Champion LD-20 User manual

(1M) 5/04 Printed in U.S.A.
DG007
Pot, Pan and
Utensil Washer
MODEL LD-20
MODEL LD-20 WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• Front-loading, easy action lift door
• Separate wash and rinse tanks
• External pre-rinse and wash down hose
• Self-contained water heating
• Moisture resistant control gauges
• Recirculating wash water
• Adjustable wash and rinse cycles
• Removable filter basket
• Digital Control & Information Center
• Adjustable racking system
• Electric, steam or infrared gas water heating
• Precision engineered spray patterns
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: [phone] Fax: [phone]
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: [phone] Fax: [phone]
www.championindustries.com
Project
Item No.
Quantity
LD-10 SD-20 LD-36 SD-36
OPTIONS
Tank Heat
Steam
Gas
Additional Lift Door and Split Door Models:

Pot, Pan and
Utensil Washer
MODEL LD-20
MODEL LD-20 WASHER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 800/532-8591 • Fax: [phone] • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]
Dimensions shown in inches
101-1/2"
86-1/4"
73"
50"
40"
Door
Opening
Electrical
Control
Panel
Overflow
Connection
Rinse Thermometer
Wash Pressure Gauge
Wash Thermometer
Digital Control and
Information Center
Wash Pump
28-1/2"
Door
Opening
35"
Lift
Height
A
51-1/2"
36"
40"
ge
Hot Water
Connection
6" Dia. Vent
Wash Down
Hose With
Spray Nozzle
Rinse Tank
Drain Valve
Adjustable Legs
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge Stainless steel. All seams
Heliarc welded.
Door
Stainless Steel front loading lift door design for
easy loading and unloading.
Spray Arm Assembly
STAINLESS STEEL spray arm assemblies, with
stainless steel jets and quick-release mechanism for
easy cleaning and reassembly.
Filter
Perforated, removable, Stainless Steel basket.
Water Pump
7 1/2 Hp, 208/240 or 480 volt, 1 phase or 3
phase, 60 cycle with output of 120 gallons per
minute at 35 to 45 P.S.I.
Digital Control & Information Center
110 volt control circuit with push pad operation
of “POWER ON”, “STOP” and “SHORT, MEDIUM
or LONG WASH CYCLES”. A digital display
indicates “TIME REMAINING” for each cycle.
LED’s indicate wash, rinse and unload functions.
A buzzer is also included to provide an audible
indication of time to unload. A pre-programmed
circuit board allows the push pad to be used as a
“DIAGNOSTIC CENTER” by displaying “ERROR
CODES” for ease of troubleshooting.
Gauges
Special moisture resistant design. Wash
temperature, rinse temperature, wash jet pressure.
Wash Tank
Stainless Steel with electric, infrared gas,
steam or steam coil heating, thermostatically
controlled, low-water protected, sloped to
drain with a 40-gallon capacity.
Rinse Tank
Stainless Steel with two (2) 6 kW 208/240 or
480 volt or optional 575 electric booster heaters
to provide 180°F/190°F hot sanitizing rinse.
Racks
Stainless Steel rod, built to match specific washing
requirements.

Washer Automatic washing machine designed to wash all pots, pans and utensils commonly
used in baking and cooking operations.
Cabinet 50" wide x 36" deep x 73" high. Overall height with door open: 100-3/4".
Door opening: 40" wide x 28-1/2" high. Constructed of 12, 14 & 16 gauge, type 304
#3 finish, STAINLESS STEEL . All seams tig-welded, cleaned and polished.
Door Front-loading, split door design for easy loading and unloading. The top half of the
door system rises while the lower half folds down to create a space saving drain
table. Door is interlocked with proximity switch to prevent machine operation while
door is open. Door construction: 16 gauge, type 304 #3 finish, STAINLESS STEEL.
Recirculating Wash Tank Heated by two 6 (2) KW 208/240, 480 or optional 575 volt electric immersion heater,
thermostatically controlled wash temperature and low water protection system. 36
gallons (27 gallons if infrared heated), 14 gauge STAINLESS STEEL,sloped to drain.
Infrared gas and steam heating options available.
Wash Tank Filter Perforated, STAINLESS STEEL basket type, double filter system for increased
effectiveness and easy cleaning without emptying wash tank.
Wash Tank Fill Valve Size 1/2" brass material, solenoid type, automatic.
Wash Tank Drain Valve Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for
automatic option.
Wash Pump 7-1/2 hp, 208/240, 480 or optional 575 volt, 3 phase, 60 cycle. Close coupled; 120
gallons per minute at 35 to 45 psi, mounted on 12 gauge STAINLESS STEEL formed
channel base.
Spray Arm Assemblies Water driven, STAINLESS STEEL spray arm assemblies, top and bottom, with
STAINLESS STEEL jets and quick-release mechanism for easy cleaning and
reassembly.
Sanitizing Rinse Tank STAINLESS STEEL, 10 gallon capacity, with two (2) 6 KW 208/240, 480 or optional
575 volt electric booster heater to provide 180°/190° F hot sanitizing rinse. Uses 5
gallons per 27 second cycle. Infrared gas and steam coil heating options available.
Rinse Supply Valve Size 3/4" brass material, solenoid type, automatic.
Final Rinse Type 304 STAINLESS STEEL tubing with brass compression fittings and brass or
optional STAINLESS STEEL full cone rinse jets.
Control & Information Center 110 volt control circuit with push pad operation of “POWER ON,” “STOP” and “SHORT,
MEDIUM or LONG WASH CYCLES.” A digital display indicates “TIME REMAINING”
for each cycle. LED’s indicated wash, rinse and unload functions. A buzzer is also
included to provide an audible indication when the machine is ready to unload. A
pre-programmed circuit board allows the push pad to be used as a “DIAGNOSTIC
CENTER” by displaying “ERROR CODES” for ease of troubleshooting. Moisture
resistant gauges measure Wash Temperature, Wash Pressure and Rinse
Temperature.
Wash Down Spray Hose Externally mounted spray hose with insulated handle for pre-rinse of heavily soiled
items and easy cleaning and maintenance of machine.
Steam Exhaust Vent Steam exhaust vent 6-3/4" diameter, consisting of 16 gauge rolled collar for PVC
pipe connection bolted to the top of the machine. Machine pre-wired with control
timer for the addition of a fan.
(2M) 6/04 Printed in U.S.A.
SPECIFICATIONS
MODEL LD-20 POT, PAN &
UTENSIL WASHER
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: [phone] Fax: [phone]
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: [phone] Fax: [phone]

Optional Exhaust Fan Draft inducer fan side mounted on exhaust duct to extract excess steam after final
rinse cycle. 300 CFM @ .05" static pressure. 1/10 Hp, 110 volt motor, 1550 RPM.
Racks Customized to hold your specific items. Standard bakery racks include utensil basket
with (2) hold-down lids and (2) bun/sheet pans insert designed to hold (10) pans,
constructed of STAINLESS STEEL rod, mig-welded.
Connections Water Inlet: 120 °F, 3/4" NPT
Water Drain and Overflow: 1-1/4" NPT
Electrical: Two point connection, except 575 volt, which is single point.
Steam Heating Option: 1/2" NPT
Natural or Propane Gas Heating Option: 1/2" NPT.
Weight Crated: 1,100 lbs. Uncrated: 850 lbs.
Services 120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:
480 Volt
3 phase
240 Volt
3 phase
86
79
40
19
18
9
19
18
9
208 Volt
3 phase
1 Steam Supply: Consumption: 95 lbs./hr. @ 15 psi minimum
2 Gas Supply: Consumption: 90,000 BTU/hr. @ 1/2 lb. pressure maximum
Elec. Spec.
Running Amps
Certifications UL and UL Sanitation Listed (all). CUL Listed (electric and steam only).
Steam Wash1
Steam Booster
Maxon Gas Wash2
Electric Booster
Electric Wash
Electric Booster
SPECIFICATIONS
MODEL LD-20 POT, PAN &
UTENSIL WASHER
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: [phone] Fax: [phone]
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: [phone] Fax: [phone]