Chiayo RP-5016M User manual

Operation manual
CHIAYO ELECTRONICS CO., LTD.
RP-5016M
UHF Interlinking Transmitter Module

1
RP-5016M UHF Interlinking Transmitter Module
Parts and functions
1.Channel indicator
2.Antenna connector (TNC type)
3.Channel selectors
4.Power switch.
5.Unit GAIN control
6.3.5mm audio input socket
7.AUX IN GAIN control
8.Output power switch (on the PCB)
Changing channels
Press LEFT button to increase the channel
number.

Press RIGHT ▼button to decrease the channel
number.

Audio input and gain control
1 Connect your MP3/MP4 player to the AUX IN
socket on the panel with 3.5mm phone cable.
 
2 Use a mini screw driver to adjust the volume of
the input audio.

HI LOW
RP-5016M
RP-5016M
0 6
RP-5016M
0 6
RP-5016M
0 7
RP-5016M
0 6
RP-5016M
0 6
RP-5016M
0 5
RP-5016M
0 6
RP-5016M
0 6

2
Instructions
Adjust internal audio gain level
Use a mini screw driver to adjust the volume of audio sources in the master unit.

Output power setting
LOW position for low output power and HI for high output power.
Low output power will reduce the RF transmission distance and high
output power will extend the possible RF transmission distance.
If the module is installed on battery-powered amplifiers, remember
HIGH output power places slightly more load on the battery and will
reduce operating duration faster than LOW output power.
RP-5016M
0 6

CHIAYO ELECTRONICS CO.,LTD.
Http://www.chiayo.com.tw｜Email: [e-mail]
Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan
Tel: [phone]｜Fax: [phone]
Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan
Tel: [phone]｜Fax: [phone]