Changhong Electric UD86GHF3060Ai User manual

1
LED COLOUR TV
MAINTENANCE MANUAL
CHASIS: HLS71EJ-iU
MODEL:UD86GHF3060Ai

2
Please read this manual carefully before maintenance
Chapter1 Safety and notes.................................................................................................................................................. 3
1.1 Installation notes.................................................................................................................................................. 3
1.2 Attention points of operation and using............................................................................................................... 3
1.3 Storage notes........................................................................................................................................................ 3
1.4 Dismantling notes ................................................................................................................................................ 3
1.5 High-voltage warning........................................................................................................................................... 4
Chapter2 whole machine standard and terminal functions ................................................................................................ 4
2.1 Basic standard ...................................................................................................................................................... 4
2.2 Introduction of terminals(practicality photos)...................................................................................................... 5
Chapter3 Main chip functions and the introductions of power supply .............................................................................. 6
3.1 Main IC and functions of HLS71EJ-IU ............................................................................................................... 6
3.2 Pin function description of HLS71EJ-IU chip..................................................................................................... 7
3.2.1 MSD6586 recommended operating power conditons............................................................................... 7
3.2.2 MSH6110A DC-DC brief introduction..................................................................................................... 8
3.2.3 SY8089AAAC Brief introduction............................................................................................................. 8
3.2.4 TPS562201 Brief introduction.................................................................................................................. 8
3.2.4 TPS563201 Brief introduction.................................................................................................................. 9
3.2.4 TPA3136D Brief introduction............................................................................................................. 9
3.2.8 Tuner R842 Brief introduction....................................................................................................... 10
Chapter4 The chassis frame diagram, mainboard power supply systems, mainboard interface definition.......................11
4.1 Power supply system...........................................................................................................................................11
4.1.1 The composition and distribution of the TV power supply......................................................................11
4.1.3 Interface definition.................................................................................................................................. 14
Chapter5 Software upgrade instructions.......................................................................................................................... 14
5.1 Software upgrade method---there are two kinds of upgrade methods................................................................ 14
5.2 upgrade method 1：........................................................................................................................................... 15
5.3 Software upgrade method2：Use a U diskincluding the upgrade programme directly upgrade....................... 19
Chapter6: Classical accident maintenance procedures and examples.............................................................................. 23
6.1 The thinking of don’t boot.................................................................................................................................. 23
6.2 Common problems for your reference............................................................................................................... 23
Chapter7 Factory mode parameter setting instructions and notes.................................................................................... 23
Expert....................................................................................................................................................................... 26
Specific application support..................................................................................................................................... 27
Appendix ：Circuit Schematic Diagram...................................................................................................................... 27

3
Chapter1 Safety and notes
1.1 Installation notes
(1) Please don't beat or rub, scratch the surface of the LED screen heavily, don’t touch it with your hand
casually.
(2) When the screen is dirty, please clean it with absorbent cotton or cotton cloth slightly.
(3) Please clean it timely when water or other viscosity pollution fall, which may make the LED face or
color change.
(4) Please don’t make the LED screen shaked by strong external force.
1.2 Attention points of operation and using
(1) Please unplug the power cable before moving the LED screen.
(2) Please don’t change the original setting of the mainboard’s, if not, the brightness and white balance
etc. may not meet the specification.
(3) The radiation of a long time using in the room temperature is larger than the low temperature.
(4) Please note that the long displaying image may remain at the top when shutdown the machine.
(5) Please avoid the impact from the mobile phone to protect your TV.
1.3 Storage notes
(1)When stored for a long time, please keep the temperature between 0℃to 40℃,don’t expose the TV to
the strong sunlight, the humidity should be less than 85％RH.
(2)Please don’t put your TV under high humidity and high temperature environment, for example, the
temperature: 60℃, and the humidity: 85%RH.
(3)Please don’t put your TV under low temperature environment, for example, the temperature lower
than -25℃.
1.4 Dismantling notes
(1)As LED screen is easy to be damaged, while dismantle, please attention to protect.
(2)Please attention the position of each screw when dismantle, in case to beat the wrong position when
install, if not, it may lead to crack or slide of the face frame.
(3) If you need to dismantle the power board or the mainboard, please attention the position and

4
direction of each line, especially the direction of the screen line, in case of causing accident when install.
Before dismantle, we can take some photos of the line route for the comparison of installing.
(4)After check and maintenance, please assure that there is no foreign body in the machine when install.
1.5 High-voltage warning
The high-voltage of the LED screen is generated by the power supply board, without attention to
exposure to the high voltage, one may meet a serious electricity shock.
Chapter2 whole machine standard and terminal functions
2.1 Basic standard
Item
Standard
TV function
sound system
B/G、D/K、I、M
color system
PAL / SECAM/NTSC
Audio and video
signal input
AV
AV x 1
Audio L/R x 1
aberration signal
YPbPr x 1（Optional）
support to1080P ，Audio L/R x 1,
HDMI
HDMI ×3
Support HDMI 4Kx2K video format
and 3D up to 1080P/3D@60Hz
USB
USB x2
support media player
VGA
VGA x1
Support VGA 4K@30Hz
Video output（ViaAV out）
Output CVBS signal
Output AV signal,Audio L/R x 1
Audio output
Audio output L / R
8W inner speakers for each channel
Power
power supply
AC100V~240V, 50/60Hz
power achievement
requirement for environment
operation temperature
storage temperature
operation humidity
+ 0 ℃~ + 40 ℃，
- 20 ℃~ + 60 ℃
10% ~ 85%
appearance size
W x H x D
1125.9 (H) x 656.8 (V) x 87.9 (D) mm
net weight
no accessory
Kg

5
2.2 Introduction of terminals(practicality photos)
ATTENTION:
1. YPbPr support to 1080p；
2.YPbPr and AVIN use the same port to input audio of R/L;
3.USB1 and USB2 support to USB2.0;
USB2 input
HDMI3 input
Internet input
Speaker
output
Power input
VBO output
HDMI2 input
RF tuner
PC audio
AV1 input
Ypbpr input
AVOUT
input
USB1input
CI Slot
EEPROM programme port
earphone
Optical output
S2 tuner
PC input
HDMI1 input
WIFI port
RF input
Keypad IR input
TCON power input

6
Chapter3 Main chip functions and the introductions of power supply
3.1 Main IC and functions of HLS71EJ-IU
No.
Item no.
Model(EXAMPLE)
Main function
1
UA1
RT9108NBGCP、TPA3136D
amplifier
3
UE2
MSH6110A
12V to 1.05V VDDC_CPU DC-DC
4
UE3
SY8089AAAC、TPS562201
5V to 1.5V DC-DC
5
UE4
LR1117/A-3.3$AZ1117H-3.3T
R$LD1117S33TR$AMS1117-3.
3$LM1117MPX-3.3$NCP1117
ST33T3$SPX1117M3-3.3$CW
1117CB-3.3V
5VS to 3.3VS LDO
6
UE5
LR1117/A-3.3$AZ1117H-3.3T
R$LD1117S33TR$AMS1117-3.
3$LM1117MPX-3.3$NCP1117
ST33T3$SPX1117M3-3.3$CW
1117CB-3.3V
5VA to 3.3VA LDO
7
UE6
ME4953$AO4803$SSF4953
power switch(12VS to 12VA，5VS to 5VA)
8
UE7
MP2225GJ、TPS563201
12VS to 5VS DC-DC
9
UE8
MP2225GJ
12VA to 1.1V DC-DC
11
UM1
MSD6586PYE-8-0087
main ic
12
UM2
THGBMDG5D1LBAIL
EMMC
13
UM3
AT24C64D-SSHM-T
EEPROM（mac address, EDID, CI Plus key）
16
UR3
K4B4G1646E-BCMA
DDR
17
UR4
K4B4G1646E-BCMA
DDR
18
UT1
LR1117/A-3.3$AZ1117H-3.3T
R$LD1117S33TR$AMS1117-3.
3$LM1117MPX-3.3$NCP1117
ST33T3$SPX1117M3-3.3$CW
1117CB-3.3V
5V to 3.3V LDO(for tuner)
19
UW1
PH1102G
NETWORK SOCKET
20
UZ1
RT5047GSP
LNB
25
UL1
ME4953$AO4803$SSF4953
power switch for panel

7
3.2 Pin function description of HLS71EJ-IU chip
3.2.1 MSD6586 recommended operating power conditons
UE8：MP2225GJ
UR3：DDR
UM2：EMMC
UR4：DDR
UE6:AO4803
UL1：AO4803
UM1:MSD6586PYE-8-0087
UT1：LDO 3.3V
UE7：MP2225GJ
UW1:PH1102
G
UM3：EEPROM
UE2:MSH6110A
UE4:LDO 3.3VS
UE5：LD0 3.3VA
UA1：amplifier
UZ1：RT5047GSP

8
3.2.2 MSH6110A DC-DC brief introduction
Pin NO.
Pin Name
I/O
Function
1
EN
I
Enable control Input
2
FB
I
Feedback Voltage Input
3
VRGE5
O
5V Regulator Output（cann’t provide external
current sinke）
4
SDA
I
I2C
5
SCL
I
I2C
6
SW
O
Switch Node of Buck Convert
7
BSR
O
Supply of High Side MOSFET Driver Circuit
8
PVDD
I
Power Supply
9
EPAD
Ground（Back Side）
3.2.3 SY8089AAAC Brief introduction
Pin NO.
Pin Name
I/O
Function
1
EN
I
Enable control.Pull hight to turn on. Do not
float
2
GND
Ground（Back Side）
3
SW
O
Inductor Pin
4
IN
I
Power Supply
5
FB
O
Feedback Voltage Output
3.2.4 TPS562201 Brief introduction

9
3.2.4 TPS563201 Brief introduction
3.2.4 TPA3136D Brief introduction

10
3.2.8 Tuner R842 Brief introduction

11
Chapter4 The chassis frame diagram, mainboard power supply systems,
mainboard interface definition
This chapter mainly introduce the chassis frame diagram, power supply system, interface definition
4.1 Power supply system
Power board has two kinds of output voltage: +12V
4.1.1 The composition and distribution of the TV power supply

12

13
4.1.2 Pin voltage of the voltage adjustor on the mainboard
item No.
UE8
UE4
UE7
UE2
UE3
UE5
UE6
output voltage
1.1V
3.3VS
5VS
1.05VA
1.5VA
3.3VA
12VA/5VA
item No.
UT1
UL1
LZ8
DZ3（-）
QE3
QE4
QL2
output voltage
3.3VA
12VA
12VA
13/18V
12VA
5VA
12VA
item No.
output voltage
LNB:13/18V
12VS-1.5V
12va-1.05V
5VS-3.3VS
5VA-3.3VTU
12VS-12VA
5VS-5VA
12VS-12Vpanel
12VS-5VS
5VA-3.3VA
12VA-1.1V

14
4.1.3 Interface definition
Chapter5 Software upgrade instructions
5.1 Software upgrade method---there are two kinds of upgrade methods
1. Use the USB Tools to upgrade programme, connetion as follow
2. Use a U disk including the programme file to upgrade directly(recommended):
5VEXT EE_WP SCL SDA GND
RF-ON/OFF5V
3D_SYNC
POWER_ON-TV
5VS_RF
USB_DM_P0-R
USB_DP_P0-R
GND
5V
GND
IR
G
K0
GND
STB BL-ADJ
NC BL-O/F
GND NC
NC NC
GND GND
GND GND
12V 12V
12V 12V
R+
R-
L-
L+
WAKE
GND
WIFI_DP
WIFI_DM
5V-WIFI
WIFI_RST
GND GND VCC_PANEL VCC_PANEL VCC_PANEL

15
5.2 upgrade method 1：
Use the USB Tools to upgrade(not recommended)
1. Run ISP_Tool.exe (Ver.：V4.8.0 or later) to upgrade the mboot software
2. Open the ISP_Tool,click “Auto”and set as fallows.

16
3. click “Read”and refer to fallows to ensure your code is right .
3. finally,choose “connect”and click “RUN”,you will see the progress bar,if your mboot burn finish,you
can see “PASS”.

17
Notice:
1.when you click “RUN”,if the “Device Type is eMMC”isn’t appear,it means you are fail;you should
check chip-decoding successfully and ISP_TOOL set is right
2.when you decode successfully, you can’t power down,if not,you must do again.
3.if you burn mboot fail,you can try again or change a computer.
6. Setup SecureCRT.exe to upgrade the main program
6.1 Open the file of SecureCRT.exe, It will display the picture as follow, and select the Serial.

18
6.2 Set the parameter as follow
Notice：Please according to your computer to set the “port”.
6.3 Click “Connect”,It will display the picture as follow:
6.4 Click “Finish”,It will display the window as follow:

19
6.5 reset power，and click “Enter”key on the keyboard of your computer, the window will display as
follow：
7. Copy the right bin file to U disk, the file name is: upgrade_HLS71FJi1_V0.000N.bin ,then insert the
U disk to USB 2.0 port.
8．Input “cu”behind “<< Mstar >>#” in the SecureCRT window.
9. wait,until update success, then power on using RC.
5.3 Software upgrade method2：Use a U diskincluding the upgrade programme
directly upgrade
5.3.1 The main program to upgrade
1. Download the bin file To the root directory of your USB device (Do not change the file
name);Then insert the USB device to USB interface of TV set.

20
2. Press the "SETTING" button on remote control , select the "About" item, press "OK" key to enter
the next step:
3. Then select the "System Upgrade" item, press "OK" key to enter the next step:
4. Then select the "USB Upgrade" item, press "OK" key to enter the next step:
5. Then select the "confirm", then click "OK" button, it will automatically shutdown and then boot upgrade, the
upgrade process can not power off, when upgrade end,TV will automatically reboot.
5.3.2 If you need to update the MAC address (MAC.bin), HDCP KEY (HDCP1.bin/HDCP2.2.bin), CI PLUS KEY
(CIPLUS.bin) and other steps are as follows:
1. Download the bin file To the root directory of your USB device (DO not change the file name);Then insert the
USB device to USB interface of TV set.
2. Press remote control on the "MENU" button, and then press the number "3138" enter the factory menu: