AC Switching Power supply Specification CP- S1200.
www.chargery.com
page 2 total 4
1. Model:
::
:CP-S1200
2. Application
The Powerful digital programming power supply is applied to any device with DC in 12-24V,
It is designed special for high power charger and balancer charger applied to RC model.
3. Features:
::
:
Optimize and debug repeatedly in past 14 months, S1200 is released finally. The powerful
supply can output 1200W at AC90V~265V and in a so small size. The key is new technical
help the unit to realize up to 94% of efficiency incredibly, and the internal temperature is
still under 80℃. The following are many new features:
Active PFC:smaller AC input current less interference, and Conform to European
Commission Regulation no 278/2009 and Energy Star Version 2.0
AC 90-265V worldwide use: need not any alternative switcher, worldwide safe operation.
Up to 94% of convert efficiency.
Programming output voltage from 11.5 to 24.5V, suitable for more application
Digital display output voltage and current on time.
Over current, over voltage, over load and over temperature protection, and resume
automatically
Short-circuit protection on output, safer and more reliable.
3 Intelligent cooling fans turned on at over 50℃
3 outputs can do more chargers simultaneously.
ZVS/ZCS and Synchronous Rectification assure
the highest efficiency.
High power density: 521W/Kg
Start at no load or full load perfectly,
Approved by CE
24 months warranty
4. Environment Requirements
Ambient Temperature : -10--45℃
Ambient Humidity :5%--95%
Storage Temp. :-20℃--70℃
Storage Humidity :30%--90%