Chauvet Q-WASH 360Z-LED User manual

Quick Reference Guide

Q-Wash 360Z-LED QRG
Page 2 of 8
About this
Guide
The Q-Wash 360Z-LED Quick Reference Guide (QRG)
only contains the
product
’s connection and mounting information as well as the menu options
and the DMX values.
Disclaimer
•This Quick Reference Guide DOES NOT replace the product’s user
manual, which you can download from the CHAUVET® Web site
(www.chauvetlighting.com).
•You must read ALL the disclaimers and safety notes in this document
as well as those in the product’s user manual before installing,
operating, or maintaining this product.
Safety Notes
•DO NOT open this fixture unless instructed. It contains no user
serviceable parts.
•DO NOT look at the light source when this fixture is on.
•DO NOT touch the fixture when it is operating because it may be hot.
•DO NOT cover the ventilation slots when the fixture is operating to
avoid internal overheating.
•DO NOT install or operate this fixture where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
•DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
•DO NOT carry this fixture from the head; use the handles instead.
•DO NOT mount this fixture overhead without using a safety cable.
•DO NOT operate this fixture outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
•DO NOT operate this fixture if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
•DO NOT connect this fixture to a dimmer or rheostat.
•ONLY connect this fixture to a grounded and protected circuit.
What is
Included
•One Q-Wash 360Z-LED
•One IEC power cord with Edison plug (US market)
•One safety cable
•Two omega brackets
•Warranty Card
•Quick Reference Guide

Q-Wash 360Z-LED QRG
Page 3 of 8
Features
•11 or 15-channel RGBW LED moving yoke wash fixture
•Pan: 540°
•Tilt: 270°
•RGBW color static mixing with or without DMX control
•Vector speed channel for RGBW color mixing
•Variable zoom
•Variable electronic strobe
•Continuously variable electronic dimmer (0~100%)
•Built-in automated programs
•Remote fixture reset and vector speed channel
•255-step fully customizable program
•Recall auto or custom programs via control panel or DMX
•Color temperature presets (3,200~10,000 K)
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Fuse
Replacement
1) Disconnect the unit from the power outlet.
2) With a flat head screwdriver, wedge the fuse holder out of its housing
and remove the blown fuse from its holder.
3) Replace the blown fuse with a fuse of the exact same type and rating.
4) Insert the fuse holder back in its place, and reconnect power.
Mounting
Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Floor Mounting
Overhead Mounting
C Clamps (not included)
Safety cable (included)
Omega brackets (included)

Q-Wash 360Z-LED QRG
Page 4 of 8
Menu Options
1st Level
2nd Level
3rd Level
Description
INTRO
ADDRESS
001~512
Selects a starting DMX address
RESET
NO/YES
Resets the fixture’s custom settings
FAN
HIGH
Select the fan’s operation mode.
NOTE: Fixture’s controller will force the fan to High if the
fixture’s internal temperature becomes too high, despite any
manual or DMX setting
NORMAL
LOW
AUTO
RUN
DMX512
Selects DMX running mode
AUTO 1
Selects the first automatic program
AUTO 2
Selects the second automatic program
CUSTOM
Selects the user customizable program
SLAVE
Selects the Slave running mode
TEST
Starts the fixture’s test sequence
CHANNELS
BASIC
Selects the 11-channel DMX mode
ADVANCED
Selects the 15-channel DMX mode
DISPLAY
60 CLOSE
Turns off the display after 60 seconds
BRIGHT
Keeps the display on
KEYLOCK
NO/YES
Activates/deactivates the control panel password
DIMMER
DIMMER 4~1
Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER 0
Linear dimmer
INFO
EDITION
Shows the version of the installed S/W
INVERT
Pan
NORMAL/
REVERSE
Defines the pan direction
Tilt
Defines the tilt direction
Dimmer
Defines the direction of the dimmer fader
Use
NO/YES
Activates the changes
RANGE
P/Start
000~255
Sets the pan start point (restricted range)
P/Finish
Sets the pan end point (restricted range)
T/Start
Sets the tilt start point (restricted range)
T/Finish
Sets the tilt end point (restricted range)
Use
Activates the changes
SPECIAL
Black delay
NO/YES
Activates the move-in black delay (3 s)
Reset
DMX
The DMX controller can reset the fixture
SYSTEM
The control panel can reset the fixture
Power NORMAL/
HIGH
LEDs illuminate at normal or high intensity
NOTE: Fixture will return to Normal if temperature becomes too
high
Color
UC
White output matches that of older fixtures
RGBTOW
White output set by RGB-W
OFF
White output defined by RGBW faders
Fan
DMX
The DMX controller can set the fan speed
SYSTEM
The control panel can reset the fan speed
EDIT
STEP
000~255
Selects the program step
PAN
Selects the pan position
TILT
Selects the tilt position
SPEED
Selects the pan/tilt speed
RED
Combines red, green, blue, and white to obtain a custom color
GREEN
BLUE
WHITE
Continues in the next page

Q-Wash 360Z-LED QRG
Page 5 of 8
Continued from previous page
1st Level
2nd Level
3rd Level
Description
EDIT (Cont.)
DIMMER
000~255
Selects the dimmer value
STROBE
Selects the strobe frequency and mode
ZOOM
Select the zoom position
DIMSPEED
Selects the dimmer speed
TIME
Selects the step duration
USE
No/Yes
Activates the changes
EXTRA
PASSWORD
****
Opens the Extra menu (see below)
Extra Menu
1st Level
2nd Level
3rd Level
4th Level
Description
Calib
3200 K
Red
000~255 Sets color temperature for Macro > White 1
Green
Blue
3400 K
Red
000~255 Sets color temperature for Macro > White 2
Green
Blue
4200 K
Red
000~255 Sets color temperature for Macro > White 3
Green
Blue
4900 K
Red
000~255 Sets color temperature for Macro > White 4
Green
Blue
5600 K
Red
000~255 Sets color temperature for Macro > White 5
Green
Blue
5900 K
Red
000~255 Sets color temperature for Macro > White 6
Green
Blue
6500 K
Red
000~255 Sets color temperature for Macro > White 7
Green
Blue
7200 K
Red
000~255 Sets color temperature for Macro > White 8
Green
Blue
8000 K
Red
000~255 Sets color temperature for Macro > White 9
Green
Blue
8500 K
Red
000~255 Sets color temperature for Macro > White 10
Green
Blue
10000 K
Red
000~255 Sets color temperature for Macro > White 11
Green
Blue
RGB-W
Red
000~255 Sets color temperature for Special > Color > RGBtoW
Green
Blue
Default
Default
No/Yes
N/A
Defaults the fixture to factory settings

Q-Wash 360Z-LED QRG
Page 6 of 8
DMX Values
BASIC
Channel
Function
Value
Percent/Setting
1
Pan
000 ó255
0~540º
2
Tilt
000 ó255
0~270º
3
Red
000 ó255
0~100%
4
Green
000 ó255
0~100%
5
Blue
000
ó
255
0~100%
6
White
000 ó255
0~100%
7 Power and Color
Macro
000 ó005
006 ó010
011 ó030
031 ó050
051 ó070
071 ó090
091 ó110
111 ó130
131 ó150
151 ó170
171 ó200
201 ó205
206 ó210
211 ó215
216 ó220
221 ó225
226 ó230
231 ó235
236 ó240
241 ó245
246 ó250
251 ó255
No function
High power
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down B: 100%
R: Up G: 0% B: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1: 3200 K
White 2: 3400 K
White 3: 4200 K
White 4: 4900 K
White 5: 5600 K
White 6: 5900 K
White 7: 6500 K
White 8: 7200 K
White 9: 8000 K
White 10: 8500 K
White 11: 10,000 K
8
Dimmer
000 ó255
0~100%
9 Strobe
000 ó009
010 ó255
No function
01~20 Hz
10
Zoom
000 ó255
8~29º
11 Control
000 ó019
020 ó039
040 ó059
060 ó079
080 ó099
100 ó119
120 ó139
140 ó149
150 ó159
160 ó169
170 ó179
180 ó199
200 ó219
220 ó255
No function
Pan/tilt black activation
Pan/tilt black deactivation
Automatic fan speed
Slow fan speed
Normal fan speed
High fan speed
Auto program 1 (3 s activation delay)
Auto program 2 (3 s activation delay)
Test (3 s activation delay)
Custom program (3 s activation delay)
No function
Reset (3 s activation delay)
No function

Q-Wash 360Z-LED QRG
Page 7 of 8
ADVANCED
Channel
Function
Value
Percent/Setting
1
Pan
000 ó255
0~540º
2
Pan Fine
000 ó255
Fine movement control
3
Tilt
000
ó
255
0~270º
4
Tilt Fine
000 ó255
Fine movement control
5
Pan/Tilt Speed
000 ó255
Fast~Slow
6
Red
000 ó255
0~100%
7
Green
000 ó255
0~100%
8
Blue
000 ó255
0~100%
9
White
000 ó255
0~100%
10 Power and Color
Macro
000 ó005
006 ó010
011 ó030
031 ó050
051 ó070
071 ó090
091 ó110
111 ó130
131 ó150
151 ó170
171 ó200
201 ó205
206 ó210
211 ó215
216 ó220
221 ó225
226 ó230
231 ó235
236 ó240
241 ó245
246 ó250
251 ó255
No function
High power
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down B: 100%
R: Up G: 0% B: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1: 3200 K
White 2: 3400 K
White 3: 4200 K
White 4: 4900 K
White 5: 5600 K
White 6: 5900 K
White 7: 6500 K
White 8: 7200 K
White 9: 8000 K
White 10: 8500 K
White 11: 10,000 K
11
Dimmer
000 ó255
0~100%
12 Strobe
000 ó009
010 ó255
No function
01~20 Hz
13
Zoom
000 ó255
8~29º
14 Dimmer Speed
000 ó009
010 ó029
030 ó069
070 ó128
130 ó189
190 ó255
Set dimmer speed from control panel
Linear dimmer
Non-linear dimmer (fastest)
Non-linear dimmer
Non-linear dimmer
Non-linear dimmer (slowest)
15 Control
000 ó019
020 ó039
040 ó059
060 ó079
080 ó099
100 ó119
120 ó139
140 ó149
150 ó159
160 ó169
170 ó179
180 ó199
200 ó219
220 ó255
No function
Pan/tilt black activation
Pan/tilt black deactivation
Automatic fan speed
Slow fan speed
Normal fan speed
High fan speed
Auto program 1 (3 s activation delay)
Auto program 2 (3 s activation delay)
Test (3 s activation delay)
Custom program (3 s activation delay)
No function
Reset (3 s activation delay)
No function

Q-Wash 360Z-LED QRG
Page 8 of 8
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Programming
For details on how to program this product, please refer to the product’s
user manual.
Password
After being prompted to enter the password, press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Contact Us
World Headquarters
General Information CHAUVET®
5200 NW 108th Avenue
Sunrise, FL 33351
Voice: [phone]
Fax: [phone]
Toll free: [phone]
Technical Support Voice: [phone] (Press 4)
Fax: [phone]
World Wide Web www.chauvetlighting.com
Q-Wash 360Z-LED QRG – Rev. 01c
© Copyright 2010 CHAUVET®
All rights reserved
Printed in the P. R. C.