Checkpoint 600 User manual

Classification [Restricted]
© 2016 Check Point Software Technologies Ltd. All rights reserved.
For a list of our trademarks, please refer to: www.checkpoint.com/copyright.html.
For a list of our Third Party Copyright notices, please refer to: www.checkpoint.com/3rd_party_copyright.html
600/1100 Appliance Single/Double
Rack Mounting Tray Installation
Classification: [Restricte d]
Restricted
2016
Rack Mounting Tray
Install your 600 or 1100 Check Point Appliance on a specially-designed tray that
is rack-mounted on a 1U rack.
The illustrations in this document refer to these components:
Number Name Purpose Quantity
1 Nut Cage Tray > Rack 4
2 Phillips Pan Head Screw Tray > Rack 4
3 Flat Washer Tray > Rack 4
4 Bracket Appliance > Tray 1
5 Lock Screw Appliance > Tray 4
6 Phillips CSK Head Screw Appliance > Tray 4
7 Wing Nut Bracket > Tray 2
8 Screw Kit 1
9 Tray Rack mounted tray 1

2
Installation
To install the rack mounting tray:
1. Remove the 4 rubber bases from the bottom of the appliance.
2. Locate the tray (#9).
3. Place the appliance on top of the screw holes in the tray.
4. Use the lock screw (#5) and the Philips CSK head screw (#6) to fix the
mounting holes in the bottom of the appliance firmly to the tray.
5. Push the appliance forward until it is on the same line as the shelf ears.

3
•Screws configuration for installing two appliances on the tray:

4
•Screw configuration for installing a single appliance on the tray:

5
To install the bracket:
1. Retrieve the bracket (#4) and connect it to the tray with 2 wingnuts (#7):
2. Retrieve:
•4 additional screws (#3)
•4 washers (#2)
•4 nut cages (#1)

6
3. Attach the tray ears to a 1U rack: