Channel Vision C-0330 User manual

Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
p
roduct with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
p
roof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
[phone] toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-191 rev B
www.channelvision.com
234 Fischer Avenue, Costa Mesa, California 92626 USA
[phone] [phone] [phone] fax
email: [email protected]
C-0330
Bi-directional Amplified Splitter
7
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
56 7 8

2
The is an 8-output amplified splitter with a built-in combiner for
modulated signals. It allows IR signals to pass through the modulator input
to the TV outputs, making it a perfect match for the E2200IR, E3200IR or
E4200IR.
C-0330
Features:
!
!
!
8 Amplified outputs: 4.5dB Gain
Supports 1 modulator input
Allows IR through the modulator input port
!
!
Amplified return path from 5-42MHz
Easy installation
Accessories Included:
Power Supply 75 ohm Terminators
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
MOD IN
Connect modulator here
TV OUTPUTS
Connect TVs here
POWER IN
Connect power supply here
12VDC, 500mA
CABLE IN
Connect the antenna or cable service feed here
Frequency Range 54-1000MHz
Return Loss (I/O) >16dB
IR PASS Yes
CATV FORWARD PATH
7
Specifications: (typical @25º C)
Specifications subject to change without notice.
Frequency Range 5-42MHz
Gain 54-60MHz
60-680MHz
680-1000MHz
3.5dB
4.5dB
4.5dB
4.5dB
5.5dB
5.5dB
5.5dB
+1.0dB
6.5dB
>16dB
>18dB
7.5dB
60ns
12ns
60dBC
60dBC
+23.0 dBmV
160mA
60dBC
60dBC
22ns
6.5dB
Return Loss (I/O)
Isolation
Noise Figure@70 degrees F
Group Delay (54 to 66MHz)
Group Delay (66 to 88MHz)
Group Delay (88 to 1000MHz)
Composite Second Order Distortions
Composite Triple Beat Distortions
Cross Modulation Distortions
Second Hum Modulation
Rated Output Level @160 channels, 6MHz each
Power Consumption
Flatness
CATV RETURN PATH
MIN. MAX.TYP.
5-35MHz
Gain
35-42MHz
-1.0dB
-1.5dB
0dB
-0.5dB
0.5dB
+1.0dB
>16dB
>20dB
20dB
55ns
56dBC
58dBC
>110dB
+43.0 dBmV
75 ohm
65mA
12VDC
53dBC
56dBC
36ns
0dB
Return Loss (I/O)
Nominal Impedance “F” Female
Isolation
Supply Voltage (DC)
Noise Figure@70 degrees F
Group Delay (5 to 10MHz / 36MHz to 42MHz)
Group Delay (10 to 36MHz)
Composite Second Order Distortions
Composite Triple Beat Distortions
Cross Modulation Distortions
Second Hum Modulation
Rated Output Level @2 channels, 6MHz each
Power Consumption
Flatness
RFI Shielding
GENERAL SPECIFICATIONS
MIN. MAX.TYP.
Operation Time Full Time Bypass
Insertion Loss <15.5dB
ITEM MIN. MAX.TYP.
MODULATOR PATH

C
V
HANNEL
ISION
TM
C
V
HANNEL
ISION
TM
Model
P-0321
CATVInput MOD Input
Output
Power
IR Out
Pat. Pending
PartNo. HS-2
-WAYSPLITTER/COMBINER2
5MHz-1GHzAllPort DC passing
CVHANNEL ISION
TM
IN/out
OUT/in OUT/in
Digital CATV
Location
Analog CATV
Location
Modulator
CATV
Channel
Vision
TM
A0511
C-0330
P-0321
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
Input from
Antenna/CATV
RF OUT
RF OUT
DC 15V IN
DC 15V IN
OUTPUT
IR
OUTPUT
IR
CABLE
ANTENNA
ANTENNA + CABLE
ANTENNA + CABLE
VIDEO
AUDIO
LR
B
A
VIDEO
AUDIO
LR
D
C
14
3
2
1234
OUTPUT
IR
OUTPUT
IR
Sat Receiver
IR Emitter
E4200IR
CameraCameraCamera
RF Filter
1 2 3
456
789
0
Power
PartNo. HS-2
-WAYSPLITTER/COMBINER2
5MHz-1GHzAll Port DC passing
CVHANNEL ISION
TM
IN/out
OUT/inOUT/in
Using the C-0330 with the Affinity (P-0321)
The C-0330 can be integrated with the P-0321 to send modulated signals
through a system that has some TVs with digital cable boxes and some TVs
without digital cable boxes. An RF filter can be used to remove the digital
content from the TVs which do not have digital boxes. This allows modulated
channels to be inserted without interference problems. The P-0321 preserves
the digital content for the locations that do have digital boxes. Additional details
regarding the operation of the Affinity model P-0321 can be found in its
installation manual.
6
Power Supplies
not shown
3
Basic Amplified Splitter Application
Connect the C-0330 as shown and locate it at the main distribution point in the
house. The C-0330 will supply the amplified TV signal to 8 TV locations.
TV set TV set
C-0330
TV set TV set
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
56 7 8
Input from
Antenna or CATV
Connect up to 8 TVs
Terminate any unused outputs
Power
Supply

C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
4
Large System Amplified Splitter Application
The C-0330 can be cascaded for situations that require more than 8 outputs.
Each of the 8 outputs of the C-0330 can feed the input of an additional C-0330
creating a system with 64 TV outputs.
(1 of 8 from this slave)
(1 of 8 from this slave)
(1 of 8 from this slave)
Note: For runs of 150’
or less use one of
the Master outputs.
Note: For runs between
150-250’ use one of the
Slave outputs.
TV set
TV set
TV set
TV set
C-0330 (Master)
C-0330 (Slave)
C-0330 (Slave)
C-0330 (Slave)
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
Input from
Antenna/CATV
Use a total of 9 C-0330s to achieve 64 TV outputs.
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
Power Supplies
not shown
Terminate any unused outputs
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
5
Cascaded Application with IR Control
The IR engine built into the E2200IR, E3200IR, and E4200IR can support up
to 8 TV locations with IR receivers. When expanding to more rooms an
IR-4000 can be used as shown to power 8 additional IR receivers. This design
can support up to 15 TVs and 15 IR receivers. Note: any TV location that does
not have IR receiver needs to be using model 3109.DC blocked
C-0330 (Master)
IR-4180
2101
Terminator
IR-4000 IR-4100
IR-4101
IR-4101
C-0330 (Slave)
C-0330
Bi-directional amplifier with active return path
POWER IN
POWER IN
CABLE IN
CABLE IN
TV OUTPUTS
TV OUTPUTS
+4.5 dB
+4.5 dB
12 VDC
12 VDC
MOD IN
MOD IN
1 2 34
5678
Input from
Antenna/CATV
Power Supplies
not shown
CVHANNEL ISION
TM
From IR
engine
IR-4100
IR coax adaptor
To TV
IR receiver
CVHANNEL ISION
TM
Input
IR-4000
IR coax engine
To IR coax
adaptor
IR emitter Pwr
IR-4100
IR-4000
RF OUT
RF OUT
DC 15V IN
DC 15V IN
OUTPUT
IR
OUTPUT
IR
CABLE
ANTENNA
ANTENNA
ANTENNA + CABLE
ANTENNA + CABLE
VIDEO
AUDIO
LR
B
A
VIDEO
AUDIO
LR
D
C
14
3
2
1234
OUTPUT
IR
OUTPUT
IR
Sat Receiver
IR Emitter
E4200IR
CameraCameraCamera
RF Filter
Use DC block
& terminator
on any unused output
TV set
TV set
1 2 3
456
7 8 9
0
Power
123
456
789
0
Power