Chef-Master HEC825 User manual

Chefmaster Blender 2 Litre
Instruction Manual
Model
HEC825 – Blender 2 Litre - Digital
HEC826 – Blender 2 Litre - Manual

2
Thank you for purchasing your Chefmaster Blender. To make full use of
the product please read this manual carefully before using the product
and keep it safe for future reference.
Safety Tips
If you find any damage when the product is unpacked, contact your
Chefmaster supplier within 24 hours of receipt of goods.
Repairs should always be carried out by a qualified technician.
Do not submerge the blender motor in water or any other liquid.
Do not remove food debris from the product until the blade has come to
a complete stop.
Do not use the appliance outdoors or place it in environments where
there is open fire such as gas stove or kerosene stove in use.
Always switch off and unplug the unit before cleaning.
If the power cord becomes damaged it must be replaced by a qualified
technician.
This product is not designed to be used by persons with reduced
physical or mental capabilities, lack of experience or knowledge, unless
they are given suitable supervision, this includes children.
The machine is a high-power plug into a grounded outlet. Don’t use an
adapter. Don’t use an extension cord.
To reduce the risk of personal injury and prevent damage to the blender,
DO NOT touch or insert utensils into blender container while operating
blender.
Do not touch the control panel with a sharp instrument this may cause
cracking, water seepage or damage to the internal control circuit.
Do not start the blender when there is no ingredient in the container.
Pack Contents
1 x Chefmaster Blender
1 x Jug with Lid
1 x Pusher

3
Product Components
Before You Begin
Before using the Chefmaster Blender, ensure that the unit is wiped with a clean,
damp cloth to remove any dirt or dust. Fill the jug with water to rinse the
components. Dry thoroughly with a soft absorbent cloth.
Note: DO NOT submerge the base of jug / the motor base into water or
use water sprays to clean it. They should only be cleaned with soft cloth.
Preparation
Remove all packaging including all protective plastic, from your
Chefmaster Blender.
With the power switch on OFF position, place container on the blender.
Be sure the speed dial in leftmost position pointing at “Low-speed” for
Blender with mechanical switches HEC826.
Plug the blender into power source.
Put ingredients into the container. The ingredients should be put in: Soft
ingredients > Hard ingredients > Liquid ingredients.
Cover the jug with lid and be sure the jug is tightly sealed.
HEC825 HEC826
.
.
.
.
.

4
Operation
HEC825 – Digital Blender
Press “ON/OFF” button and the display is on.
Preset timer with “+” to add 30 seconds or “-“ to reduce 30 seconds for
each press.
Preset speed with button “1”,“2”,“3” or “4”.
1 = 15,000 rpm
2 = 20,000 rpm
3 = 25,000 rpm
4 = 30.000 rpm
Press “START/STOP” button and the blender starts blending.
The blender will stop automatically when time is up or “START/STOP
(“ON/OFF”) button is pressed during the blending process.
For instant high-speed blending, press “PULSE” button and hold
until the required result is achieved. Release the button and the
blender will run at the original speed.
After the blending process is completed, press “ON/OFF” button
to switch off and the display is off. The ingredients are ready to be
taken out from the jug when the blades stop completely.
HEC826 – Manual Blender
Turn the power switch to “ON” position.
Rotate the speed dial gradually in clockwise and the appliance will start
blending.
For instant high-speed blending, lift the pulse switch up to “II” position
and hold until required result is achieved. Release the switch and it
will return to “0” position automatically.
After all ingredients are blended, rotate the speed dial to leftmost
pointing at “Low speed” and turn the power switch to “OFF” position.
The ingredients are ready to be taken out from the jug when the blades
stop completely.

5
Cleaning & Maintenance
Always disconnect the blender from the electricity supply before
cleaning
Be careful when cleaning the blade – It is extremely sharp!
Clean the inside of jug / lid / pusher with warm soapy water.
DO NOT submerge the jug / the motor base in water or use water
sprays to clean it. They should only be cleaned with soft cloth.
Dry before the product is stored.
Always clean and check your Chefmaster Blender daily. Inspect the jug
and blade assembly to ensure they are in good condition. DO NOT use
broken, chipped, or cracked jug. DO NOT use wear, nicks, or broken
blades.
Troubleshooting
Condition
Possible Cause
Solution
The unit is
plugged in but
not working
1. The unit is not switched on
2. The plug or lead are damaged
3. The fuse has blown
4. Overheat protection is
triggered
5. The jug is not properly
installed
1. Check the unit is correctly
plugged in and switched on
2. Contact your Chefmaster
distributor
3. Replace the fuse
4. Place the unit in a
ventilated place, cool it for
about 20 minutes, then press
“reset” button on the base of
motor
5. Place the jug on motor base
until hearing a “click” sound
Excessive
vibration
The motor base is not placed
evenly
Place the motor on a flat and
steady surface
The jug is not installed properly
Clean the motor base with soft
cloth and install the jug again
Excessive amount of ingredients
is put in the jug
Adjust the amount of
ingredients
Overflow
The amount of liquid exceeds
the jug
Adjust the amount of liquid to
around 1.5-1.8L
Lid is not installed properly
Cover the lid again, ensure
the jug is tightly sealed

6
Technical Information
HEC825 – 2 Litre Blender Digital
Voltage 220~240v 50Hz
Power 2200watt
Weight 5.5kg
Dimensions 230mm x 254mm x 492mm (W x D x H)
HEC826 – 2 Litre Blender Manual
Voltage 220~240v 50Hz
Power 2200watt
Weight 6.5kg
Dimensions 252mm x 255mm x 520mm (W x D x H)
Chefmaster Blender is supplied with a 3 pin plug and lead with a 13
amp fuse.
Appliance must be earthed.
If in doubt contact a qualified electrician or your Chefmaster distributor.
Disposal
Under WEEE regulations this product must not be disposed of as household
waste. To prevent damage to the environment and humans this product must
be disposed of in an approved and environmentally friendly recycling process.
For more information on how to dispose of this correctly please contact your
Chefmaster distributor or local authority responsible for waste disposal.
Compliance
All Chefmaster parts and products have under gone a stringent testing process
to ensure that comply with all European standards and specifications.
All Chefmaster products carry the CE approval symbol.