Challenger Optics CO-OLS-MPO12U User manual

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
CO-OLS-MPO12U / Interactive Operating Manual
Best viewed with Adobe Acrobat Reader
052518
1.1 Special Features 2
2.1 Operating Keys 4
2.2.2 Light Source 6
1.2 Specications 2
2.2 Key Function 5
1.4 Charge Method 3
1.3 Package Contents 3
2.2.1 Power ON/OFF 5
1.5 Meter Care 3
1.0 Introduction 2
2.0 Getting Started 4

back to Contents
CO-OLS-MPO12U p 2
ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
1. Introduction
1.1 Special Features
- 12 Fiber
- CW (Continuous Wavelength),
Modulation (270Hz,1KHz, 2KHz) mode
- Compact size, one button operation
- Color LCD for graph display
- Light weight for easy eld use
- Quick start: Minimal warm-up
1.2 Specications
Channels 12 Fiber
Wavelength / Source 850, 1310 nm / DFB
Fiber Type MM
Modulation CW, 270Hz, 1KHz, 2KHz
Output Power >-10 dBm
Output Stability ±0.2 dBm
Optical Connector MPO Flat, unpinned
Battery / Power Rechargeable Lithium-Polymer – 5hr.
Display 2.8” TFT-LCD, 16 bit Color
Operating Temperature -20° ~ +55° C
Weight 13 oz*
Dimensions h / w / d 7 x 3.25 x 1.5 (inches)*
*w/boot

back to Contents
CO-OLS-MPO12U p 3
ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
1.3 Package Contents
Description Quantity
Body 1 ea
Body Rubber Case 1 ea
USB Data cable 1 ea
Charger 1 ea
User’s Manual - USB stick 1 ea
1.4 Charge Method
The CO-OLS-MPO12U has a rechargeable battery. A USB power adapter and
micro USB cable are provided for charging. Typical charge time is three hours.
Charging conditions:
LED Color Conditions for battery charge
Red Charging
Green Fully charged
1.5 Meter Care
Do not subject the CO-OLS-MPO12U to strong impact.
The CO-OLS-MPO12U is not water resistant or waterproof
Do not disassemble.
Always properly clean the ber interfaces before taking a measurement.
Always replace the Dust Cap for dust protection.

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
back to Contents
CO-OLS-MPO12U p 4
2. Getting Started
2.1 Explanation of Operating Keys
Key Function
Backlight Power On/O, Backlight On/O
λ Change wavelength
Hz Change modulation (O, CW, 270Hz, 1Kz, 2KHz)

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
back to Contents
CO-OLS-MPO12U p 5
2.2 Key Function
2.2.1 Power ON / OFF
To turn on and o.
Press the button for more
than 2 seconds, the logo shown
appears. The meter then displays
the channel with the highest
power level.
Press the button for more
than 2 seconds to turn
the power o.
Backlight
Backlight

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
back to Contents
CO-OLS-MPO12U p 6
2.2.2 Light Source
Press to change
modulation.
(O, 270 Hz, 1 KHz, 2 KHz)
Press to change
wavelength.
Hz
λ