Chefman RJ19-RS1-BP User manual

1
®
Cordless Power
IMMERSION
BLENDER SET
USER GUIDE
Safety Instructions
Features
Operating Instructions
Blending Tips
Cleaning and Maintenance
Notes
Terms and Conditions
Warranty Registration
RJ19-RS1-BP

2
READ ALL INSTRUCTIONS BEFORE USE
For your safety and continued enjoyment of this product, always
read the instruction manual before using.
COOKING FORWARD™
Welcome!
Whether this is your rst Chefman®appliance or you’re already part of our family,
we’re happy to be cooking with you! With your new Cordless Power Immersion
Blender Set, blending has never been easier, faster, or more convenient. Purée a
soup right in the pot with no worry about a power cord, effortlessly mix smoothie
ingredients to delicious perfection, or whip cream to voluminous heights in seconds.
We designed the blender to offer ample power with one-touch variable speed
control—simply squeeze the speed-control button a little harder for faster blending.
The stainless-steel shaft detaches with the touch of a button and is dishwasher-safe.
The blender holds a charge up to a year, and a full charge provides almost 20 minutes
of use. Color-coded LED lights let you know when you need to recharge the blender.
We know you’re excited to get blending, but please take a few minutes to read our
directions, safety instructions, and warranty information.
From our kitchen to yours,
The Chefman®Team

3
4Safety Instructions
8Features
12 Operating Instructions
18 Blending Tips
19 Cleaning and Maintenance
20 Notes
22 Terms and Conditions
24 Warranty Registration
CONTENTS

4
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. Be sure to detach the USB cord before using. Detach the shaft from the motor
housing before putting on or taking off parts, and before cleaning.
3. To protect against the risk of electrical shock, do not put the motor housing in water
or other liquids.
4. This blender should not be used by or near children or individuals with certain
disabilities.
5. This appliance is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning the appliance by a person
responsible for their safety.
6. Children should be supervised to ensure that they do not play with the appliance.
7. Avoid contact with moving parts.
8. Never put the blender on or near a burner, in an oven (regardless of whether it's hot
or not), or the motor housing in a dishwasher.
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING:

5
9. Do not operate the blender if damaged during use or after the product has
malfunctioned. Contact Chefman®Customer Support for replacement, analysis,
or repair.
10. Do not use outdoors or for anything other than intended use.
11. WARNING: The mixing blades are sharp. Handle with care when using and cleaning
the product.
12. Always place the blender on a rm, stable surface when not in use.
13. The use of attachments not recommended or sold by Chefman® may cause re,
electrical shock, or injury.
IMPORTANT SAFEGUARDS

6
IMPORTANT SAFEGUARDS
14. Never use abrasive cleaning agents or abrasive cloths when cleaning the blender.
15. Do not use ngers to scrape food away from the cutting blade while the blender
is under power. Serious injuries may occur.
16. Use the blender only when it is completely assembled.
17. Before using for the rst time, remove all packaging and wash and dry parts.
18. Ensure the unit is fully charged prior to rst use.
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING:

7
DO NOT PLACE THE APPLIANCE ON A STOVETOP OR ANY OTHER
HEATABLE SURFACE, EVEN IF THE STOVETOP IS NOT ON. DOING SO IS
A FIRE HAZARD.

8
1. LED Charge Indicator Ring
changes color to indicate charge level
2. Variable Speed–Control Button
pressure adjusts blending speed
3. Motor Housing
with comfort grip
4. Attachment–Release Button
releases attachments from housing
5. Blender Blade Shaft
stainless steel and dishwasher-safe
6. Blender Blade
stainless steel
7. Blender Blade Guard
covers blade while in storage
8. Blender Blade Edge Guard
prevents scratching of bowls and
pans
9. USB Port
covered to keep out debris
10. Safety–Lock Button
must be pressed with speed-control
button to use blade
11. 5V 2A Charger Adapter
12. Type C USB Cord
FEATURES

9
FEATURES
13. Chopper bowl
250ml; 1 cup
14. Chopper blade
15. Chopper lid
16. Whisk
17. Whisk connector
18. Masher
19. Masher connector
20. Mixing beaker
21. Beaker lid
22. Storage Case (not shown)

10
FEATURES
Blue
50%–100%
(up to 18 minutes of use)
Orange
20%–50%
(time to recharge)
Red
5%–20%
Red and Blinking
5% or less
LED CHARGE INDICATOR COLORS

11
NOTES

12
OPERATING INSTRUCTIONS
BEFORE FIRST USE
For best results, follow these steps before using your Cordless Power Immersion Blender Set
for the first time.
1. Remove all packaging materials and check to ensure that all parts and accessories
are accounted for.
2. Wipe down the motor housing, chopper lid, whisk connector, and masher connector
with a damp cloth to remove any packaging residue.
3. Wash the blending shaft, mixing beaker, chopper bowl and blade, whisk, and masher
with warm, soapy water, and dry thoroughly. (These parts are also all top-rack
dishwasher-safe.) WARNING: The blades are sharp. Handle with care both when using
and cleaning.
4. Charge the blender according to the directions below.
HOW TO CHARGE THE BLENDER
One full charge will provide up to 18 minutes of blending (less if blending thicker/harder
foods) and will hold for a year. IMPORTANT: For best results, use the included USB cord and
charger adapter when charging.
1. Plug the smaller pin on the blender’s charging cord into the blender's USB port.
Insert the larger pin into the charger adapter.
2. Plug the charger adapter into a grounded electrical outlet. Let charge for 130 minutes
(about 2 hours) for a full charge.

13
OPERATING INSTRUCTIONS
HOW TO ASSEMBLE THE BLENDER
The blender is easy to assemble and disassemble. IMPORTANT: Do not press the safety
button while attaching or removing parts or accessories.
1. If you like, before attaching the shaft, put on the pan edge guard to prevent the blade
from scratching pans or bowls while blending.
2. Align the motor body housing with the blending shaft and push the pieces together
until you feel (and hear) them click together. To remove the shaft, simply press the
shaft-release button.
3. During charging, the LEDs will slowly pulse. The colors will change from red to orange
to blue as the blender becomes more charged. The blue lights will pulse once 85%
charged and will become steady once the blender is fully charged. A full charge will
provide up to 18 minutes of use. NOTE: You can use the blender for a quick task
before it is fully charged.
4. Remove the USB cord from the blender. (Do not use the blender while plugged in.)
Use right away or store. If storing, slide the blade guard onto the blade for added
safety.
5. During use, the LEDs will be a steady blue while the charge is above 50%. When the
charge falls below 50%, the ring will turn orange, which is when you should recharge
the blender. It will turn solid red below 20%. If the blender falls below a 5% charge, it
will blink red before powering off.
6. To check the blender’s charge when not in use, simply press the speed-control button
without pressing the unlock button.

14
OPERATING INSTRUCTIONS
HOW TO USE THE BLENDER
The blender’s blade is specially designed for processing and pureeing all kinds of foods,
including salad dressings, smoothies, and sauces. It can also whisk dry ingredients and chop
foods like onions and nuts.
1. Ensure the food to be processed is in a sufciently deep container to inhibit splatter.
NOTE: Remove fruit pits, bones, or other hard items from the blending mixture as they
can damage the blade.
2. Attach the blending shaft to the motor housing, if necessary.
3. With a loose grip, grab the blender with one hand just below the top of the motor
housing, but do not press any buttons.
4. Lower the shaft deeply into the mixing container. Place the other hand on the
container (if hot, use the handle) to stabilize it, if necessary. WARNING: Use caution
when blending hot ingredients. Never leave the blender in a hot pot or lean it against
the sides.
5. When ready to blend, squeeze both the speed-control button in front and the safety-
lock button at the top back of the blender. Your palm should be able to easily press
the safety-lock button while your nger (or ngers) presses the speed-control button.
6. To adjust the speed, vary the pressure on the speed-control button. The harder you
press, the faster the blade will spin. To pulse, press and release the button.
7. As you blend, move the shaft slightly up, down, and around in order to blend evenly.
To avoid overheating the motor, do not run the blender continuously for more than a
minute or so. Let it rest briey before blending again.

15
OPERATING INSTRUCTIONS
8. To stop blending, release the speed-control and safety-lock buttons. Do not lift the
blender out of the mixture until the blade has stopped. WARNING: If a piece of food
becomes lodged in the blade, remove the blending shaft before trying to dislodge it.
Then use a spatula or similar utensil to carefully remove the food. Avoid using your
ngers. After the stuck food has been removed, reattach the shaft, and continue
blending.
HOW TO USE THE CHOPPER
1. Be sure the chopper blade is fully seated on its pin in the chopper bowl.
Add your ingredients to the chopper bowl.
2. Put the chopper lid on the bowl, aligning the tabs on the side, then press down and twist
clockwise; you will hear a click when it locks.
3. Align the motor body housing with the chopper lid and push the pieces together until you
feel and hear them click together.
4. Squeeze both the speed-control button in front and the safety-lock button at the top back
of the blender. Your palm should be able to easily press the safety-lock button while your
nger (or ngers) presses the speed-control button.
5. To adjust the speed, vary the pressure on the speed-control button. The harder you press,
the faster the blade will spin. To pulse, press and release the button.
6. To stop chopping, release the speed-control and safety-lock buttons.

16
16
OPERATING INSTRUCTIONS
HOW TO USE THE WHISK
1. To assemble the whisk: Insert the whisk shaft into the socket of the whisk connector until
you feel and hear them click together.
2. Align the motor body housing with the whisk connector and push the pieces together until
you feel (and hear) them click together.
3. Squeeze both the speed-control button in front and the safety-lock button at the top back
of the blender. Your palm should be able to easily press the safety-lock button while your
nger (or ngers) presses the speed-control button. NOTE: Avoid using the stainless-steel
whisk in non-stick pans, as it may scratch the nish.
4. To adjust the speed, vary the pressure on the speed-control button. The harder you press,
the faster the whisk will spin. To pulse, press and release the button.
5. To stop whisking, release the speed-control and safety-lock buttons.

17
OPERATING INSTRUCTIONS
HOW TO USE THE MASHER
1. To assemble the masher: Seat the masher connector onto the pin of the masher itself,
then twist clockwise until you feel and hear the pieces click together.
2. Align the motor body housing with the masher connector and push the pieces together
until you feel (and hear) them click together.
3. Squeeze both the speed-control button in front and the safety-lock button at the top back
of the blender. Your palm should be able to easily press the safety-lock button while your
nger (or ngers) presses the speed-control button.
4. To adjust the speed, vary the pressure on the speed-control button. The harder you press,
the faster the masher blade will spin. To pulse, press and release the button.
5. To stop mashing, release the speed-control and safety-lock buttons.

18
BLENDING TIPS
1. Cut solid foods into uniform sizes for easy blending and consistent results.
2. To avoid splatter, do not turn on the blender, whisk, or masher until the blade/whisk
is beneath the surface of the food; then turn the blender off before removing it.
Never take the blender, whisk, or masher out of a mixture while it is running.
3. Blend in short spurts to avoid overheating the motor; do not run the blender
continuously for long periods. If the blender overheats, it will automatically turn
off (the red LEDs will blink). After a short rest, it should come back on.
4. Leave room at the top of the container as blending can cause the liquid level to rise
and may overow if too full. Tall, sturdy containers, such as the included mixing
beaker or quart containers, can also help prevent overow.
5. Move the blender up and down, keeping the whisk submerged at all times, for
mixtures in which you want to incorporate air, such as whipped cream. Carefully
tilt the mixing container as needed to ensure the whisk reaches all the ingredients.
6. For recipes calling for ice, use crushed ice (not whole cubes) for best results.

19
CLEANING AND MAINTENANCE
With top-rack dishwasher-safe attachments, the immersion blender is easy to clean.
Follow these steps for safety and best results. IMPORTANT: Make sure that the safety-
lock button is not being pressed while attaching or removing parts or accessories.
1. Before cleaning, detach the shaft from the housing by pressing the shaft-
release button. Remove the blade edge guard if necessary. WARNING: Never
clean the blending shaft while still attached to the motor housing,
or serious harm can occur.
2. The detached blending shaft, chopper bowl and blade, whisk, masher,
beaker, and beaker lid are all top-rack dishwasher-safe. They can also be
carefully washed by hand with warm, soapy water. CAUTION: The blades
are sharp. Handle with care when cleaning the product.
3. Clean the motor housing, chopper lid, whisk connector, and masher
connector with a sponge or damp cloth only. Never immerse them in water
or wash in the dishwasher. Do not use abrasive cleansers, which could
scratch the nish.
4. Dry thoroughly and store the motor housing, blending shaft, whisk, and
masher (and their connectors) in the storage case. The chopper bowl and lid
can be stored inside the beaker.
5. Cover the blade with its blade guard before storing it in the storage case.
6. The blender will hold its charge for up to a year. For best results, recharge
the blender as soon as the LED indicator lights turn orange.
7. Always dispose of battery-operated products according to federal, state,
and local regulations. Contact a recycling agency in your area for recycling
locations.

20
NOTES