Centro 5800 User manual

85-1628-0 (G61701) Propane
85-1653-8 (G61703) Natural Gas
Limited 5-Year Warranty
Centro 5800
Assembly Manual
Read and save manual for future reference.
Assemble your grill immediately.
Missing or damaged parts should be
claimed within 15 days of purchase.
Manual Revision #: 020708

DANGER
1. If you smell Gas:
a. Shut o gas to the appliance
b. Extinguish any open ame
c. Open lid
d. If odor continues, keep away from
the appliance and immediately
call your gas supplier or your
re department
2. Do not store or use gasoline or other
ammable vapours and liquids in the
vicinity of this or any other appliance.
3. An LP cylinder not connected for use shall
not be stored in the vicinity of this or any
other appliance.
4. Requires two people to complete the
assembly process.
5. Beware of sharp edges.
WARNING
Failure to follow all of the Manufacturer’s
instructions could result in hazardous res,
explosions, property damage, or serious
personal injury or even death.
Follow all leak check procedures carefully
prior to operation of barbecue, even if grill
was dealer assembled. Do not try to light
this barbecue without reading the Lighting
Instructions section of this manual.
THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES
To ORDER non-warranty replacement parts or accessories, or to register your warranty,
please visit us on the web at
www.centrobbqs.com.
CAUTION
Read and follow all safety statements,
assembly instructions, and use and care
directions before attempting to assemble
and cook.
CAUTION
Sharp edges. Wear gloves when assembling
your grill.
THIS BARBECUE IS FOR OUTDOOR USE ONLY
CONTACT CALL CENTRE IF ANY PARTS ARE MISSING
INSTALLER OR ASSEMBLER/CONSUMER
This manual should be kept with the BBQ at
all times.
HEAVY ARTICLE NEEDS 2 TO LIFT

1
HARDWARE PACK
TOOLS NEEDED FOR ASSEMBLY
• #2 Phillips screwdriver (Long and short)
• ¼” Slotted screwdriver
• Adjustable wrench
• Pliers
• Rubber Mallot
Before assembling the barbecue, read these
instructions carefully.
Assemble the barbecue on a at, clean surface.
Grill is heavy.
Notes: Do not fully tighten all the nuts during this
initial stage.
No. Description Part Number Quantity
1¼"×38mm Screw 20120-13038-250 4
2 ¼"×16mm Screw 20120-13016-250 8
3 ¼"×13mm Screw 20120-13013-250 14
4ø7 Lock Washer 41400-07000-250 26
5 ø7 Washer 40300-07000-250 26
6 NO.10×10 Screw 20124-10010-250 24
7ø5 Lock Washer 41400-05000-250 24
8 ø5 Washer 40300-05000-250 24
9ST4.2×10 Tapping Screw 22500-42010-137 1
10 NO.8-32UNC x10 Screw 20332-08010-250 4
11 Control Knob G412-4500-9000 1
12 Wrench G401-0071-0182 1
13 Wing Nut 33301-04000-032 1
#1. ¼”×38mm Screw (x4)
#4. ø7 Lock Washer (x26)
#7. ø5 Lock Washer (x24)
#11. Knob (x1) #12. Wrench (x1)
#13. Wing Nut (x1)
#10. NO.8-32UNC x10 Screw (x4)
#2. ¼”×16mm Screw (x8)
#5. ø7 Washer (x26)
#8. ø5 Washer (x24)
#3. ¼”×13mm Screw (x14)
#6. NO.10×10 Screw (x24)
#9. ST4.2×10 Tapping Screw (x1)
Caution:
Sheet metal can cause injury. Wear gloves when installing the grill.

2
Item Qty. Description Part No.
CN 1Front Brace G617-0023-01
CO 1Upper Back Panel G617-2700-01
CP 1Tank Exclusion G617-0037-01
DA 1Side shelf table- Left G617-1100-01
DB 1Side Shelf fascia- Left G617-0030-01
DC 1Side Burner Drip Pan G617-0035-01
DD 1 Side Burner Assembly G433-1400-01
DE 1Electrode Set, Sideburner G433-0047-01
DF 1 Lid- Sideburner G507-0011-01
DG 1 Cooking Grate, Sideburner G501-0077-01
DH 1 Side shelf table- Right G617-1500-01
DI 1 Side shelf fascia-Right G617-0026-01
DJ1 1 Towel bar G617-0027-01
DJ2 2 Towel bar end caps G617-0028-01
EA 1Cart side panel-Left G617-0700-01
EB 1Cart Side Panel, Right G617-0800-01
EC 1Pillar- Left G617-2200-01
ED 1Pillar- Right G617-2300-01
EE 2 Magnet assembly G501-0016-01
EF 1Door assembly G617-8000-01
EG 1Cart back panel G617-0022-01
EH 1Bottom shelf G617-0900-01
EI 2 Wheel with lock G401-0061-01
EJ 2 Wheel G606-0027-01
1Hardware Pack G617-B001-01
1Assembly Manual G617-M001-01
1Safety & Care Manual G617-M001-02
PARTS LIST (PROPANE) FOR 85-1628-0 (G61701)
Item Qty. Description Part No.
AA1 1Top Lid Assembly G617-0100-01
AA2 1Lid Inner Insert G617-0001-01
AB 1Lid handle G617-0003-01
AC 1Lid handle end cap-Left G617-0004-01
AD 1Lid handle end cap-Right G617-0005-01
AE 1Logo Plate G412-0001-01
AF 1Thermometer G412-0003-01
AG 2 Screw F/ Top Lid G501-0005-01
AH 2 Lid Bumper G508-0063-01
BA1 1Burner box assembly G617-0200-01
BA2 1Burner box side panel- Left G617-0300-01
BA3 1Burner box side panel- Right G617-0400-01
BA4 1Rotisserie Burner Brace G617-0011-01
BB 1Upper side panel- Left G617-0500-01
BC 1Upper side panel- Right G617-0600-01
BD 3 Main Burner-A G502-1700-01
BE 1Main Burner-B G502-1900-01
BF 1Carryover assembly G617-0029-01
BG 4Flame Tamer G617-0019-01
BH 3 Cooking Grate, Burnerbox G617-0020-01
BI 1Warming Rack G617-0018-01
BJ 1Wind Shield, Rotisserie G617-0036-01
BK 1Rotisserie Burner G607-4000-01
BL1 1Electrode Set, Rotisserie Burner G411-0002-01
BL2 1Ground wire, rotisserie burner G411-0004-01
BM 1Match Holder G608-0019-01
CA 1Manifold Assembly G617-4000-01
CB 1Regulator G433-0034-01
CC 1Valve, Sideburner G617-0010-01
CD 1Metal Hose, sideburner G608-0039-01
CE 1Rotisserie exible hose G411-0013-01
CF1 1Electronic Igniter assembly G508-0075-01
CF2 1Electronic Ignition Button G501-0072-01
CG1 2 Electrode Set, Main Burner G617-0017-01
CG2 1Ground wire, main burners G411-0004-01
CH 5 Control Knobs G412-4500-01
CI 1Rotisserie Knob G617-4200-01
CJ 1Series Logo G617-0013-01
CK 1Control Panel G617-0012-01
CL 1Grease Tray G617-1300-01
CM 1Grease Cup G416-0015-01

3
EXPLOADED DIAGRAM (PROPANE) FOR 85-1628-0 (G61701)
AG
AH
AC BI
BH
BG
BA4
BC
BK
BD
BB
CD
BA1
CF2
CF1
DI
DH
AB
EE
BE
BF
CG1
EC EB
AF
AE
AD
EJ EI
BM EH
Safety & Care
Manual
Assembly
Manual

4
PARTS LIST (NATURAL GAS) FOR 85-1653-8 (G61703)
Item Qty. Description Part No.
AA1 1Top Lid assembly G617-0100-01
AA2 1Lid Inner Insert G617-0001-01
AB 1Lid handle G617-0003-01
AC 1Lid handle end cap-Left G617-0004-01
AD 1Lid handle end cap-Right G617-0005-01
AE 1Logo Plate G412-0001-01
AF 1Thermometer G412-0003-01
AG 2 Screw F/ Top Lid G501-0005-01
AH 2 Lid Bumper G508-0063-01
BA1 1Burner box assembly G617-0200-01
BA2 1Burner box side panel- Left G617-0300-01
BA3 1Burner box side panel- Right G617-0400-01
BA4 1Rotisserie Burner Brace G617-0011-01
BB 1Upper side panel- Left G617-0500-01
BC 1Upper side panel- Right G617-0600-01
BD 3 Main Burner-A G502-1700-01
BE 1Main Burner-B G502-1900-01
BF 1Carryover assembly G617-0029-01
BG 4Flame Tamer G617-0019-01
BH 3 Cooking Grate, Burner box G617-0020-01
BI 1Warming Rack G617-0018-01
BJ 1Wind Shield, Rotisserie G617-0036-01
BK 1Rotisserie Burner G607-4000-01
BL1 1Electrode Set, Rotisserie Burner G411-0002-01
BL2 1Ground wire, rotisserie burner G411-0004-01
BM 1Match Holder G608-0019-01
CA 1Manifold Assembly G617-4100-01
CB 1Natural Gas hose G411-0084-01
CC 1Valve, Sideburner G617-0024-01
CD 1Metal Hose, sideburner G608-0039-01
CE 1Rotisseries Flexible hose G601-0072-01
CF1 1Electronic Igniter assembly G508-0075-01
CF2 1Electronic Ignition Button G501-0072-01
CG1 2 Electrode Set, Main Burner G617-0017-01
CG2 1Ground wire, main burners G411-0004-01
CH 5 Control Knobs G412-4500-01
CI 1Rotisserie Knob G617-4200-01
CJ 1Series Logo G617-0013-01
CK 1Control Panel G617-0012-01
CL 1Grease Tray G617-1300-01
Item Qty. Description Part No.
CM 1Grease Cup G416-0015-01
CN 1Front Brace G617-0023-01
CO 1Upper Back Panel G617-2700-01
DA 1Side shelf table- Left G617-1100-01
DB 1Side Shelf fascia- Left G617-0030-01
DC 1Side Burner Drip Pan G617-0035-01
DD 1 Side Burner Assembly G433-1400-01
DE 1Electrode Set, Sideburner G433-0047-01
DF 1 Lid- Sideburner G507-0011-01
DG 1 Cooking Grate, Sideburner G501-0077-01
DH 1 Side shelf table- Right G617-1500-01
DI 1 Side shelf fascia-Right G617-0026-01
DJ1 1 Towel bar G617-0027-01
DJ2 2 Towel bar end caps G617-0028-01
EA 1Cart side panel-Left G617-0700-01
EB 1Cart Side Panel, Right G617-0800-01
EC 1Pillar- Left G617-2200-01
ED 1Pillar- Right G617-2300-01
EE 2 Magnet assembly G501-0016-01
EF 1Door assembly G617-8000-01
EG 1Cart back panel G617-0022-01
EH 1Bottom shelf G617-2600-01
EI 2 Wheel with lock G401-0061-01
EJ 2 Wheel G606-0027-01
1Hardware Pack G617-B001-01
1Assembly Manual G617-M001-01
1Safety & Care Manual G617-M001-02

5
EXPLOADED DIAGRAM (NATURAL GAS) FOR 85-1653-8 (G61703)
BI
BH
BG
BA4
BK
BD
BB
BA1
AG
AH
AC AB
DH
CG1
CF2
CF1
EE
DI
CD
BC
BE
BF
AF
AE
AD
AA
EJ EI
EC
CE
EB
EH
BM
Safety & Care
Manual
Assembly
Manual

6
EA
EB
EH
Front view
ASSEMBLY INSTRUCTIONS
1
2
1. Separate the 2 dierent types of wheels, 2 locking
wheels (EI) and 2 regular wheels (EJ).
Attach the locking wheels (EI) to the back of the bottom
shelf (EH) and the regular wheels (EJ) to the front of the
bottom shelf (EH).
To secure the 4 wheels, hand tighten rst. Then, tighten
further using the Wrench provided in the hardware pack.
2. Ensure that the wheels are rmly locked in the“ON”
position before continuing.
Assemble the left side panel (EA) and the right side
panel (EB) to the bottom shelf (EH).
EJ
EH
#3 - 1/4” × 13mm Screw (x6)
#4 - ø7 Lock Washer (x6)
#5 - ø7 Washer (x6)
Back view
EI
Close up
Close up

7
ASSEMBLY INSTRUCTIONS
3. Attach the Front Brace (CN) to the Left and right cart
side panels (EA and EB)
TIP: One person should align the left side, while the
second person assembles the right side.
3
EB
CN
EA
Back view
#6 - NO. 10x10 Screw (x4)
#7 - ø5 Lock Washer (x4)
#8 - ø5 Washer (x4)
44. Assemble the Left and right Pillars (EC and ED), to the cart
side panels, as shown in gure A and B.
Next, assemble the left and right pillars to the Front brace
(CN) and the Bottom shelf (EH), as shown in gure C and D.
TIP: One person should align the left side, while the
second person assembles the right side.
A
BD
C
#6 - NO. 10x10 Screw (x8)
#7 - ø5 Lock Washer (x8)
#8 - ø5 Washer (x8)
EC
CN

8
6a. Position the top lid and burner box assembly (A and
B) onto cart assembly (C) as shown.
6b. Use the hardware to connect both parts, on the
left and right sides, at the three points indicated in
Figure B and C.
6THIS STEP REQUIRES 3 OR MORE PEOPLE.
DO NOT ATTEMPT ALONE. EXTREMELY HEAVY.
ASSEMBLY INSTRUCTIONS
EC EA EB
ED
EH
EG
5. Attach the cart back panel (EG) to the rear of the
left and right cart side panels (EA and EB).
Right side
Left side
5
BC
#3 - 1/4” × 13mm Screw (x4)
#4 - ø7 Lock Washer (x4)
#5 - ø7 Washer (x4)
#6 - NO. 10x10 Screw (x6)
#7 - ø5 Lock Washer (x6)
#8 - ø5 Washer (x6)
A

9
ASSEMBLY INSTRUCTIONS
77. Attach the upper back panel (CO) to both the left and
right side panels (EA and EB).
Only install hardware in the bottom portion of the back
panel, as shown in gure B.
#1 - ¼”×38mm Screw (x2)
#4 - ø7 Lock Washer (x2)
#5 - ø7 Washer (x2)
CO
Back view
DI
DH
DJ
88a. Attach the right side shelf fascia(DI) to the right
side shelf table (DH), as shown in gure A.
8b. Assemble the towel bar ( DJ ) to the right side
shelf( DH) as shown in gure B.
A
B
EB
EA
B
#6 - NO. 10x10 Screw (x3)
#7 - ø5 Lock Washer (x3)
#8 - ø5 Washer (x3)
#3 - 1/4” × 13mm Screw (x4)
#4 - ø7 Lock Washer (x4)
#5 - ø7 Washer (x4)

10
10 10. Attach the left shelf fascia (DB) to the left side shelf
table (DA).
DA
DC
DB
Front
ASSEMBLY INSTRUCTIONS
9TIP: To position the right side shelf, insert the two hooks
on the side shelf assembly into the two openings
located on the right upper side panel (BC).
9. Assemble the right side shelf assembly to the cart
assembly, as shown in gure B.
DH
DI
*
B
*#1 - ¼” x 38mm Screw (x1)
#5 - ø7 Washer (x5)
#2 - ¼” x 16mm Screw (x4)
#4 - ø7 Lock Washer (x5)
#6 - NO. 10x10 Screw (x3)
#7 - ø5 Lock Washer (x3)
#8 - ø5 Washer (x3)
BC

11
11
ASSEMBLY INSTRUCTIONS
DA
DB
*
12a. Remove the hardware that is pre-assembled
to the side burner valve bracket(CC), as shown
in gure B. Insert the side burner valve stem
through the rear of the left side shelf fascia(DB).
Assemble the side burner valve to the side shelf
fascia, using the hardware removed.
Hardware may be included with the hardware pack.
12b. Assemble the Side burner control knob to the
side burner valve (CC).
12
DA
DB
CH
A
B
TIP: To position the left side shelf, insert the two hooks
on the side shelf assembly into the two openings
located on the upper left side panel (BB).
11. Assemble the right side shelf assembly to the cart
assembly, as shown in gure B.
CC
B
#1 - ¼” x 38mm Screw (x1)
#5 - ø7 Washer (x5)
#2 - ¼” x 16mm Screw (x4)
#4 - ø7 Lock Washer (x5)
*#1 - ¼” x 38mm Screw (x1)
#5 - ø7 Washer (x5)
#2 - ¼” x 16mm Screw (x4)
#4 - ø7 Lock Washer (x5)
BB
#11 - Control Knob (x1)

12
13 13a. Position the side burner (DD) through the
opening in the left side shelf (DA).
ASSEMBLY INSTRUCTIONS
Underside view
#13 - Wing Nut (x1)
DD
13b. Make sure that the burner engages the side
burner valve as shown as shown in gure B.
13c. Using the Wing nut provided, assemble the
side burner to the side burner drip pan (DC),
as shown in gure C.
A
B
C
DC

13
14 For propane model only.
14. Insert the at end of the Tank Exclusion
Bar (CP) into the groove on the upper back
panel (CO), as shown in gure B. Next,
attach the tank exclusion bar (CP) to the
Front Brace (CN) using the self tapping, as
shown in gure C
#9 - ST4.2x10 Tapping Screw (x1)
CP
CO
ASSEMBLY INSTRUCTIONS
CN
13 13d. Attach the end of the side burner electrode
wire (DE) to the underside of the side
burner electrode, as shown in gure D.
Ensure that the wire is pushed in rmly.
13e. Place the side burner cooking grate(DG)
into postion on the side burner shelf, as
shown in gure E.
DE
DG
D
E
C
B
CP

14
16 16. Place the ame tamers (BG) into the burner box.
ASSEMBLY INSTRUCTIONS
BG
15
#10 - NO. 8-32UNCx10 Screw (x4)
EF
ED
TIP: Before attempting to assemble the door (EF) to
the right pillar (ED), locate the two clasps on the
door Hinge. Next, locate the two small openings
on the right side pillar.
15a. Hold the door perpendicular to the BBQ Cart.
Align the two clasps on the door hinge (EF), with
the two holes on the right side pillar (ED). Once
aligned push the two clasps into the openings, and
immediately push down to lock clasps in place.
15b. Assemble the door (EF) to the right pillar (ED), as
shown in gure B, using the screws provided.

15
17
18
17a. Place the cooking grates (BH) into the burner box, as
shown in figure A.
17b. Insert the three small positioning rods of the
warming rack (BI) into the rotisserie burner
brace (BA4)
18a. Insert the grease tray (CL) into the opening
in the upper back panel (CO), making sure to
engage tracks located under burner box.
18b. Place the grease cup (CM) onto the tracks, lo-
cated opn the underside of the grease tray (CL).
ASSEMBLY INSTRUCTIONS
CL
CM
CO
BH
BI
A
B

16
19. Unscrew the electronic ignitor button (CF2)
and insert one AA battery into the electronic
igniter battery compartment, with the positive
end facing outward.
* Battery not included.
For propane model only.
20a. Position the 20 lb propane tank onto the
bottom shelf (EH), and secure using the bolt
(already attached) located on the underside
of the bottom shelf, as shown in gure B.
For natural gas model, follow step 21
20b. Attach the Regulator coupling nut to the LP
cylinder valve.
ATTENTION: For your families safety, do not at-
tempt to light this BBQ until you have reviewed
pages 4-7 of the CENTRO Safety & Care Manual.
All Safety and Leak test MUST BE PERFORMED BY
THE END USER, prior to lighting this BBQ.
19
ASSEMBLY INSTRUCTIONS
20
CF2
A
B
EH
WARNING
Do not store extra propane tanks within BBQ cart.

17
21
ASSEMBLY INSTRUCTIONS
For natural gas model only.
21. Attach the Natural Gas Hose(CB) to the side
burner valve(CC) as shown.
CB
CC