheating
No electrical power
Blown shop/house fuse
Shop/house breaker open
Thermal overload open
Pressure switch bad
Tank is full of air
Check for proper use of extension
cord
Check to be sure unit is plugged in
Check fuse/breaker or motor over-
load
Replace shop/house blown fuse
Reset shop/house breaker, determin-
ing why problem happened
Motor will restart when cool
Replace pressure switch
Compressor will turn on when tank
pressure drops to cut-in pressure
Motor hums but cannot run or runs
slowly
Low voltage
Wrong gauge wire or length of exten-
sion cord
Shorted or open motor winding
Defective check valve or unloader
Check with voltmeter
Check for proper gauge wire and
cord length
Take compressor to service center
Take compressor to service center
Fuses blow/circuit breaker trips
repeatedly
Incorrect size fuse, circuit overload
Wrong gauge wire or length of exten-
sion cord
Defective check valve or under loader
Check for proper fuse, use time-
delay fuse, disconnect other electri-
cal appliances from circuit or operate
compressor on its own branch circuit
Check for proper gauge wire and
cord length
Take compressor to service center
Thermal overload protector cuts out
repeatedly
Low voltage
Lack of proper ventilation/room tem-
perature too high
Wrong gauge wire or length of exten-
sion cord
Check with voltmeter
Move compressor to well-ventilated
area
Check for proper gauge wire and
cord length
Air receiver pressure drops when
compressor shuts off
Loose connections (fittings, tubing,
etc.)
Loose drain valve
Check valve leaking
Check all connections with soap and
water solution and tighten
Tighten drain valve
Take compressor to service center
DANGER:
Do not disassemble check valve
with air in tank — bleed tank.
Excessive moisture in discharge air Excessive water in air tank
High humidity
Drain tank
Move to area of less humidity; use air
line filter
Compressor runs continuously Defective pressure switch
Excessive air usage
Take compressor to service center
Decrease air usage; compressor not
large enough for tool’s requirement
Compressor vibrates Loose mounting bolts Tighten mounting bolts
Air output lower than normal Broken inlet valves
Connections leaking
Take compressor to service center
Tighten connections

17
NOTES

18
NOTES

19
NOTES

LIMITED 1 YEAR / 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser that for a
period of one year from date of purchase that the tank is free of defects in materials
and workmanship (90 days if used by a professional contractor or if used as rental
equipment). Harbor Freight Tools also warrants to the original purchaser, for a period of
ninety days from date of purchase, that all other parts and components of the product
are free from defects in materials and workmanship. This warranty does not apply to
damage due directly or indirectly to misuse, abuse, negligence or accidents, repairs or
alterations outside our facilities, normal wear and tear, or to lack of maintenance. We
shall in no event be liable for death, injuries to persons or property, or for incidental,
contingent, special or consequential damages arising from the use of our product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY
IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation of the
complaint must accompany the merchandise. If our inspection verifies the defect, we
will either repair or replace the product at our election or we may elect to refund the
purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that
the defect resulted from causes not within the scope of our warranty, then you must
bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • [phone]
For technical questions, please call 1-800-444-3353.
SKU 67696
SKU 67696
SKU 68149
9039580