Chauvet TFX-950CM User manual

CHAUVET, 3000 N 29TH CT, HOLLYWOOD, FL 33020 U.S A.
[phone] – [phone]
FAX [phone]
www.chauvetlighting.com
Stage Wash™ 950 Pack
PK1-Stage
QUICKSTART
TFX
-
SWF
TFX-950CM
TFX-950CM
STAND-BY FUNCTION MODE
TFX- WFS

2 www.chauvetlighting.com
What is included
The PK1-Stage package consists of the following Chauvet professional lighting products.
¾2 x Stage Wash™ 950 (TFX-950CM)
¾1 x Stage Wash™ Foot Controller (TFX-SWF)
¾1 x DMX-10 (33’ DMX cable)
Additionally, you will find the following User Guides:
Stage Wash™ 950 User Guide
Stage Wash™ Foot Controller User Guide
Setup Both Stage Wash™ 950 fixtures may need to be lamped. Refer to each fixture’s individual manual for
detailed lamping instructions. Once lamped, proceed to mount the fixtures safely and securely to your
mounting hardware. Please refer to your fixture’s manual for detailed rigging and mounting
instructions if necessary.
Recommended Configuration (master/slave)
Rear Fixture
DMX Output
DMX Input
DMX-10
3-pin, XLR cable
Fixture # 1
Rear Fixture
TFX-SWF Foot Controlle
r
Fixture # 2
Located at rear of fixture
Continue to other fixtures…
DMX Output
STAND-BY FUNCTION MODE
TFX- WFS
Please do not connect to a DMX
controller while using in Master/Slave
mode with the TFX-SWF Foot
Controlle
r

www.chauvetlighting.com 3
Operation Disconnect any DMX controller device to the Stage Wash™. Connect only the TFX-SWF Foot
Controller and proceed to daisy chain other units using the DMX-10 cable.
The TFX-SWF pedals will function in the manner described in the following table.
Stand By Mode Function
Auto
Led 1: Off
Led 2: Off Fixtures will run built in programs automatically
Audio
Led 1: Off
Led 2: On Fixtures will run built in programs to the sound.
Manual
Led 1: On
Led 2: Off
Full/CB:
Hold: pedal to set to Full On
Bump: Pedal to set dimming levels
Blackout
Manual
Led 1: On
Led 2: On
Full/CB:
Hold: pedal to set dimming levels
Release: Pedal to set to Full On
STILL CAN’T GET IT TO WORK?
GIVE US A CALL [phone] Ext 4 (9:00AM – 5:00PM EST)