Chicago Electric 31309 Quick reference guide

Unpacking
This Angle Grinder comes fully assembled. When unpacking the Angle Grinder, check to make sure
the following parts are included. If any parts are missing or broken, please call Harbor Freight Tools at
the number on the cover of this manual. Refer to parts diagram at end of manual. Sort all hardware by
like kinds before assembling.
Item # Description Qty
1 Grinder Body 1
2 Side Handle 1
3 Wrench 1
4 Grinding Wheel 1
5 Spare Brushes 1
Warning:
There are certain applications for which this tool was designed. Harbor Freight Tools strongly
recommends that this tool not be modified and/or used for any application other than which it was designed.
All accessories must be rated for at least the RPM speed recommended on the tool’s warning
label. Wheels and other accessories running over rated speed can fly apart and cause injury.
For safest operation, it is recommended that only these accessories be used with this product:
Abrasive Cut-Off Discs and Wheels Flap Wheels
Wire Brushes Wire Wheel Brushes
Always use an approved and proper guard when using the above mentioned accessories. Each
accessory must have the correct arbor size and must fit properly on the shoulder bushing. Make
sure accessories are tightened down securely.
CAUTION: NEVER INSTALL A CARBIDE TIPPED OR
STEEL CIRCULAR SAW BLADE FOR USE ON THIS
ANGLE GRINDER. NEVER INSTALL A WOOD CARVING
BLADE, CARVING DISC WITH SAW CHAIN CUTTERS, OR
A CUTTING CARVING DISC ON THIS ANGLE GRINDER.
5 Rev 03/01 REV 06/03 #31309