Basic Instructions
Power On
When you turn on the HBT200 headphones, please press and hold the Power button (7) for
approximately 3 seconds until you hear a sound that indicates that the unit is turned on. At the
same time, the blue light begins to flash.
Power Off
When the headphones are turned on, press and hold the Power button (7) for approximately
3 seconds. The blue light will turn off and you will hear a sound that indicates that the power is
turned off.
Pairing
When you pair the HBT200 for the first time, please make sure that your device supports
bluetooth and that the bluetooth function is turned on.
- Keep the headphones and bluetooth device close to each other during the pairing process.
- Turn on the HBT200, press and hold the Power button (7) for about 3 seconds. The blue light on
the headphones will start flashing.
- Activate Bluetooth on your phone and set it to search for new devices.
- Select ”HBT200”, when the pairing is successful the blue light will flash twice.
Call
When your HBT200 is connected to your phone you can use the headphones to answer your calls.
For answering a call press the ”Power/Call” button (7) once. If you wish to reject a call, press and
hold the Power/Call button for approximately 2 seconds.
Redial
If you wish to redial the latest phonenumber, press the ”Power/Call” button (7) 2 times.
Play/Paus Music
When listening to music, press the ”Play/Pause” (7) button to start or pause the track you are
currently listening to.
Forward/Previous
By pressing ”Previous” (2) or ”Forward/Next” (3) you can change song.
Volume
When listening to music or taking a call and wish to adjust the volume, press ”Volume+”/
”Volume-” (4/5) to increase or decrease the volume.
AUX-in
If you wish to connect your device by 3.5mm audio cable instead of bluetooth, connect the HBT200
(9) with the included 3.5mm audio cable (10) directly to your audio device.
