Challenger Optics CO-OLS-MPO12 User manual

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
OPERATING MANUAL
1.0 Introduction . . . . . . . . . . . . . . . . 3
1.1 Special Features . . . . . . . . . . . . . 3
1.2 Specications . . . . . . . . . . . . . . 3
1.3 Package Contents. . . . . . . . . . . . . 4
1.4 Charge Method . . . . . . . . . . . . . 4
1.5 Meter Care . . . . . . . . . . . . . . . 4
2.0 Getting Started . . . . . . . . . . . . . . 5
2.1 Explanation of Operating Keys . . . . . . . . 5
2.2 Key Function . . . . . . . . . . . . . . . 6
2.2.1 Power ON / OFF . . . . . . . . . . . 6
2.2.2 Light Source . . . . . . . . . . . . 7
CONTENTS
052518
MPO Optical Light Source
- 12 ber Singlesource
ChallengerOptics
CO-OLS-MPO12

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
Chapter 1.0 - Introduction / 04Chapter 1.0 - Introduction / 03
1. Introduction
1.1 Special Features
- 12 Fiber
- CW (Continuous Wavelength),
Modulation (270Hz,1KHz, 2KHz) mode
- Compact size, one button operation
- Color LCD for graph display
- Light weight for easy eld use
- Quick start: Minimal warm-up
1.2 Specications
Channels 12 Fiber
Wavelength / Source 1310, 1550 nm / DFB
Fiber Type SM
Modulation CW, 270 Hz, 1 KHz, 2 KHz
Output Power > -10dBm
Output Stability ±0.2dBm
Optical Connector MPO Angled, unpinned
Battery / Power Rechargeable Lithium-Polymer – 5hr.
Display 2.8” TFT-LCD, 16 bit Color
Operating Temperature -20° ~ +55° C
Weight 13 oz*
Dimensions h / w / d 7 x 3.25 x 1.5 (inches)*
*w/boot
1.3 Package Contents
Description Quantity
Body 1 ea
Body Rubber Case 1 ea
USB Data cable 1 ea
Charger 1 ea
User’s Manual - USB stick 1 ea
1.4 Charge Method
The CO-OLS-MPO12 has a rechargeable battery. A USB power adapter and
micro USB cable are provided for charging. Typical charge time is three hours.
Charging conditions:
LED Color Conditions for battery charge
Red Charging
Green Fully charged
1.5 Meter Care
Do not subject the CO-OLS-MPO12 to strong impact.
The CO-OLS-MPO12 is not water resistant or waterproof
Do not disassemble.
Always properly clean the ber interfaces before taking a measurement.
Always replace the Dust Cap for dust protection.

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
Chapter 2.1 - Explanation of Operating Keys / 06Chapter 2.1 - Explanation of Operating Keys / 05
2. Getting Started
2.1 Explanation of Operating Keys
Key Function
Backlight Power On/O, Backlight On/O
λ Change wavelength
Hz Change modulation (O, CW, 270Hz, 1Kz, 2KHz)
2.2 Key Function
2.2.1 Power ON / OFF
To turn on and o.
Press the button for
more than 2 seconds, the logo
shown appears. The meter then
displays the channel with the
highest power level.
Press the button for
more than 2 seconds to turn
the power o.
Backlight
Backlight

ChallengerOptics.com
Wavelength Specic Optical Testing and Measurement Equipment
Chapter 2.2 - Key Function / 07
2.2.2 Light Source
Press to change
modulation.
(O, CW, 270Hz, 1KHz, 2KHz)
Press to change
wavelength.
Hz
λ