Chauvet Vivid 4 X4 User manual

User Manual

Table of Contents
Vivid 4 X4 User Manual Rev. 1
i
TABLE OF CONTENTS
1. Before You Begin....................................................................... 1
What Is Included ........................................................................................... 1
Claims........................................................................................................... 1
Text Conventions.......................................................................................... 1
Symbols ........................................................................................................ 1
Disclaimer ..................................................................................................... 1
Safety Notes.................................................................................................. 2
2. Introduction ................................................................................ 3
Product Description....................................................................................... 3
Features......................................................................................................................... 3
Additional Products........................................................................................................ 3
Optional Accessories ..................................................................................................... 3
Available Signal and Power Cables............................................................................... 3
Product Overview.......................................................................................... 4
Pixels per Panel............................................................................................ 5
Product Dimensions...................................................................................... 6
3. Setup ........................................................................................... 7
AC Power...................................................................................................... 7
AC Plug.......................................................................................................................... 7
Power Linking................................................................................................................. 7
4. Mounting..................................................................................... 8
Orientation..................................................................................................... 8
Truss Installation........................................................................................... 8
RB-F50CM Rig Bar Dimensions ................................................................... 9
RB-F100CM Rig Bar Dimensions ................................................................. 9
Rig Bar/Panel Assembly ............................................................................... 10
Alternative Rig Bar/Panel Assembly .............................................................................. 11
Mounting to Truss with Chauvet CT-APP ..................................................... 11
5. Creating a Modular Design........................................................ 12
Vertically Joining the Panels......................................................................... 12
Vertical Panel Connection.............................................................................................. 13
Horizontally Joining the Panels..................................................................... 14
Horizontal Panel Connection.......................................................................................... 14
6. Connecting and Cabling............................................................ 15
Testing Signal and Power Connections........................................................ 15
Using the Vivid 4 Test Button........................................................................ 15
Connecting Power and Signal Cables........................................................... 16
Connecting the Signal Between Joined Panels ............................................................. 16
Connecting the Power Between Joined Panels............................................................. 17
7. LED Module Care and Replacement......................................... 18
Vivid 4 Module............................................................................................... 18
LED Lot Numbers........................................................................................................... 18
A and B Modules............................................................................................................ 18
Vivid 4 LED Module Removal ........................................................................................ 19
8. Panel Configuration................................................................... 20
Removing and Installing the Handles............................................................ 20
Accessing the Service Module...................................................................... 20
9. Typical Installation..................................................................... 21
10. Operation .................................................................................. 22

Vivid 4 X4 User Manual Rev. 1
Table of Contents
ii
Additional Hardware and Software................................................................ 22
About NovaLCT-Mars ................................................................................... 22
Description..................................................................................................................... 22
11. Technical Information.............................................................. 23
Vivid 4 Maintenance...................................................................................... 23
Returns.......................................................................................................... 23
12. Technical Specifications ......................................................... 24
1. Antes de empezar....................................................................... 25
Qué va incluido ............................................................................................. 25
Reclamaciones.............................................................................................. 25
Convenciones del manual............................................................................. 25
Símbolos....................................................................................................... 25
Exención de responsabilidad........................................................................ 25
Notas de seguridad....................................................................................... 26
2. Introducción................................................................................ 27
Descripción del producto............................................................................... 27
Características............................................................................................................... 27
Productos adicionales.................................................................................................... 27
Accesorios opcionales ................................................................................................... 27
Cables de alimentación y señal disponibles .................................................................. 27
Vista general del producto ............................................................................ 28
Píxeles por panel .......................................................................................... 29
Dimensiones del producto............................................................................. 30
3. Instalación................................................................................... 31
Corriente alterna ........................................................................................... 31
Enchufe CA.................................................................................................................... 31
Alimentación en cadena................................................................................................. 31
4. Montaje........................................................................................ 32
Orientación.................................................................................................... 32
Instalación de truss....................................................................................... 32
Dimensiones de la Rig Bar RB-F50CM......................................................... 33
Dimensiones de la Rig Bar RB-F100CM....................................................... 33
Rig Bar/Ensamblaje del panel....................................................................... 34
Rig Bar/Ensamblaje alternativo del panel...................................................................... 35
Montaje en truss con Chauvet CT-APP........................................................ 35
5. Creación de un diseño modular................................................ 36
Unir los paneles verticalmente...................................................................... 36
Conexión del panel vertical............................................................................................ 37
Unir los paneles horizontalmente.................................................................. 38
Conexión del panel horizontal........................................................................................ 38
6. Conectar (cablear) todos los Vivid 4........................................ 39
Probar la señal y las conexiones de alimentación........................................ 39
Utilizar el botón de prueba del Vivid 4........................................................... 39
Conectar los cables de alimentación y señal................................................ 40
Conectar la señal entre paneles unidos......................................................................... 40
Conectar la alimentación entre paneles unidos ............................................................. 41
7. Cuidados y sustitución del módulo LED ................................. 42
Módulo LED del Vivid 4................................................................................. 42
Números de lote LED..................................................................................................... 42
Módulos A y B................................................................................................................ 42
Quitar el módulo LED del Vivid 4................................................................................... 43

Table of Contents
Vivid 4 X4 User Manual Rev. 1
iii
8. Configuración del panel ............................................................ 44
Quitar y instalar los asas............................................................................... 44
Acceso al módulo de servicio........................................................................ 44
9. Instalación típica........................................................................ 45
10. Funcionamiento........................................................................ 46
Hardware y software adicional...................................................................... 46
Acerca de NovaLCT-Mars............................................................................. 46
Descripción .................................................................................................................... 46
11. Información técnica ................................................................. 47
Mantenimiento del Vivid 4............................................................................. 47
Devoluciones................................................................................................. 47
12. Especificaciones técnicas....................................................... 48
1. Avant de commencer................................................................. 49
Contenu......................................................................................................... 49
Réclamations ................................................................................................ 49
Conventions manuelles................................................................................. 49
Symboles ...................................................................................................... 49
Clause de Non-Responsabilité...................................................................... 49
Consignes de Sécurité.................................................................................. 50
2. Introduction ................................................................................ 51
Description de l'appareil................................................................................ 51
Caractéristiques............................................................................................................. 51
Appareils supplémentaires............................................................................................. 51
Accessoires optionnels .................................................................................................. 51
Câbles de signal et d'alimentation disponibles .............................................................. 51
Vue d'ensemble de l'appareil........................................................................ 52
Pixels par panneau ....................................................................................... 53
Dimensions de l'appareil............................................................................... 54
3. Installation .................................................................................. 55
Alimentation CA ............................................................................................ 55
Prise CA......................................................................................................................... 55
Chaînage électrique....................................................................................................... 55
4. Fixation........................................................................................ 56
Orientation..................................................................................................... 56
Installation sur treillis..................................................................................... 56
Dimensions de la Rig Bar RB-F50CM........................................................... 57
Dimensions de la Rig Bar RB-F100CM......................................................... 57
Assemblage de la Rig Bar et du panneau..................................................... 58
Autre assemblage de la Rig Bar et du panneau ............................................................ 59
Montage sur pont Truss avec pince Chauvet CT-APP ................................. 59
5. Création d'une configuration modulaire.................................. 60
Assemblage vertical des panneaux .............................................................. 60
Connexion verticale des panneaux................................................................................ 61
Assemblage horizontal des panneaux.......................................................... 62
Connexion horizontale des panneaux............................................................................ 62
6. Connexion et câblage................................................................ 63
Test des connexions de signal et d'alimentation........................................... 63
Utilisation du bouton Test du Vivid 4............................................................. 63
Connexion des câbles d'alimentation et de signal........................................ 64
Connexion du signal entre des panneaux assemblés.................................................... 64
Connexion de l'alimentation entre des panneaux assemblés........................................ 65

Vivid 4 X4 User Manual Rev. 1
Table of Contents
iv
7. Entretien des modules LED....................................................... 66
Module LED Vivid 4....................................................................................... 66
Numéros de lot LED....................................................................................................... 66
Modules A et B............................................................................................................... 66
Dépose de module LED du Vivid 4................................................................................ 67
8. Configuration du panneau......................................................... 68
Retrait et installation des poignées............................................................... 68
Accès au module de service......................................................................... 68
9. Installation type.......................................................................... 69
10. Utilisation.................................................................................. 70
Matériel et logiciel additionnels..................................................................... 70
A propos du NovaLCT-Mars ......................................................................... 70
Description..................................................................................................................... 70
11. Informations techniques.......................................................... 71
Entretien du Vivid 4....................................................................................... 71
Renvois......................................................................................................... 71
12. Spécifications techniques....................................................... 72
1. Erste Schritte.............................................................................. 73
Packungsinhalt.............................................................................................. 73
Schadensmeldung ........................................................................................ 73
Textkonventionen.......................................................................................... 73
Symbole........................................................................................................ 73
Haftungsausschluss...................................................................................... 73
Sicherheitshinweise ...................................................................................... 74
2. Einleitung.................................................................................... 75
Produktbeschreibung.................................................................................... 75
Eigenschaften ................................................................................................................ 75
Zusätzliche Geräte......................................................................................................... 75
Optionales Zubehör........................................................................................................ 75
Verfügbare Signal- und Stromkabel............................................................................... 75
Produktübersicht........................................................................................... 76
Pixel pro Panel.............................................................................................. 77
Abmessungen des Produkts......................................................................... 78
3. Einrichten des Geräts................................................................ 79
Wechselstrom ............................................................................................... 79
Wechselstromstecker..................................................................................................... 79
Serienschaltung der Geräte........................................................................................... 79
4. Montage....................................................................................... 80
Montagerichtung ........................................................................................... 80
Montage an Traversen.................................................................................. 80
Abmessungen des RB-F50CM Rig Bar ........................................................ 81
Abmessungen des RB-F100CM Rig Bar ...................................................... 81
Rig Bar/Panel-Baugruppe............................................................................. 82
Alternative Rig Bar/Panel-Baugruppe............................................................................ 83
Befestigung an einem Gerüst mit Chauvet CT-APP..................................... 83
5. Erstellung eines modularen Designs....................................... 84
Vertikaler Zusammenbau der Panels............................................................ 84
Vertikaler Zusammenbau der Panels............................................................................. 85
Horizontaler Zusammenbau der Panels........................................................ 86
Horizontaler Zusammenbau der Panels......................................................................... 86
6. Zusammenschluss und Verkabelung....................................... 87

Table of Contents
Vivid 4 X4 User Manual Rev. 1
v
Testen der Signal- und Stromverbindungen ................................................. 87
Verwendung der Test-Taste des Vivid 4....................................................... 87
Anschließen der Strom- und Signalkabel...................................................... 88
Anschließen der Signalkabel zwischen miteinander verbundenen Panels.................... 88
Anschließen der Stromkabel zwischen miteinander verbundenen Panels .................... 89
7. Pflege und Austausch von LED-Modulen................................ 90
Vivid 4-Modul ................................................................................................ 90
LED-Chargennummern.................................................................................................. 90
A- und B-Modulen.......................................................................................................... 90
Austausch des Vivid 4 LED-Moduls............................................................................... 91
8. Panel-Konfiguration................................................................... 92
Entfernen und Montieren der Griffe............................................................... 92
Zugreifen auf das Service-Modul.................................................................. 92
9. Typische Installation.................................................................. 93
10. Betrieb....................................................................................... 94
Zusätzliche Befestigungsmittel und Software ............................................... 94
Über die NovaLCT-Mars............................................................................... 94
Beschreibung................................................................................................................. 94
11. Technische Informationen....................................................... 95
Wartung des Vivid 4...................................................................................... 95
Reklamationen.............................................................................................. 95
12. Technische Daten..................................................................... 96
1. Voordat tu begint........................................................................ 97
Wat is er inbegrepen..................................................................................... 97
Claims........................................................................................................... 97
Conventies van deze handleiding................................................................. 97
Symbolen...................................................................................................... 97
Disclaimer ..................................................................................................... 97
Veiligheidsinstructies..................................................................................... 98
2. Inleiding....................................................................................... 99
Productbeschrijving....................................................................................... 99
Eigenschappen .............................................................................................................. 99
Extra producten.............................................................................................................. 99
Optionele accessoires.................................................................................................... 99
Beschikbare signaal- en voedingskabels....................................................................... 99
Productoverzicht ........................................................................................... 100
Pixels per paneel........................................................................................... 101
Afmetingen van het product.......................................................................... 102
3. Instelling...................................................................................... 103
AC-stroom..................................................................................................... 103
AC Plug.......................................................................................................................... 103
Power Linking................................................................................................................. 103
4. Montage....................................................................................... 104
Oriëntatie....................................................................................................... 104
Spantinstallatie.............................................................................................. 104
RB-F50CM Rig Bar-afmetingen.................................................................... 105
RB-F100CM Rig Bar-afmetingen.................................................................. 105
Montage van de Rig Bar/het paneel.............................................................. 106
Alternatieve montage van de Rig Bar/het paneel........................................................... 107
Spantmontage met Chauvet CT-APP........................................................... 107
5. Creëren van een modulair ontwerp.......................................... 108

Vivid 4 X4 User Manual Rev. 1
Table of Contents
vi
Verticaal samenvoegen van de panelen....................................................... 108
Verticale paneelverbinding............................................................................................. 109
Horizontaal samenvoegen van de panelen................................................... 110
Horizontale paneelverbinding......................................................................................... 110
6. Verbinden en bekabelen............................................................ 111
Testen van signaal- en stroomaansluitingen................................................. 111
Gebruik van de testknop van de Vivid 4........................................................ 111
Aansluiten van stroom- en signaalkabels...................................................... 112
Het signaal aansluiten tussen de samengevoegde panelen.......................................... 112
Het vermogen aansluiten tussen de samengevoegde panelen..................................... 113
7. Verzorging en vervanging van de LED-module....................... 114
Vivid 4 LED-module ...................................................................................... 114
Lot-nummers van de LED.............................................................................................. 114
A- en B-modules ............................................................................................................ 114
Vivid 4 LED-moduleverwijdering.................................................................................... 115
8. Paneelconfiguratie..................................................................... 116
De handgrepen verwijderen en installeren.................................................... 116
Toegang tot de servicemodule...................................................................... 116
9. Gebruikelijke Vivid 4-installatie ................................................ 117
10. Werking..................................................................................... 118
Extra apparatuur en software........................................................................ 118
Over NovaLCT-Mars..................................................................................... 118
Beschrijving.................................................................................................................... 118
11. Technische informatie............................................................. 119
Onderhoud van de Vivid 4............................................................................. 119
Retouren ....................................................................................................... 119
12. Technische specificaties......................................................... 120
13. Contact Us ................................................................................ 121

1
Before You Begin
Vivid 4 X4 User Manual Rev. 1
1. Before You Begin
What Is Included
Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Symbols
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However,
Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,
damage or disruption caused by any errors or omissions in this document, whether such errors or
omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the
content of this document without any obligation to notify any person or company of such revision, however,
Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest
version from www.chauvetdj.com.
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2017 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States ofAmerica.
CHAUVET, the Chauvet logo, and Vivid 4 are registered trademarks or trademarks of Chauvet & Sons LLC
(d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and
product names and logos referred to herein may be trademarks of their respective companies.
• 4 Vivid 4
• 1 Seetronic Powerkon®power cord
• 4 Seetronic Powerkon®power linking cords
• 4 Seetronic Etherkon®signal linking cords
• Road Case
• Warranty Card
• User Manual
Convention Meaning
1–512 Arange of values
50/60 A set of values of which only one can be chosen
Settings A product function or menu option
<ENTER> A key to be pressed on the product’s control panel
Symbol Meaning
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.

2
Vivid 4 X4 User Manual Rev. 1
Before You Begin
Safety Notes
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Always make sure that the voltage of the outlet to which you are connecting the product is
within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP30)To prevent risk of fire or shock, do not expose the
product to rain or moisture.
• Alwaysinstall the productina location with adequate ventilation,at least 20 in (50 cm) from
adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Never carry the product from the power cord.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at
higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Keep this User Manual for future use. If you sell the product to someone else, be sure that
they also receive this document.

3
Introduction
Vivid 4 X4 User Manual Rev. 1
2. Introduction
Product Description
The Vivid 4 is a video wall system which runs on the Novastar control protocol. The Vivid 4 is a 1 meter by
1 half meter LED video panel that is ideal for both the installation and rental markets.
Features
• Modular video panel vividly displays content without the need of bulky media servers
• Multiple magnets and positioning pins effortlessly allow a tool free, one-man setup
• Elongated size with multiple Speego connectors sets up 2x faster than other panels
• Creates a perfect DJ façade and seamlessly integrates with Serato for displaying music videos
• Panels can be suspended vertically or horizontally offering different aspect ratio options
• Dual power supplies improve reliability and ensure downstream panels don’t lose signal
• Black body LEDs accurately reproduce high-contrast videos
• Intelligent modules with dedicated memory improve the image quality and simplify maintenance
• Extremely lightweight due to the magnesium die-cast housing
Additional Products
• NovaStar Driver (Vivid Drive 23N or VIP Drive 43Nova; required)
Optional Accessories
• ArKaos Media Master Express + KN software
• F-Series Rig Bar (RB-F50CM, RB F100CM)
• VIP Drive 21N (alternative NovaStar driver)
Available Signal and Power Cables
• Signal cables (Neutrik®etherCON®CAT6 Signal Extensions)
• ETHERCONEXT18IN
• ETHERCONEXT5FT
• ETHERCONEXT10FT
• ETHERCONEXT25FT
• ETHERCONEXT50FT
• Power cables (Neutrik®powerCON®Power Extensions)
• POWERCONEXT18IN
• POWERCONEXT5FT
• POWERCONEXT10FT
• POWERCONEXT25FT
• POWERCONEXT50FT

4
Vivid 4 X4 User Manual Rev. 1
Introduction
Product Overview
Removable HandlesAlignment Conical (x2)
Alignment
Magnets
(x4)
FemaleSpeego
Connection
MaleSpeego
Connection Test Button Power/Signal Indicator LEDs
Seetronic
Powerkon®
In
Seetronic
Powerkon®
Out
Seetronic Etherkon®
Signal Through Ports
Alignment
Magnet
(x4)
Alignment
Magnets
(x4)
Alignment Conicals
FemaleSpeego
Connection

5
Introduction
Vivid 4 X4 User Manual Rev. 1
Pixels per Panel
Each pixel is 1 tri-color LED. The following table provides the pixels per panel in each Vivid 4. For detailed
specifications, refer to the Technical Specifications table at the end of this User Manual.
Parameter Vivid 4
Pixels per Panel 104 x 208
Total Pixels per Panel 21,632
Pixels per LED Module 52 x 104
Total Pixels per LED Module 5,408
LED Module Dimensions 250 x 500 mm
To calculate the number of panels, horizontally and vertically, supported by a
single Vivid Drive 23N, you will use:
• The number of pixels per panel.
• The screen resolution you would like to use for your video wall display.
The Vivid Drive 23N is required to operate a Vivid 4 video wall system. Diagrams
of how the Vivid 4 panels and the Vivid Drive 23N connect follow later in this
manual. For detailed information about the Vivid Drive 23N and panel calculation
examples, refer to the Vivid Drive 23N User Manual.
LED Module

6
Vivid 4 X4 User Manual Rev. 1
Introduction
Product Dimensions
1.34 in
34 mm
2.56 in
65 mm
39.37 in
1000 mm
37.17 in
944 mm
17.48 in
444 mm
19.69 in
500 mm

7
Setup
Vivid 4 X4 User Manual Rev. 1
3. Setup
AC Power
Each Vivid 4 has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC,
50/60 Hz. To determine the power requirements for each Vivid 4, refer to the label affixed to the product.
You can also refer to the Technical Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation. For more
information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetdj.com.
AC Plug
Each Vivid 4 comes with a power linking cord to connect power between panels and a power input cord.
This cable has a Seetronic Powerkon®connector to connect to the Vivid 4 and an Edison plug for power
input.
Power Linking
All Vivid 4 panels support power linking. Refer to the following table for specifications on each panel.
• Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
Voltage Vivid 4 Products
@ 120 V, 60 Hz 7
@ 230 V, 50 Hz 13
Please refer to all applicable local codes and regulations for the proper installation
of this product.

8
Vivid 4 X4 User Manual Rev. 1
Mounting
4. Mounting
Orientation
Each Vivid 4 is constructed of a die-cast magnesium alloy. This ensures each panel is stable and easy to
install. Each panel also has a convenient built-in handle located on the top and bottom, backside of the
panel along with two alignment conicals on the top. This combination enables you to easily pick up and
securely hold each panel while mounting and working with the panels.
The Vivid 4 can be assembled to provide any number of modular designs. The panels on the top can be
securely hung from a truss or other stable surface. Always hang in a safe position with adequate space for
ventilation, configuration, and maintenance.
Chauvet recommends following the general guidelines below.
• When selecting an installation location, consider ease of access for operation and routine
maintenance.
• Make sure to hang away from any flammable material, as indicated in the Safety Notes section.
• Never mount in places where rain, extreme temperature changes, or restricted ventilation may
affect it.
• Makesurethatthestructureandattachmentpointstowhichyouarehangingthepanelscan support
the weight.
• Make sure that all load-bearing hardware used can support the weight.
• See the Technical Specifications for the weight requirement of each Vivid 4.
Truss Installation
Refer to the following diagram for truss installation. Chauvet offers the F-Series Rig Bar (sold separately)
specifically designed for hanging the panels.
The illustrations above are examples only. Please refer to all applicable local codes
and regulations for the proper installation of the product.
Attach to Truss Using Optional F-Series Rig Bar

9
Mounting
Vivid 4 X4 User Manual Rev. 1
RB-F50CM Rig Bar Dimensions
RB-F100CM Rig Bar Dimensions
1.97 in
50 mm
2.76 in
70 mm
0.39 in
10 mm
19.69 in
500 mm
16.38 in
416 mm
2.56 in
65 mm
1.38 in
35 mm
1.18 in
30 mm
Sold Separately
Sold Separately
2.76 in
70 mm
1.97 in
50 mm
0.39 in
10 mm
39.37 in
1000 mm
36.06 in
916 mm
3.31 in
84 mm 1.38 in 35 mm
1.18 in
30 mm
2.56 in
65 mm

10
Vivid 4 X4 User Manual Rev. 1
Mounting
Rig Bar/Panel Assembly
1. Insert alignment conicals into the alignment holes and allow magnets to connect.
2. Insert the Rig Bar Speego locking bars into the female Speego connections on the Vivid 4.
3. Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.
4. Twist the tightening knob clockwise until Vivid 4 is secure to Rig Bar.
5. To detach the Rig Bar from the Vivid 4, reverse the previous steps.
• The alignment magnets on the Vivid 4 and F-Series Rig Bar are designed to
temporarily hold the weight of the panel to allow the user to properly align and
tighten the panel into place.
• Either side ofthe Vivid 4 with female Speego connections can attach to the F-Series
Rig Bar, but only the short side has alignment conicals and magnets. When
attaching the long side of the Vivid 4 to the Rig Bar, take care to ensure that the
pixels across the video assembly are aligned properly.
Warning! The magnetic attachments are not load-bearing, and are intended for
alignment assistance only. Do not release panel until the hanging hardware has been
fully secured.
Bottom View
Top View
Alignment Magnets
Alignment Holes
Male Speego Connection
Rig Bar
Locking Latch Rig Bar Locking Tab
Rig Bar Speego
Spring
Knob Tightening Knob
Locking Bar
Alignment Conical (x2)

11
Mounting
Vivid 4 X4 User Manual Rev. 1
Alternative Rig Bar/Panel Assembly
The Vivid 4 can be mounted horizontally with the RB-F100CM Rig Bar. Follow the same instructions as in
Rig Bar/PanelAssembly, but take extra care, as the long side of the product has neither alignment conicals
nor magnets.
When mounting horizontally with the RB-F100CM, one of the Rig Bar Speegos will not be used.
Mounting to Truss with Chauvet CT-APP
The Vivid 4 (with F-Series Rig Bar) can be mounted to truss using the CT-APP from TRUSST®. See the
Quick Reference Guide for the CT-APP at trusst.com for more information.

12
Vivid 4 X4 User Manual Rev. 1
Creating a Modular Design
5. Creating a Modular Design
Vertically Joining the Panels
Each Vivid 4 can be easily joined vertically to a truss using an optional rig bar and the 2 female Speego
connections located at the top corners of each panel. Use the male Speego connections at the bottom of
each panel to connect additional panels. These connectors stay recessed when not being used.
Male Speego
Spring Knob
Tightening Latch
Locking Bar

13
Creating a Modular Design
Vivid 4 X4 User Manual Rev. 1
Vertical Panel Connection
Use the following instructions to join panels vertically:
1. Line up the alignment conicals at the top of each panel, and the alignment magnets at the top and
bottom of each panel.
2. Push male Speego connections into female Speego connections.
3. Turn the spring knobs clockwise 90°.
4. Turn the tightening latches clockwise 180°, until secure.
Warning! The magnetic attachments are not load-bearing, and are intended for
alignment assistance only. Do not release panel until the hanging hardware has
been fully secured.