Channel Vision C-0128D User manual

CHANNEL VISION
Limited Warranty
Channel Vision Technology will repair or replace any defect in
material or workmanship which occurs during normal use of this
product with new or rebuilt parts, free of charge in the USA, for two
years from the date of original purchase. This is a no hassle warranty
with no mail in warranty card needed. This warranty does not cover
damages in shipment, failures caused by other products not supplied
by Channel Vision Technology, or failures due to accident, misuse,
abuse, or alteration of the equipment. This warranty is extended only
to the original purchaser, and a purchase receipt, invoice, or other
proof of original purchase date will be required before warranty
repairs are provided.
Mail in service can be obtained during the warranty period by calling
[phone] toll free. A Return Authorization number must be
obtained in advance and can be marked on the outside of the shipping
carton.
This warranty gives you specific legal rights and you may have other
rights (which vary from state to state). If a problem with this product
develops during or after the warranty period, please contact Channel
Vision Technology, your dealer or any factory-authorized service
center.
500-100 RevB
C-1322
Fan Kit for models:
C-0128D, C-0138D, & C-0150D

2
The C-1322 fan kit is compatible with Channel Vision’s new
designer doors: C-0128D, C-0138D, and C-0150D.
What is included:
Installation:
1. Determine the desired fan location:
The top and bottom sections of the C-0128D,
C-0138D & C-0150D are identical, allowing the
C-1322 fan kit to be installed in either the top
or bottom of the door. Mounting the fan at the
top is recommended for most applications.
Features:
!
!
!
Provides increased airflow through the enclosure
Extenends the life expectancy of heat sensitive electronics
Quick and easy installation
1) 40mm fan
4) Mounting screws
4) Tape dots 1) 12VDC power supply
2) Vent seals
Top
Bottom
C-0150D shown
for reference only 3
2
.
Sealing the vents adjacent to the fan will force air into the fan,
making it more effective.
Install vent seals:
3.
Attach the fan with the screws provided.
Mount the fan:
4.
All compatible doors have a groove for routing the fan wire.
Place the wire in the groove and secure it with the tape dots.
Route the fan wire:
Power supply
connection
Tape dots
Top
Fan
B
o
tt
o
m