Channel Vision 6200 Series User manual

6200-xxx
Flush Mount Single Gang Box Color Camera
0
1

22
The 6200 series color flush mount single gang box cameras are
the perfect solution for surveillance applications where discreet
style is required. Finished with a smoked acrylic facing and choice
of seven different decorative colors, the box blends easily into any
installation background. The compact camera is housed behind the
acrylic facing and features a 1/3” Sony Super HAD CCTV sensor,
550 lines of resolution and a 5.5mm lens for tight viewing angles.
The 6200-Series is weather resistant and suitable for either indoor
or outdoor use.
Camera
Small Screws
Camera Cable
Mount Power Supply
Features:
High quality 1/3” SONY Super HAD CCD sensor
h
550 TV lines of resolution
h
5.5mm lens for tight viewing angles
h
Easy to install in a single gang box
h
Decorative Colors Available
h
White (212), Polished Brass (222), Antique Brass (232), Chrome
(242), Oil Rubbed Bronze (252), Black (282), Satin Nickel (302)
Dimensions
30
30
31
Red (12VDC)
Black (GND)
Yellow (Video)
18.1
14
Model 6200-xxx

3
Model 6200-xxx
Installation:
Attach the camera mount to the bracket supplied with this product
h
Apply double sided gasket between plexiglass and outer plate
h
If necessary, attach the camera’s video output to a coax extension
h
that is long enough to reach your monitor or video distribution
equipment.
If necessary, cut the connector off of the end of the power supply and
h
splice in an extension using crimp-on connectors.
Coax extension
(not included)
Power supply
(included)
To Monitor
or
Video distribution
2-Conductor power
supply extension
(not included)
Crimp-on splice
connectors
(not included)
Power
Video
(BNC Connector)
6200
6200-xxx assembly
Gasket
Outer Plate
Plexiglass
Gasket
6403

500-308 rev B
www.channelvisi o n . c o m
234 Fischer Avenue, Costa Mesa, California 92626 USA
[phone] [phone] [phone] fax
email: [email protected]
Channel Vision Technology will repair or replace any defect in material or workmanship which
occurs during normal use of this product with new or rebuilt parts, free of charge in the USA, for one
year from the date of original purchase. This is a no hassle warranty with no mail in warranty card
needed. This warranty does not cover damages in shipment, failures caused by other products not
supplied by Channel Vision Technology, or failures due to accident, misuse, abuse, or alteration of
the equipment. This warranty is extended only to the original purchaser, and a purchase receipt,
invoice, or other proof of original purchase date will be required before warranty repairs are
provided.
Mail in service can be obtained during the warranty period by calling [phone] toll free.
A Return Authorization number must be obtained in advance and can be marked on the outside of the
shipping carton.
This warranty gives you specific legal rights and you may have other rights (which vary from state to
state). If a problem with this product develops during or after the warranty period, please contact
Channel Vision Technology, your dealer or any factory-authorized service center.
Channel Vision products are not intended for use in medical, lifesaving, life sustaining or critical
environment applications. Channel Vision customers using or selling Channel Vision products for
use in such applications do so at their own risk and agree to fully indemnify Channel Vision for any
damages resulting from such improper use or sale.
1
*Specifications:
Image Sensor: 1/3” SONY Super HAD CCD
Picture Elements: NTSC: 768x494
Resolution: 550 lines
S/N Ratio: More than 48 dB
Min Illumination: 0.2 LUX @ F2.0
Electronic Shutter: 1/60s - 1/100,000s
Iris Control: Automatic
White Balance: Automatic
Gamma Characteristic: 0.45
Lens Focal Length: 5.5mm
Sync. System: Internal
Power Requirements: 12VDC
Power Consumption: 65mA
Video Output: 1 Vp-p @ 75 ohms
Dimensions: 1.18” x 1.18” x 0.55” (30 x 30 x 18mm), camera
only
Operating Temp: -10°C to 50°C (14°F to 122°F)
*Specifications subject to change without notice.